EDIFIER e10BT Multimedia Speaker User Manual
- June 13, 2024
- Edifier
Table of Contents
EDIFIER e10BT Multimedia Speaker User Manual
Important safety instruction
WARNING: To reduce the risk offire or electric shock, do not expose this apparatus to ain or moisture.
Thank you or purchasing this EDIFIER product.For generations, EDIFIERties o provide powered speaker products to saisy the need of our end customers,even the most demanding ones, This product can add to your home entertainment,personal computer, and mini hore theater great sound performance: Please read this manual carefully to Obtain the best of this yster.
The lightning flash with arrowhead inside the triangle, is intended to alert the user to the presence of un insulated dangerous voltage within the product’s enclosure that may be of a sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
To prevent the risk of electric shock, do not remove cover (or back). No user- serviceable Parts inside. Refer servicing to qualified Service personnel only.
The exclamation point inside the triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the product.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
FCC Caution:
“Changes or modifications not expressly approved by the part responsible
for compliance could void the user’s authority to operate the equipment.”
FCC statement:
“This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.”
IC statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device. This Class 【B】 digital apparatus complies with Canadian ICES-003.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailerwhere the product was purchased. They can take this product for environmental safe recycling.
Unpack the Box
Box contents:
Power adapter
Speaker connecting cable
3.5mm-3.5mm audio connecting cable
illustrations
- Connect to the active speaker
- Connect to the passive speaker
- AUX input port
- Connect to the power adapter
- Volume increase
- Volume decrease
- Standby/ON
Operational guide
Power on
- Connect the power adapter to the speaker and then connect to the wall sacket.
- The indicator light on the front panel is now lit, the system s on. Press & hold the ® button for approximately 3 seconds to set the system into standby mode. Press the ® bution to tum the system back on.
Aux input
-
Connect the AUX input cable to your PC sound card, MP3 player or external audio source using the 3.5mm to 3.5mm audio connecting cable.
-
Play the selected audio on the connected device.
-
Adjust the volume to the desired level
-
Set your device (mobile phone, tablet device, MP3/MP4 player etc.) to search and select
“EDIFIER Exclaim Connect”. -
Pair your device with “EDIFIER Exclaim Connect”.
-
Play the audio on your device and adjust the volume to a desired level swn
-
To disconnect Bluetooth: Press once.
Note:
- Bluetooth connectivity and compatibility may be different between different source devices, depending on the software versions of source devices.
- “To enjoy the full Bluetooth functions of this product, please ensure your mobile device has A2DP. profile.
- PIN code for connection is “0000 if needed.
Specifications
Power output: RMS 8W x 2 + 10W x 2 (DRC on)
Frequency response: >850BA
Signal to noise ratio: 60Hz-20KHz (+6dB)
Input type: Bluetooth, AUX
Input sensitivity: R/L: 700 mV + 50mV
Bass unit: 3 inch (82mm)
Treble unit: 1½ inch (40mm)
Troubleshootin
- Switch the EDIFIER e10BT off then on and reconnect to the audio source.
- Ensure Bluetooth function is enabled compatible on your Bluetooth devices.
- Move the devices closer and retry the connection.
- Try another Bluetooth device for connection.
- Please check if power is connected, and if the wall outlet is switched on.
- Please Switch the system off then on and reconnect to the audio source.
- Please check if the system is in STBY.
- Please check if the master volume is turned to minimum.
- Please check if the audio input cable is connected correctly.
- Please check if there is signal from audio source
If you have any further questions or concerns regarding EDIFIER Products… Asia, Europe, Oceania:
Please visit our website at : www.edifier-international.com or email EDIFIER Support for further assistance
at: enquiry@edifier.com,
→ Dear Customer, thank you for purchasing this EDIFIER product. For the
EDIFIER warranty applicable for this produ we refer you to the EDIFIER
website
www.edifier-international.com/warranty-terms.
Canada/USA/Mexico: www.edifier.ca, Email:
service@edifier.ca
If you prefer, you may contact us by phone, Toll Free: 1-877-EDIFIER
(334-3437) in Canada, 1-800-688-7406
South America: Please visit www.edifier.com
(English) or www.edifierla.com
(Spanish/Portuguese) for detailed in US. local contact information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>