RELIABILT 93560-012 Baron Matte Black Interior Bed Bath Privacy Door Instruction Manual

June 13, 2024
RELIABILT

RELIABILT 93560-012 Baron Matte Black Interior Bed Bath Privacy D

RELIABILT-93560-012-Baron-Matte-Black-Interior-Bed-Bath-Privacy-Door-
product

RELIABILT and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

Questions
Call customer service at 866-386-7941,
8:00 a.m. – 8:00 p.m., EST, Monday – Sunday.
You could also contact us at [email protected] or visit www.lowespartsplus.com.

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate, or install the product.

PREPARATION

Before beginning installation of a product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. ESTIMATED ASSEMBLY TIME: 40 – 60 MINUTES

PACKAGE CONTENTS

RELIABILT-93560-012-Baron-Matte-Black-Interior-Bed-Bath-Privacy-Door-
fig-1

TOOLS NEEDED (NOT INCLUDED)

PREPARE DOOR AND CHECK DIMENSIONS

RELIABILT-93560-012-Baron-Matte-Black-Interior-Bed-Bath-Privacy-Door-
fig-3

For drilling instructions refer to your product’s “Guides & Documents” tab on Lowes.com

INSTALL LATCH

RELIABILT-93560-012-Baron-Matte-Black-Interior-Bed-Bath-Privacy-Door-
fig-4

  • Install the latch so that the slant of bolt faces in the direction that the door closes.
  • Secure the latch with the supplied screws.

IMPORTANT
BEFORE INSTALLING KNOBS / LEVERS, ADJUST THE LATCH (IF NEEDED)
Adjustable latch Look in the door hole. If the square hole in the latch is centered in the door hole, no adjustment is required. Proceed to step 3. If the square hole is not centered, adjust the latch. See “Latch Adjustment.”

Latch Adjustment (only if needed)

RELIABILT-93560-012-Baron-Matte-Black-Interior-Bed-Bath-Privacy-Door-
fig-7Universal latch Measure the backset of the hole to determine the square spindle loading location you should use.

TEMPLATE
Fold on a dotted line and fit on the door edge.
Mark 1 in. (25.4 mm) hole at the center of the door edge.

RELIABILT-93560-012-Baron-Matte-Black-Interior-Bed-Bath-Privacy-Door-
fig-9

INSTALL KNOBS (LEVERS: SKIP TO STEP 4)

RELIABILT-93560-012-Baron-Matte-Black-Interior-Bed-Bath-Privacy-Door-
fig-10

  • Install the outside knob. Insert the spindle through the square hole in the latch.
  • Install the inside knob and tighten the screws.

INSTALL LEVERS

  • Install the outside lever. Insert the spindle through the square hole in the latch.
  • The lever handle faces away from the door edge.

OPTIONAL: LEVER FLIP

RELIABILT-93560-012-Baron-Matte-Black-Interior-Bed-Bath-Privacy-Door-
fig-11

  • Remove both lever handles from the lever bases, and swap the inside and outside lever handles.
  • Insert the lever removal tool into the hole in the side of the lever, and pull the lever handle to remove it.
  • Entry levers only: Make sure the outside lever is unlocked.RELIABILT-93560-012-Baron-Matte-Black-Interior-Bed-Bath-Privacy-Door-fig-13
  • Make sure the lever clicks into place.
  • Install the inside lever and tighten the screws.

INSTALL STRIKE

Install the strike on the door frame and tighten the screws.

RELIABILT-93560-012-Baron-Matte-Black-Interior-Bed-Bath-Privacy-Door-
fig-14

Replacement Parts List & Troubleshooting
Lista de piezas de repuesto y solución de problems For replacement parts & troubleshooting, call customer service at 866-386-7941, 8:00 a.m. – 8:00 p.m., EST, Monday – Sunday. You could also contact us at [email protected] or visit www.lowespartsplus.com.

RELIABILT-93560-012-Baron-Matte-Black-Interior-Bed-Bath-Privacy-Door-
fig-15

Limited Lifetime Warranty

The Manufacturer extends a Limited Lifetime Mechanical and Finish Warranty to the original “User” of this Product against defects in materials and workmanship as long as the User occupies the residential premises upon which the Product was originally installed. Upon return of a defective Product to the Manufacturer, the Manufacturer shall either replace, repair, or refund the purchase price in exchange for the Product. This warranty does not cover abused or misused Products or those Products used in commercial applications.

No other warranties, express or implied are made with respect to the Product including but not Manufacturer DOES NOT authorize any person to create for it any obligation or liability in connection with the Product. The Manufacturer’s maximum liability hereunder is limited to the purchase price of the Product, and in no event shall the company be liable for any consequential, indirect, incidental, or special damages of any nature arising from the sale or use of this Product, whether in contract, tort, strict liability or otherwise. (For warranty service, please call 866-386-7941, 8:00 a.m. – 8:00 p.m. EST, Monday through Sunday).

Note: Should the Product be considered a consumer product it may be covered by the Magnusson Moss Federal Warranty Act, please be advised that: (1) Some states do not allow limitations or incidental consequential damages on how long an implied warranty legal rights and a User may have other rights which may vary from state to state.

CARE AND MAINTENANCE

THE FOLLOWING CARE INSTRUCTIONS SHOULD BE FOLLOWED TO ENSURE A LONG-LASTING FINISH:

  1. Remove locks, or do not install locks, prior to painting your door.
  2. Periodically clean with mild soap and a soft cloth only. Do not use abrasives or harsh chemicals and avoid sharp objects.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

RELIABILT User Manuals

Related Manuals