Apple TK78669U0C CarPlay Box Instruction Manual

Apple TK78669U0C CarPlay Box

Product Information

The Apple CarPlay feature allows users to conveniently make calls, send or receive messages, listen to music, and search for destinations using their iPhone with the Mazda Connect. The feature also supports voice recognition using Siri.

It is important to note that there are certain warnings and cautions associated with the product usage

• WARNING: The USB cord should not be allowed to get tangled in the selector lever/shift lever as it can be a distraction while driving and may lead to unexpected accidents.
• CAUTION: Items should not be placed on or force applied to the USB port or console box lid when the plug is connected. Noise may occur when using the mobile device with the accessory power socket, so it is advised not to use it in such cases. Additionally, iPhones should not be left in the cabin under direct sunlight as it may cause damage due to high temperatures.
• NOTE: Before using the product, it is recommended to carefully read the user instructions for the iPhone. The Mazda Connect should not be used for a long time with the engine stopped to prevent depletion of battery power. The Apple-genuine connector cord should be securely inserted into the USB port.

Product Usage Instructions

1. Turn on Bluetooth on your phone and search for the name of Carplay Box.
2. Open the mobile phone’s Wi-Fi settings and connect it to Carplay Box.
3. To connect an iPhone, insert an Apple-genuine connector cord into the USB port and connect the iPhone. Insert or pull out the plug with the plug perpendicular to the USB port.
   • Always Enable: Enables Apple CarPlay each time without a confirmation.
   • Never Enable: Disables the currently connected device from using Apple CarPlay in the future.
   • Enable Once: Enables the device to use Apple CarPlay only this time.
   • Cancel: Disables the device from using Apple CarPlay this time. When connecting Apple CarPlay for the first time, a confirmation screen regarding Apple CarPlay activation will be displayed. Choose one of the following options
   • Note: If “Enable Once” is selected, the confirmation screen will be displayed again the next time the engine is started, unless the interval between stopping and starting the engine is short.
4. To display the Apple CarPlay screen, either press and hold the Home button or slide the [slider icon] to the right while “is displayed on the Mazda Connect home screen.
5. To access the Apple CarPlay home screen, press the [commander switch] or hold the Home button while any Apple CarPlay screen is displayed.
6. Rotate or slide the [icon selector] to select the desired application icon.
7. Press the [select button] to activate the application associated with the selected icon.

Note: The icons displayed on the Apple CarPlay home screen and their positions may vary depending on the connected iPhone, iOS version, or market.

The product also provides access to various CarPlay applications, which can be activated and used individually. Refer to the help information available with each application for specific usage instructions.

Apple CarPlay

Apple CarPlay allows you to make calls, send or receive messages, and listen to music using your iPhone with the Mazda Connect, or search for destinations using the maps. In addition, voice recognition using Siri is available.

WARNING
Do not allow the cord connected to the USB port to get tangled in the selector lever/shift lever.
If the cord gets tangled, it could be a distraction to your driving and result in an unexpected accident.

CAUTION

• Do not place items or apply force to the USB port or console box lid with the plug connected.
• Depending on the mobile device to be connected, noise may occur when using the device with it connected to the accessory power socket equipped on the vehicle (if noise occurs, do not use the accessory power socket).
• Do not leave your iPhone in the cabin. Otherwise, the cabin temperature will increase to a high temperature under direct sunlight which could cause damage.

NOTE

• Before use, carefully read the user instructions for the iPhone.
• Do not use the Mazda Connect for a long time with the engine stopped. Otherwise, the battery power could be depleted.
• Insert the Apple-genuine connector cord into the USB port securely.

1. Turn on Bluetooth on your phone and search for the name of Carplay Box****
2. Open the mobile phone’s WiFi and connect it Carplay Box****

Connecting an iPhone
Insert an Apple-genuine connector cord into the USB port and connect the iPhone. Insert or pull out the plug with the plug perpendicular to the USB port.

1. Located on centre console
2. Located on front console

The location of the USB port differs depending on the vehicle model.

NOTE

• When an iPhone connected to Bluetooth® is connected to the vehicle’s USB port, the system switches to Apple CarPlay. Applications that you were using when connected to Bluetooth® can continue to be used. However,the functions that can be used with a Bluetooth® connection and the functions which can be used by Apple CarPlay differ depending on the application.

Connecting Apple CarPlay for the first time
When connecting Apple CarPlay for the first time, a confirmation screen concerning Apple CarPlay activation is displayed.

• Always Enable: Enables Apple CarPlay each time without a confirmation.
• Never Enable : Disables the currently connected device hereafter.
• Enable Once : Enables the device only this time.
• Cancel: Disables the device this time.

NOTE
If you select “Enable Once”, the confirmation screen is displayed again the next time the engine is started.
However, if the interval between stopping and starting the engine is short, the confirmation screen may not be displayed.

Displaying the Apple CarPlay screen

is displayed on the Mazda Connect home screen while Apple CarPlay is connected or press and hold the Home button.
Slide the to the right while is displayed to display the Apple CarPlay  screen or press and hold the Home button.

Apple CarPlay home screen
You can display the Apple CarPlay home screen by pressing the on the commander switch while any Apple CarPlay screen is displayed or press and hold the Home button.

Rotate the or slide it to select the icon you want to operate.
Press the to activate the application of the selected icon.

NOTE

The icon displayed on the Apple CarPlay home screen and the display position of the icons may differ depending on the connected iPhone and iOS version or market.

Refer to the help information available with each application for the method of using each application.
2| | Displays the Apple CarPlay Home screen. Select and hold to activate Siri.
| |

Convenient Ways to Use Apple CarPlay

CarPlay using voice by activating Siri using one of the following methods.

• Press the   on the audio remote control switch.
• Press and hold .

To display the Now Playing screen| While music is playing using Apple CarPlay, press the  on the commander switch to return to the Apple CarPlay playback screen.
**** To display the MAP screen| During route guidance using Apple CarPlay, press the  on the commander switch to return to the Apple CarPlay map screen.

1. The voice recognition function of Mazda Connect cannot be used while Apple  CarPlay is connected.

Ending Apple CarPlay
To end Apple CarPlay mode, disconnect the connector cord from the USB port or disconnect the iPhone from the connector cord.
The screen displayed before Apple CarPlay was activated is displayed. In addition, the Bluetooth® device connected prior to the Apple CarPlay activation is reconnected.

Android Auto™
Android Auto™ is an application which allows the operation of an Android™ Smartphone using the Mazda Connect. Available contents such as the phone, messages, music, and maps that are compatible with Android Auto™ can be used with the Mazda Connect.

WARNING
Do not allow the cord connected to the USB port to get tangled in the selector lever/shift lever.
If the cord gets tangled, it could be a distraction to your driving and result in an unexpected accident.

CAUTION

• Do not place items or apply force to the USB port or console box lid with the plug connected.
• Depending on the mobile device to be connected, noise may occur when using the device with it connected to the accessory power socket equipped on the vehicle (if noise occurs, do not use the accessory power socket).
• Do not leave your Android™ Smartphone in the cabin. Otherwise, the cabin temperature will increase to a high temperature under direct sunlight which could cause damage.

NOTE

• Before you use Android Auto™ with your vehicle, you need to download the Android Auto™ application from the Google Play™ on your Android™ Smartphone.
• Before use, carefully read the user instructions for the Android™ Smartphone.
• Do not use the Mazda Connect for a long time with the engine stopped. Otherwise, the battery power could be depleted.
• Insert the Android™ Smartphone genuine connector cord into the USB port securely.

Connecting an Android™ Smartphone
Insert an Android™ Smartphone-genuine connector cord into the USB port to connect the Android™ Smartphone. Insert or pull out the plug with the plug perpendicular to the USB port.

1. Located on centre console
2. Located on front console

The location of the USB port differs depending on the vehicle model.

NOTE

• To use Android Auto™, you need to enable Bluetooth®.
• The parking brake must be engaged when connecting the Android Auto™ device for the first time.
• Android™ Smartphones can be connected to Android Auto™.

Up to 5 Android™ Smartphones can be registered.

• When setting the Device Connection Status of a connected Android™ Smartphone to “Never Enabled”, Android Auto™ will not activate even if your Android™ Smartphone is connected to the vehicle’s USB port. When you want to use Android Auto™, change the setting.

Connecting Android Auto™ for the first time
When connecting Android Auto™ for the first time, a confirmation screen concerning the Android Auto™ activation is displayed.

• Always Enable: Enables Android Auto™ each time without a confirmation.
• Never Enable : Disables the currently connected device hereafter.
• Enable Once: Enables the device only this time.
• Cancel: Disables the device this time.

NOTE
If you select “Enable Once”, the confirmation screen is displayed again the next time the engine is started.
However, if the interval between stopping and starting the engine is short, the confirmation screen may not be displayed.

Displaying the Android Auto™ screen is displayed on the Mazda Connect home screen while Android Auto™ is connected.
Slide the to the right while is displayed to display the Android Auto™ screen or press and hold the Home button to display Android Auto™.

Android Auto™ home screen
You can display the Android Auto™ home screen by pressing the on the commander switch while any Android Auto™ screen is displayed.
To move from the Mazda Connect screen to the Android Auto™ screen, press and hold the on the commander switch.

Rotate the or slide it to select the item or icon.
Press the to activate the application of a selected item or icon.

NOTE

• The media displayed on the Android Auto™ home screen may differ depending on the use conditions and version of the connected Android™ Smartphone.

differ depending on the application that has been activated and its sta- tus.
2| | Activates the map application.
3| | Activates the call function.
4| | Displays the Android Auto™ home screen.
5| | Activates the music application.
6| | Displays other menus.
You can return to the Mazda Connect screen from the menu.

Convenient ways to use Android Auto™

start voice recognition mode and operate Android Auto™ using voice.

• Slide the to the right an select the
• Press the  on the audio remote control switch.

To display the Now Playing screen| While music is playing using Android
Auto™, press the  on the commander switch to return to the Android Auto™ playback screen.
**** To display the MAP screen| During route guidance using Android Auto™, press the  on the commander switch to return to the Android Auto™ map screen.
To return to the Mazda Connect screen| Press and hold  on the commander switch.

1. The voice recognition function of Mazda Connect cannot be used while Android  Auto™ is connected.

Ending Android Auto™
To end Android Auto™, disconnect the connector cord from the USB port or disconnect the Android™ Smartphone from the connector cord.

FCC Warning Statement
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located for operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>