XINVO STG7080K QI2 CHARGING STATION User Manual
- July 26, 2024
- Xinvo
Table of Contents
MULTI-FUNCTION
WIRELESS CHARGER
USER MANUAL
(Q12)
Product Care
| Use original or certified cables.
---|---
| Avoid overloading device.
| Avoid exposure to liquids
| Avoid extreme temperatures.
| Do not disassemble.
How to Use
Setting Up The Multi-function Wireless Charging Station Plug the provided TYPE-C USB Cable into the charging Station TYPE-C USB port. Plug the other end into a ocal power source(Suggest to use Qc 3.0 charger). You will see the LED indicator on the charging station turn BLUE, GREEN, and then turn off. This means that it is ready for use.
Important Notes
Please Note: Improper use may result in product damage,a decrease in your
phone’s battery life,and loss of charging capacity not covered by the
manufacturer’s warranty.
Be sure to plug in the Multi-function wireless charging station before use.
Use only the provided power cable to power on the Multi-function wireless
charging station.
Don’t place your phone on the Multi-function wireless charging station while
the phone is plugged in and charging.
Don’t drop,knock,disassemble or attempt to repair theMulti-function wireless
charging station by yourself.
Keep out of reach of children.
Don’t immerse the Multi-function wireless charging station in water or make it
wet Don’t expose the Multi-function wireless charging station to a heat source
like fire or heater.
Product Specifications
Input | 9V-3A,5V-3A |
---|---|
Wireless Charging Stand | 20.5W Max |
Phone Wireless Charger | 15W Max (MPP) |
Airpods Wireless Charger | 3W Max |
Watch Wireless Charger | 2.5W Max |
Wireless Charging Distance | ≤ 8mm |
Wireless Charging Efficiency | ≥ 280% (MPP) |
Supports USB-C Apple Watch magnetic charging cable.
Supports 30W USB-C PD or QC3.0 charger
*Apple watch original USB/USB-C magnetic charging cable not included.
Output 2 and Output 3 total output 5V/1A.
Package Contents
1x Wireless Charging Station
1 x USB-C Charging Cable
1 x Manual
Kor best results,please use comparable 18W USB-C PD or QC3.0 charger.If a
conventional 5V/2A USB charger is used,the total wireless charging output is
limited to Max.10W.You may experience slow charging if you attempt to charge
multiple devices simultaneously.
Compatibility
- iPhone 8/11/11 Pro/12/12 Pro/13/13 Pro/14/14 pro/15/15Pro and more;
- Samsung Galaxy $8/S9/S10/S20/S20 FE/S21/S21 Ultra/S22/523Ultra/Fold/ Z Fold2/Z Flip3/W21/W22 /Note 20 and more;
- Huawei Mate. RS/20 Pro/30 /30 Pro/40/40 Pro/50 pro/60 Pro and more;
- Xiaomi 9/9Pro/10/10Pro/11/11Pro/12 /MIX 2 S/MIX 3 /MIX 4 and more;
- OPPO Find N/X3/X3 Pro/X4 Pro and more
- Google Nexus 4/5/6/Pixel 3/Pixel 3 XL and more
- Supports other models that are compliant with Qi wireless charging standard, such as wireless charging based smart watches,earbuds and earphones.
Trouble shooting
Apple Watch not charging.
- Apple Watch can only be charged with the official magnetic charging cable that came with the watch,it cannot be charged on any other wireless charging surface of this charger.Charging cable is not included.
Phone not charging.
- Make sure to use an 18W PD or QC3.0 adapter if charging multiple devices at once.
- The phone case or ring holder is too thick,remove it before charging.
- Rest the phone in portrait mode,not landscape mode,to align with charging coils.
Smart watch/Earbuds/Wireless device not charging.
- Make sure devices are compatible with Qi wireless charging technology.
- Make sure devices are aligned with charging coils.
Devices charging too slowly.
- Make sure to use an 18W PD or QC3.0 adapter for best charging results,especially if charging multiple devices.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, inc
luding interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residentia l installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technic ian for help.
To maintain compliance with FCC’s RF Exposure guide lines, This equipment should be insta lled and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>