Ozito 18V Lithium ION 4.0Ah BATTERY Instruction Manual
- June 7, 2024
- ozito
Table of Contents
18V Lithium ION 4.0Ah BATTERY
Instruction Manual
SPECIFICATIONS
| Input: | 18V |
|---|---|
| Battery Capacity: | 4.0Ah Li-ion |
| Power Consumption: | 72Wh |
| Weight: | 0.65kg |
- Battery
- Battery Release Button
- Charge Indicator Button
PXBP-40B
DESCRIPTION OF SYMBOLS
| V | Volts | Hz | Hertz |
|---|---|---|---|
| ac/~ | Alternating Current | W | Watts |
| dc | Direct Current | Ah | Amp Hour |
| mA | Milliamperes |
| Warning
| Lithium-Ion Battery|
| Do not store or use battery in temperatures exceeding 50°C
| Recycle Battery|
| Do not put in the rubbish
| Do not incinerate|
| Do not get battery wet
****
| Regulatory Compliance Mark (RCM)|
| Do not store battery when the charge is low; store between 40-60%.
| Read Instruction Manual|
| Do not expose to rain.
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfills and raw materials. The reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice.
BATTERY SAFETY WARNINGS
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR BATTERY.
-
Before charging the Power X Change battery, read all instructions and cautionary markings on the charger, battery pack, and the product using the battery pack.
-
DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 50°C (such as inside sheds or metal buildings in summer).
-
The battery pack is not fully charged out of the carton. First, read the safety instructions and then follow the charging notes and procedures.
-
The longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 18-24°C. Do not charge the battery pack in air temperatures below 0°C or above 50°C. This is important and will prevent damage to the battery pack.
-
Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The battery can explode in a fire.
-
Never attempt to open or dismantle the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks immediately discontinue use and do not recharge.
-
During charging, the battery must be placed in a well-ventilated area.
-
Keep the battery pack out of reach of children.
-
Do not expose the battery pack to heat or fire. Avoid storage in direct sunlight.
1 -
Do not short-circuit the battery pack. Do not store battery packs haphazardly in a box or drawer where they may short circuit each other or be short-circuited by other metal objects.
-
Do not subject the battery pack to mechanical shock (sudden impacts).
-
In the event of a cell leaking, do not allow the liquid to contact the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
-
Do not use any charger other than that specifically provided for use with the battery pack.
-
Do not use the battery pack with the equipment it is not designed for.
-
Always keep the battery pack clean and dry.
-
Do not use or charge the battery in wet weather conditions. Do not submerge the battery in water.
-
Wipe the battery terminals with a clean dry cloth if they become dirty.
-
Do not leave a battery on prolonged charge when not in use.
-
After an extended period of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.
-
Retain the manuals for future reference.
-
When possible, remove the battery pack from the equipment when not in use.
-
Do not store batteries near flammable substances.
ELECTRICAL SAFETY
WARNING! When using mains-powered tools, basic safety precautions,
including the following, should always be followed to reduce the risk of fire,
electric shock, personal injury, and material damage.
Read the whole manual carefully and make sure you know how to switch the tool
off in an emergency, before operating the tool.
Save these instructions and other documents supplied with this tool for future
reference. Note: The supply of 230V and 240V on Ozito tools are
interchangeable for Australia and New Zealand.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid a hazard.
Note: Double insulation does not take the place of normal safety precautions
when operating this tool. The insulation system is for added protection
against injury resulting from a possible electrical insulation failure within
the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this
tool. Before use, inspect the extension lead for signs of damage, wear, and
aging. Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use
of an extension lead not suitable for the power input of the tool or which is
damaged or defective may result in a risk of fire and electric shock.
To reduce the risk of electric shock, we recommend the use of a residual
current device (rated 30mA or less).
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
OPERATION
Only use the battery pack with Ozito Power X Change 18V cordless products.
CHARGING YOUR LITHIUM-ION BATTERY
This battery has been shipped in a low charge condition and requires charging
prior to use. Allow several cycles of charging and discharging (through use
with a compatible
tool) for the battery to reach its optimum performance/runtime.
This battery is compatible with chargers from the 18V Ozito Power X Change
range available through your local Bunnings Warehouse. Product availability
may differ.
1. Insert the power plug of the charger into the mains socket outlet. The
green LED will begin to flash when properly connected to the power supply.
2. Insert the battery pack into the battery charger.
3. Remove the battery from the charger once fully charged. Disconnect the
charger from the power supply.
Note: The battery pack can become a little warm during the charging. This
is normal.
If the battery pack fails to charge, check:
if there is the voltage at the socket-outlet
that the battery and charger are properly connected
If the battery pack still fails to charge, please contact our customer service center.
BATTERY CHARGE INDICATOR
The purchased battery is equipped with a battery charge indicator to show the
state of the battery charge.
Press the charge indicator button and look to see which LED lights.
| Battery requires immediate charging
---|---
| Low state of charge, requires charging soon.
| Mid state of charge
| Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
BATTERY PROTECTION SYSTEM
The tool is equipped with a battery protection system, which helps to ensure
the longevity of the battery.
The output power automatically cuts off during operation when the tool and/or
battery are placed under the following situations:
-
When the tool is overloaded:
If this occurs, release the trigger switch and remove causes of overload, then pull the switch trigger again to restart. -
When the remaining battery capacity becomes low:
Recharge the battery pack.
Note: The battery protection system does not in any way damage the tool.
Note: The indicated capacity may be lower than the actual level during
use or immediately after using the tool.
WARRANTY
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER
ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded by law. You are
entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Generally, you will be responsible for all costs associated with a claim under
his warranty, however, where you have suffered any additional direct loss as a
result of a defective product you may be able to claim such expenses by
contacting our customer service helpline above.
36 MONTH REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents, or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
ONLINE MANUAL
Scan this QR Code with your mobile device to take you to the online manual.
https://ozito.com.au/products/PXBP-40B
OZITO Australia/New Zealand (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>