Jumbo VP993596 Walkie Talkie Colorat Instructions
- June 13, 2024
- JUMBO
Table of Contents
Jumbo VP993596 Walkie Talkie Colorant
Product Information
- Item No.: VP993596
- Designer: XH
- Date: 202110
- Max Output Power: 16.13dBm = 41mW
- Frequency: 462MHz
Product Usage Instructions
- Open Battery Compartment: Locate and open the battery compartment (refer to Figure 5).
- Insert Battery: Insert one 9-volt battery into the compartment. Make sure it is properly aligned.
- Close Battery Compartment: Firmly replace the battery compartment door.
- Turn ON/OFF Switch: Locate the ON/OFF switch (refer to Figure 2) and turn it to the ON position.
- Transmitting: Press the PUSH-TO-TALK button (refer to Figure 3) to transmit. Speak into the speaker/microphone grill (refer to Figure 4) with a normal voice level.
- Receiving: Release the PUSH-TO-TALK button (refer to Figure 3) to receive audio.
- Antenna Position: For optimal transmission and reception, hold the FLEXIBLE ANTENNA (refer to Figure 1) in a vertical position.
Instructions
HOW TO OPERATE
- Open the BATTERY COMPARTMENT(Fig.5) and snap in a 9-volt battery in each walkie-talkie, replace the door firmly.
- Turn the “ON/OFF” switch(Fig.2) to “ON”.
- Press the ” PUSH-TO-TALK” button(Fig. 3) for transmitting, and speak in a normal voice level into the speaker/microphone grille(Fig. 4)
- Release the “PUSH-TO-TALK” button(Fig.3) for receiving.
- Best transmission and reception are obtained when the FLEXIBLE ANTENNA(Fig. 1) is held in a vertical position.
- Item No.: VP993596
- MAX OUTPUT POWER: 16.13dbm = 41mW
- FREQUENCY: 462MHZ
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>