GE 64655LO ConstantON 300 Count 62-ft Clear Incandescent Plug In Christmas String Lights Instruction Manual
- June 13, 2024
- GE
Table of Contents
GE 64655LO ConstantON 300 Count 62-ft Clear Incandescent Plug In
Christmas String Lights
Product Information
- Model Number: FPS-150/3F (0.51)
- Product Type: Constant-On Light String
- Capacity: 300L (2x150L)
- UL Certified: Yes
- Compatible Bulbs: 2.5 Volt, 0.425 Watt lamps
Product Usage Instructions
When using the product, it is important to follow these safety guidelines:
- To reduce the risk of fire and electric shock:
- Do not install on trees with needles, leaves, or branch coverings made of metal or metal-like materials.
- Do not mount or support strings in a way that can cut or damage wire insulation.
- To reduce the risk of overheating:
- Replace burned-out lamps promptly.
- Use only 2.5 Volt, 0.425 Watt lamps.
- Do not use the product outdoors unless it is marked suitable for outdoor use.
- Unplug the product when leaving the house, retiring for the night, or when not in use.
- Do not remove any safety devices (fuses) present in the product. Discard the product if the attachment plug is damaged.
- This product is not a toy and should not be played with or placed where small children can reach it, to avoid the risk of fire, burns, personal injury, and electric shock.
Bulb Replacement Instructions:
- Grasp the plug and remove it from the receptacle or outlet device.
- Hold the bulb by the plastic base and pull it straight out from the base. Do not twist the bulb when inserting it into the socket.
- Replace the bulb with a 2.5 Volt, 0.425 Watt super bright midget push-in type lamp provided with the product.
- Push the spare bulb/base assembly into the socket. Ensure that each bulb lead comes out of an exit opening at the bottom of the plastic base.
- Bend each lead up so that it fits closely against the narrow side of the plastic base.
Note: The first bulb (closest to the bladed plug) and the last bulb (closest to the end connector) are replaceable safety fuse lamps. These bulbs can be identified by their white (or green) lamp holder ring. It is important to read and follow all instructions provided with the product and on the product itself. Keep these instructions for future reference.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed
- READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- This seasonal use product is not intended for permanent installation or use.
- Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or on any wire.
- Unplug the product when leaving the house, when retiring for the night, or if left unattended.
- This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
- Do not use this product for other than its intended use.
- Do not hang ornaments or other objects from cord, wire, or light string.
- Do not place lighting string on carpeting, drapes, furniture, or allow it to contact vinyl siding while the power is on.
- Do not perform any maintenance or troubleshoot for bad or broken lamps while the power is on.
- Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
- Do not cover the product with cloth, paper or any material not part of the product when in use.
- This product is equipped with push-in type lamps. Do not twist lamps.
- This product employs overload protection (fuse). A blown fuse indicates an overload or short -circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product, Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded.
- Read and follow all instructions that are on the product or provided with the product.
- SAVE THESE INSTRUCTIONS
Use and Care Instructions
- When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
- If the product is placed on a tree, the tree should be well secured and stable.
- Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
- When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
- When not in use, store neatly in a cool, dry location protected from sunlight.
CAUTION:
To reduce the risk of fire and electric shock:
- Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal, and b) Do not mount or support strings in a manner that can cut or damage wire insulation.
- To reduce the risk of overheating, replace burned-out lamps promptly. Use 2.5 Volt, 0.425 Watt lamps only.
User Servicing Instructions
Fuse replacement: Before changing fuses, make sure the set is unplugged. Most
often, fuses blow because too many sets have been string end-to-end.
-
Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
-
Using a flathead screwdriver, open fuse cover. Slide open the fuse access cover on top of attachment plug towards blades.
-
Remove fuse carefully.
-
Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse (provided with product).
-
Close fuse cover. Slide closed the fuse access cover on top of attachment plug. Make sure door is closed and fuses are completely covered.
-
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.
Bulb Replacement : Before changing bulbs, make sure set is unplugged.
CAUTION: When replacing lamps. Please note the first bulb (located
closest to the bladed plug) and the last bulb (located closest to the end
connector) are REPLACEABLE safety fuse lamps. These lamps can be identified by
their white (or green) lamp holder ring. Always replace burned-out bulbs
promptly. If a number
of bulbs are burned out, extra stress is put on the remaining bulbs in the
circuit. This may cause additional bulbs to burn out prematurely.
-
Step 1: Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling cord.
-
Step 2: Hold bulb by the plastic base and pull bulb/base straight out of socket.
-
Step 3 : Replace bulb with only 2.5 Volt, 0.425 Watt super bright midget push-in type lamp provided with product. Push spare bulb/base assembly into socket. Do not twist bulb when inserting into socket. If bulbs are twisted, part of the set will not light.
If the spare bulbs provided with the product have no plastic base or the plastic base does not fit, first follow steps 1 – 2 above. Then
- Remove the old bulb by straightening the bulb wires and pulling bulb straight from the base.
- Replace the new bulb by straightening the bulb leads and aiming each wire into a separate hole in the plastic base.
- Make sure each bulb lead comes out an exit opening at the bottom of the plastic base. Now bend each lead up such that each bulb lead fits closely against the narrow side of the plastic base.
CAUTION:
This lighting string is rated 61.2Watts (0.51 Amps), do not overload. Connect
other lighting strings or decorative outfits end-to-end up to a maximum of
216Watts (1.8 Amps) total. If connecting to a lighting string that does not
have a Wattage (W) rating {found on the tag within 6 inches of the plug}
calculate the wattage as follows:
Multiply the current (0.51A) which is on the flag-type tag by 120.
For Example: Lighting string is rated 120V, 60 Hz, 0.51 Amps. 0.51 X 120 =
61.2Watts
Add the wattage of each light string together for a total of 216Watts or less.
(Do not exceed 216Watts.)
For questions and/or assistance, call customer service at
1-877-398-7337 or visit us on the web
at www.geholidaylighting.com.
FOR INDOOR AND OUTDOOR USE MADE IN PHILIPPINES
PRINTED IN PHILIPPINES E63536 HS-23
© 2023 Nicolas Holiday Limited., Suite 2706 Skyline Tower, 39 Wang Kwong Road,
Kowloon Bay,
Kowloon, Hong Kong
All rights reserved.
2-YEAR LIGHTING LIM ITED GUARANTEE
SUBJECT TO THE EX CLUSIONS BELOW
This product was pre-tested before shipment and date coded . In keeping with
the National Electrical Code, this product is intended for residential
seasonal installation and use (90 day max. per year). Nicolas Holiday Ltd.’s
2-year Limited Guarantee covers repair or replacement (same or equivalent) of
this product within two (2) years from the date of purchase. Troubleshooting
tips are on your use and care guide included in this box. If troubleshooting
is unsuccessful, se nd your product prepaid along with a legible copy of your
s ales receipt to St. Nick’s Fix, 24 6 Spring Hill Road, Unit F, Trumbull, CT
06611, Attention: Customer Service. Providing the original UPC code will help
expedite your request. W hen mailing the product back to us, please include
your name, return address, contact phone number, and e -mail ad dress. Allow
four (4) to six (6) weeks for processing. For more information, you can visit
us at www.geholidaylighting.com, or call
customer support at 1-877-398-7337.
Current operating hours can be found on our website.
E XCLUSIONS
Th is product is guaranteed only if it is used as intended. All accessories
that may be packed with this product, such as clips and stakes, are guaranteed
for the first season only. This Limited Guarantee does not cover: 1)
commercial applications, 2) burned out bulbs/LEDs, 3) misuse or tampering, 4)
batteries, 5) damage caused by improper consumer handling, or 6) components
that may weather, age or discolor due to a chemical reaction when exposed to
UV, oils, heat, acid rain, atmospheric oxygen and some salts.
ANY IMPLIED GUARANTEES, INCLUDING WITHOUT LIMITA TION THE IMPLIED GUARANTEES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LI MITED TO
THE DURATION OF THIS LIMITED GUARANTEE. OTHERWISE THE REPAIR OR REPLACEMENT,
AS PROVIDE D UNDER THIS LIMITED GUARANTEE, IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER GUARANTEES, EXPRESS OR IMPLIED.
IN NO EVENT SHALL NICOLAS HOLIDAY LTD. BE LIABLE, WHETHE R IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE P
RODUCT, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OF
ANY KIND, ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE PRODUCT TO THE
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or exclusion of
incidental or consequential damages, or limitation on the length of an implied
guarantee, so the above limitations or exclusions may not apply to you. This
Limited Guarantee gives you specific legal rights, and you may also have other
rights that vary from state to state or from one jurisdiction to another.
GE is a trademark of General Electric Company and is under license by Nicolas
Holiday Limite d © 2023 Nicolas Holiday Ltd.
References
- TotalEnergies Global Homepage - Renewables and Electricity, Natural Gas and Green Gases, Oil and Biofuels | TotalEnergies.com
- The home for holiday lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>