MaZDa CX-5 FWD Upper Panel Removal Installation Guide
- June 4, 2024
- MAZDA
Table of Contents
MaZDa CX-5 FWD Upper Panel Removal
Removal Installation
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0,SKYACTIV-G 2.5].)
- Open the console lid.
- Move the upper panel in the order of arrows (1), (2), and (3) shown in the figure, and detach clips A and B, and the hooks.
-
Disconnect the commander switch connector. (With center display)
-
Disconnect the electric parking brake (EPB) switch connector.
-
Remove screws.
-
Remove hooks from the upper panel.
-
Remove the panel from the upper panel.
-
Remove the commander switch when replacing the panel. (With center display) (See REMOVAL/INSTALLATION .)
-
Remove the electric parking brake (EPB) switch when replacing the panel. (With center display) (See BRAKE SWITCH REMOVAL/INSTALLATION .)
-
Install in the reverse order of removal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>