FITFIU MC-120 Treadmill Black Instruction Manual

FITFIU MC-120 Treadmill Black Instruction Manual

HELLO

Thank you for trusting FITFIU Fitness!

Whether you are just starting out in the world of fitness, you are an amateur athlete or you already have a background in the world of sport… FITFIU will be your ally in getting in shape! Doing physical exercise offers multiple benefits and the possibility of doing it at home will make it more accessible to be able to train constantly.

This product has been designed for cardiovascular training at home. Depending on your needs, you can run or walk, adapting the speed of the treadmill to vary the intensity. You will be able to see your physical performance information in real time on the treadmill’s LCD screen.

We hope you enjoy your FITFIU Fitness experience to the fullest!

PRECAUTIONS FOR USE

Before using this tape we recommend that you carefully read all the precautions for use as well as the instructions in this manual. Please note that many of the questions you may have regarding this product can be answered here. Keep this document for future reference. Before starting any exercise programme, consult your doctor to check your state of health, especially in the case of people over 35 years of age and those who have had previous health problems.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction by a person responsible for their safety.
• This appliance is intended for domestic use.
• The appliance may only be used by one person at a time. The maximum user weight is indicated in the “Technical specifications” section.
• Wear appropriate clothing and footwear for exercise. Do not wear loose-fitting clothing that could get caught in any part of the product.
• Be sure to warm up before physical activity to avoid muscle injuries. Once you have finished exercising, you should also perform a relaxation routine.
• Persons with an implanted pacemaker, defibrillator or any other electronic device are cautioned that use of this heart rate sensor is at their own risk.
• The use of heart rate sensors is not recommended for pregnant women.
• WARNING! Systems that calculate heart rate are not always accurate in their measurements. Overexertion can lead to serious, even fatal, injuries. If you experience dizziness, nausea, chest pain or any other abnormal symptoms, stop exercising immediately and consult your doctor before continuing your training.
• The device should be placed on a stable, flat, horizontal surface. Do not place it in damp or wet places.
• Do not use the product outdoors.
• Keep feet and hands away from moving parts.
• Do not carry out any adjustments or maintenance that are not specified in this manual. If you have any problems with the appliance, contact our technical service.
• Replace all worn or defective parts immediately.
• Do not use accessories not recommended by the manufacturer
• Never place your hands or feet under the treadmill.
• At the end of the exercise, wait for the treadmill to come to a complete stop before getting off.
• At the end of the exercise, remove the safety key from the console and store it in a place out of the reach of children.
• Always stop the machine with the main switch.
• To make an emergency exit, grasp the grab bars and place your feet on the footrests.
• To make an emergency stop, remove the safety key.
• It is the owner’s responsibility to ensure that all users of the product are informed of the precautions for use.

ATTENTION: Recommended use at 30 minute intervals.

NOTE: In the event of incorrect use, FITFIU Fitness declines all responsibility for damage to property and personal injury.

PRODUCT DESCRIPTION

Technical characteristics

• max. user: 100kg
• max power: 600 W
• max. voltage: 220 – 240V
• packaging: 16,5 x 64,5 x 150 cm
• product weight: 24 Kg
• use: 3h / week
• vAPP COMPATIBLES KINOMAP

Contents of the box

• base structure
  

• cellphone holder

• nuts ans screws

•  6 mm Hexagon wrench

• instructions

• remote control

• silicone oil

• round knob

ASSEMBLY

Step by step

Lift the vertical frame according to the direction of the arrow and while unfolding it, tighten the sheet metal with the main frame with the round knobs.

Insert the cell phone holder into the slot of the frame in the direction indicated by the arrow.

After connecting the belt to the power, the display lights up, press the start button or the “” button on the remote control to start the machine!

NOTE! : The safety key must be placed on the yellow sticker in the center, below the button, for the tape to start; if the display shows “- – – -”, it means that the safety key is not placed or is not in place.

Emergency stop function: when the safety key is off, the power cord is disconnected and the weak part maintains power. Operation is not controlled by software. For your safety, be sure to use the safety key during use.

NOTE! Tighten all screws and check for omissions before connecting to the power cable

Insert the remote control battery: Turn the battery cover 90° to the left and remove the battery cover

Insert the 3V button cell battery with the model number “CR2032” or “CR2025” in the battery box, and make sure that the “+” pole of the battery is facing in the direction of the battery cover; cover it in the card slot and turn it 90° clockwise. Once the cover is closed, the single battery head should respond to its lock icon.

Once the battery is in place, pressany key on the remote control, and the light on the front of the remote should come on. If the light does not come on, it means that the remote control battery is not installed correctly, and the above actions need to be repeated.

PRODUCT USE

Magnetic emergency stop system

The product is equipped with a “magnetic emergency stop system”. This safety strap must be attached to the console for it to work. It is designed to attach to clothing so that if you walk off or fall off the treadmill, it will stop automatically, helping to prevent injury.

Before starting a workout, make sure the safety strap is properly attached to the console and that the clip is securely attached to your clothing.

WARNING! If the device is switched on, but the safety strap is not connected, “- – -” appears on the display and the device cannot be started.

Commissioning

The equipment has a computerised display that provides you with controls for the operation of the unit, as well as information about the workout, duration, speed, distance travelled, etc. To use the equipment:

1. Plug the equipment into a mains socket.
2. Turn the power switch, located on the front of the unit, to the “ON” (“I”) position.
3. Fix the safety strap to the console.

Your tape is ready!

BEWARE! Always stand on the side rails before starting the machine. Never stand on the belt and then start the machine.

Display
The display shows current information, such as current speed, elapsed or remaining time, calories remaining, etc.

Safety key function
Unplug the safety key and window display “E7” the treadmill stop running, and beep alarm sound appears, the electronic watch display 2 seconds when put on the safety key, all data zero.

MAINTENANCE

General

• Make sure that you have switched off the device and disconnected the power plug before maintenance.
• Do not use abrasives or solvents to clean the tape, as this may damage the finish and functionality.
• Take care that excessive moisture does not enter the display panel as this may damage it.
• Keep the equipment, especially the display console, out of direct sunlight.
• To clean around the plug and control panel use a soft dry cloth, never use a wet cloth.
• Do not use the treadmill in a wet or dusty environment as this may cause leakage or mechanical failure.
• Use this product on a flat surface

Daily maintenance
Clean regularly to remove dust and sweat to protect the components. You should clean both sides of the exposed part of the belt to avoid residue. Use a damp cloth with soap to clean the ribbon. Do not use a cleaner. Wipe the sweat off the handrail and the strap after use

Lubricant use
The platform and treadmill have been lubricated at the factory with an anti- static lubricant, but we can re-lubricate it. Suggestion

• Use of – 3 hours per week—–lubricate every 6 months.
• Use 4-7 hours per week—–lubricate every 3 months.
• Use of + 8 hours per week—–lubricate once a month

ATTENTION! Do not lubricate more than necessary. Remember that regular and reasonable lubrication will increase the life of your treadmill.

Adjusting the belt tension
If the belt is too loose, insert the Allen key into the adjustment hole on the left side of the belt, turn it 1/4 turn clockwise and then adjust the right side 1 turn clockwise, repeat 4 times, note that the left and right should be adjusted synchronously, so that the belt can be tightened and does not drift off center. If the tape is too tight, adjust the left and right synchronously counterclockwise.

Belt deflection adjustment
To improve the use of the belt, you can adjust it if you notice a deviation of the direction after continuous use. To do this, adjust the bolts at the front of the base with the Allen key provided as shown in the picture below.

In case of left-hand deviation, tighten the left-hand screw clockwise or the right-hand screw anticlockwise.

In case of right-hand deviation, tighten the righthand screw clockwise or the left-hand screw counterclockwise.

WARNING! The belt should not be too tight as this can cause noise and possible damage to the engine.

Adjustment of the transmission belt
If the drive belt becomes loose, use the spanner clockwise to turn the bolt until the belt no longer slips..
WARNING! Frequently clean any objects or dust that may fall into the strap.

Correct arrangement of the ignition device
Do not touch the power plug or disconnect it with wet hands. When pulling on the plug, hold the plug by the plastic part, not directly on the cord. Do not place excessive weight on the cord. Do not wrap the cord around the machine to avoid damaging it. If the plug, cable or connection is loose, do not use the appliance.

TRANSPORT AND STORAGE

The hydraulic folding system of the belt is fast and safe. It also has two wheels for easy transport from one place to another in the house. Store the equipment in a clean and dry indoor environment. Never leave or use the unit outdoors. Make sure that the main switch is turned OFF (“O”) and the power cord is disconnected from the mains.

• Folding the Tape

• Unfolding the treadmill

TRANSPORT AND STORAGE disposal and recycling

GUARANTEE

This product is guaranteed for 3 years from the date of purchase. The warranty covers breakdowns and
malfunctions of components not considered as consumables*, provided that it is used in accordance with its intended use and according to the instructions in the manual. In order to claim under the warranty, proof of purchase (receipt or invoice) is required and the product must be complete and with all its accessories.

The warranty clause does not cover deterioration caused by wear and tear, lack of maintenance, negligence, incorrect assembly or improper use (knocks, non- compliance with power supply advice, storage, conditions of use, etc.). The consequences of the use of accessories or spare parts which are not original or not suitable for the assembly or modification of the appliance are also excluded from the guarantee.

for more information on the components covered by the warranty, visit the website www.fitfiu-fitness.com

ANNEX

TROUBLESHOOTING/PROBLEM SOLVING

safety strap in the correct location.
The tape skates| The tape is loose| Adjust the belt tension.
Treadmill oscillates when stepped on| A. Not sufficiently lubricated. B. It is too tight.| A. Lubricate the running board. B. Adjust the belt tension
Tape is not centred| The tension of the treadmill is incorrectly set on the rear wheel.| Adjust the belt alignment
Display shows: E00 or E07| The safety sensor is not in place.| Position the safety sensor in the correct place on
Display shows: E01 or E13| A communication problem has been detected between the drive disk and the console| Check the connections between the console and the disk drive. If the connectors or wiring are damaged, replace them.
Display shows: E02 or E06 or E10| A problem has been detected in the disk drive/engine.| Check that the mains supply is according to specifications. Check the drive unit and motor connections, if damaged, replace them
The display shows: E03| A problem has been detected with the speed sensor.| Check all connections, if the motor or control unit is damaged, replace it
The display shows: E04| Tilted belt, motor problem detected| Check all connections, if the motor or control unit is damaged, replace it.
The display shows: E05| The electrical protection has tripped| Check that the mains power supply is in accordance with the specifications. Make sure the treadmill is not snagged or unable to rotate because of an obstruction. Check all connections. Check the motor or control for short-circuit faults (usually indicated by a burning smell) and replace parts as necessary.
The display shows: E08| A problem has been detected in the control unit.| Check all connections, if the control unit is damaged, replace it
The display shows: E09| A stability problem has been detected.| Ensure that the machine is properly unfolded and placed on a flat and level surface. Check all connections, if the control unit is damaged, replace it.
The display shows: E11 or E14| The power supply protection has tripped| Ensure that the machine is properly unfolded and placed on a flat and level surface. Check all connections, if the control unit is damaged, replace it.
The equipment is unstable| The surface is not flat.| Place the machine on a flat surface. If applicable, rotate the legs underneath the front of the machine to move it up or down as necessary to make the equipment stable.

DECLARATION OF CONFORMITY

We, BESELF BRAND S.L., owner of the brand FITFIU Fitness, with registered office at c/Blanquers, 7-8 43800 – Valls, SPAIN, declare that the MC-120 treadmill, from serial number 2017 onwards, is in conformity with the requirements of the applicable European Parliament and Council Directives:

• Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast).

EN 60335-1: 2012 + A11: 2014 + A13: 2017 + A1:2019 + A14: 2019 + A2: 2019 EN 62233: 2008

IEC 60335-1:2010/COR1:2010/COR2:2010
/AMD1:2013/COR1:2014/AMD2:2016/COR1:2016

The delivered product corresponds to the EC type-examination specimen.

Valls, 25 June 2021

Mireia Calvet, CEO (Authorised representative and responsible for technical documentation).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>