MODSTER Flash XL 2100MM Electric Motor Glider Model In Hotliner Style User Manual

June 13, 2024
MODSTER

MODSTER Flash XL 2100MM Electric Motor Glider Model In Hotliner Style

MODSTER-Flash-XL-2100MM-Electric-Motor-Glider-Model-In-Hotliner-Style-
PRO

Statement

  1. Please read this manual carefully and follow the instructions of the manual before you use this product;
  2. 0ur airplane is not a toy, which is only suitable for the experienced manipulator or under the guidance of the experienced pilot.
  3. Not recommended for children under 14 years old.
  4. Please adjust this plane according to the instructions and make sure that the finger and other parts of your body be out of the rotating parts of the plane, or it may cause damage to the plane or injury to your body.
  5. Do not fly in thunderstorms, strong wind or bad weather.
  6. Never fly a plane where there are power lines overhead, automobiles, near airdrome, railway or highway.
  7. Never fly our plane where there are crowds of people. Give yourself plenty of room to fly, as the plane can fly at a high speed. Remember that you are responsible for others’ safety.
  8. Do not attempt to catch the plane when you are flying it.
  9. The user should bear full responsibility of proper operation and usage with regard to this model. We, MODSTER together with any distributor of us will not be responsible for any liability or loss due to improper operation.

Brief Introduction

Thanks for your purchasing our Flash XL 2100 aircraft from MODSTER, hope this aircraft will bring endless joy to you.

  • Flash XL 2100 is very easy to assemble in several minutes and the wings are removable, very easy to carry and maintain.
  • Embedded carbon spars and strips in the fuselage and wings, makes the Flash XL 2100 with high strength and make sure of the plane won’t be twisted during high-speed flights.
  • Configured with left wing, right-wing and middle wing, Flash XL 2100 can be easily switched to the smaller size Flash1500 if you take out the middle wing, one model you buy it but enjoy two different flight experiences.
  • With 10 inch foldable propeller, makes the flight with a high efficiency and protects it from the damage of the landing.
  • Very nice appearances with good proportions, impressing people with a very good visual impact.
  • Very stable flight and flexible performances, easy to control, can realize the roll and high-speed flights.
  • Full-moving tail, very easy to control.
  • With perfect design of the heat dissipation holes on the body, the motor, ESC and battery could be cooled fully during high-speed flying, which makes our flight very safe.
  • Under the protection of landing skid and spoilers, Flash XL 2100 can land from the ground without any damages for the foam parts.
  • Unique hidden pushrod design (elevator & rudder pushrods are hidden in the foams) makes the model simpler and nice.

Main Specifications

  • Wingspan: 2100mm
  • Length: 1016mm
  • Weight: 1320g
  • Thrust: ≥915g
  • Flight time: ≥15min

Main configuration

  • Motor: C2415-1150KV
  • ESC: 40A
  • Servo: 9g (plastic gear)3+9g (metal gear)1
  • R/C System: 2.4GHz 4Ch /optional
  • Battery: 3S LiPo 11.1V 2200mAh >25C (recommended)

Product Constitution

PNP version
Fuselage, Main wings, Horizontal wing, Connecting Rod for Horizontal Wings, Connecting rod for Main Wings, accessories bag Kit with Servos, ESC, Motor, Propeller.MODSTER-Flash-XL-2100MM-Electric-Motor-Glider-Model-In-Hotliner-
Style- \(1\)

Assemble processes

  1. Please take out the left, right and middle wing, wing connecting rod, and accessory bag. Insert the connecting rod to the middle wing, then connect the left and right wings to the middle wing. Connect the female plug from the middle wing to the servo cables, then fix the wings with nylon screws.MODSTER-Flash-XL-2100MM-Electric-Motor-Glider-Model-In-Hotliner-Style- \(2\)
  2. Please take out the fuselage and horizontal wing, short wing connecting rod. Insert the short wing connecting rod into the assembly holes from the rudder, then make the connecting rod insert into the left and right horizontals wings. Fix the wings with screw.MODSTER-Flash-XL-2100MM-Electric-Motor-Glider-Model-In-Hotliner-Style- \(3\)
  3. Put the assembled main wings to the right position on the top of the fuselage, fix well the wings with screws to the fuselage.MODSTER-Flash-XL-2100MM-Electric-Motor-Glider-Model-In-Hotliner-Style- \(4\)
  4. Close the canopy, then the assembly finished.

Adjustment steps
Check the center of gravity and make sure that the CG of the plane should be within the range as indicated by the arrows.MODSTER-Flash-XL-2100MM-
Electric-Motor-Glider-Model-In-Hotliner-Style- \(6\)

Safety precautions

  1. If you have the simulator, we suggest that you can practise your skill by the simulator before you fly this model, which will bring some help for you.
  2. Please climb the plane above the 50 meters with half throttle to fly it when you fly it for your first time, then you will be familiar with the performance of this plane.
  3. You should learn how to control this model blandly, it will reduce the possibility of crash and prolong the usage life of the plane.
  4. The turn radius should not be too little, or it will stall and it will increase the possibility of crash.
  5. When taking off or landing the plane, you should against the wind.
  6. Do not fly the model over your head or behind you, you should fly the model in front of you.
  7. Please check all fitments, screws for tighter fit before each flight. Also check and control surfaces, control rods and your RC equipment for proper function.

Notice: How to charge a lithium battery?

  1. While charging is in process, please do not make it near flammable materials.
  2. Use only adequate and specific chargers for charging lithium batteries correctly.
  3. While charging, please keep it out of the reach of Children.
  4. When the charger is in use, please do not go away and leave it unwatched, if any abnormality occurs (such as the power indicator is off, the temperature of the battery rise rapidly, etc.) stop charging immediately.
  5. Please do not disassemble the plane, the charger or its accessories.
  6. When the battery is not cool down, please do not urge to charge it.
  7. Do not charge unobserved.
  8. Do not charge or store the battery inside the plane.

Safety Instruction of Li-Po/Ni-MH battery

  1. Do not disassemble or reconstruct the battery.
  2. Do not short-circuit the battery.
  3. Do not use or leave the battery nearby the fire, stove or heated place (more than 26°C).
  4. Do not immerse the battery in water or seawater, do not get it wet.
  5. Do not charge the battery under the blazing sunlight.
  6. Do not drive a nail into the battery, strike it by hammer or tread it.
  7. Do not impact or toss the battery.
  8. Do not use the battery with conspicuous damage or deformation.
  9. Do not charge a warm battery. Allow it to cool completely before attempting to charge.
  10. Do not reverse charge or over-discharge the battery.
  11. Do not connect the battery to the ordinary charger socket or car cigarette jack.
  12. Do not use the battery for unspecified equipment.
  13. Do not touch the leaking battery directly, please wash your skin or clothes with water if they are bedewed by liguid leaking from the battery.
  14. Do not mix the Li-Poly battery with other un-chargeable battery in using.
  15. Do not continue charging the battery over the prescribed time.
  16. Do not put the battery into the microwave oven or high-pressure container.
  17. Do not use the abnormal battery.
  18. Do not use or keep the battery under the sunlight.
  19. Do not use the battery nearby the place that generates static electricity (over 64V).
  20. Do not charge the battery when the environmental temperature is under 0°C or over 45°C.
  21. If you find the battery leaking, smelling or abnormal, stop using it and return it to the seller.
  22. When the battery is charging, please do not make it near the flammable materials!
  23. Keep the battery away from the children.
  24. Use the specified charger and observe charging requirement (under 1A).
  25. When using by minors, parents should show them to the correct instructions.
  26. Do not charge unobserved.
  27. Do not charge or store the battery inside the plane.

Troubleshooting

MODSTER-Flash-XL-2100MM-Electric-Motor-Glider-Model-In-Hotliner-Style-
\(7\) MODSTER-Flash-
XL-2100MM-Electric-Motor-Glider-Model-In-Hotliner-Style-
\(8\)

Strict ground inspections must be done before each flight, which can effectively avoid flight accidents.

  1. Check if the screws of the whole airplane are installed in place or not, the servo arms and horns are connected reliable or not and wings fixing are locked or not.
  2. Install the battery and adjust the aircraft’s center of gravity to the recommended position in the manual.
  3. Make sure power battery, remote control transmitter battery, etc. are fully charged and in a reliable working condition.
  4. Gently push the throttle to check if the propeller is turning correctly or not.
  5. After all checks are completed, the flight can be started. The first flight for beginners needs the assistance of experienced enthusiasts to avoid flight accidents due to improper operation.

Spare part for Flash XL

MODSTER-Flash-XL-2100MM-Electric-Motor-Glider-Model-In-Hotliner-Style-
\(9\) MODSTER-Flash-
XL-2100MM-Electric-Motor-Glider-Model-In-Hotliner-Style-
\(10\) MODSTER-Flash-
XL-2100MM-Electric-Motor-Glider-Model-In-Hotliner-Style-
\(11\)MODSTER-Flash-
XL-2100MM-Electric-Motor-Glider-Model-In-Hotliner-Style-
\(12\)

FIRMENBUCH GRAZ FN315230Z • UD-NR. ATU 64361513
EVA-PARTNERNUMMER: 152216
ARA LIZENZNUMMER: 17749 • GRS NUMMER: 110072576
INTERSEROH HERSTELLER ID (EAR): 152204
WEE REG.-NR. DE 44576630

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals