SANGEAN HDR-19 FM Premium Wooden Cabinet Radio User Guide
- June 13, 2024
- Sangean
Table of Contents
HDR-19
HDR-19 FM Premium Wooden Cabinet Radio
For full documentation on all of the I-IDR-19’s functionality, please visit
the website below or scan the OR code to download the full manual.
https://us.sangean.com
https://us.sangean.com/en/product/hdr-19-natural-cherry
For Canada:
Cautions to the user
The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
RF exposure statements
To comply with the IC RF exposure compliance requirements, the antenna (s)
used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be colocated or operating in
conjunction with any other antenna or transmitter. No change to the antenna or
the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user’s authority
to operate the device.
This device complies with Industry Canada licenceexempt RSS standard (s).
Operation is subject to the following two conditions: (1) this device may not
cause interference. and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Quick Start Guide
HD Radio Technology manufactured under license from iBiquity Digital
Corporation. U.S. and Foreign Patents. For patents see
http://dts.com/patents. HD Radio and the FID. HD Radio. and “ARC” logos are
registered trademarks or trademarks of iBiquity Digital Corporation in the
United States and/or other countries.
The Bluetooth®` word mark and logos are registered trademarks owned by
Bluetooth SIG. Inc. and any use of such marks by SANGEAN ELECTRONICS INC. is
under license.
Important safety Instructions
For United States:
Cautions to the user
The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
RF exposure statements
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements. the antenna(s)
used for this transmitter must be installed to provide a separation distance
of at least 20cm (8 inches) from all persons and must not be colocated or
operating in conjunction with any other antenna or transmitter. No change to
the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements and
void user’s authority to operate the device.
Note:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device. pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates. uses and
can radiate radio frequency energy and. if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. However, there is no guaranty that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception. which can be determined by
turning the equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION: These servicing instructions are for use by qualified service
personnel only. To reduce the risk of the electric shock. do not perform any
servicing other than that contained in the operating instructions unless you
are qualified to so.
VERY IMPORTANT PLEASE READ
Sangean suggest that you keep your AC Adapter at least 12 inches away from the
radio while listening to the AM Band.
Your Sangean Radio is powered by an AC adapter which is a “switching’ or
‘switch-mode” type. The DOE (Department Of Energy) has a Federal mandate:
requiring all manufactures to use this type of power supply. This newer power
saving technology has the unfortunate side effect of causing interference to
the AM radio band.
Therefore. we recommend that customers keep at least a 1 foot distance between
the AC adapter and the radio. This interference will not affect the FM Band.
If you have any questions please contact customer service at (562)941-9900 or
servireei@sanneanliss.com.
If an AC adapter isn’t included in this model and if you wish to purchase an
AC Adapter separately. please refer to the specifications for the AC Adapter
stated on the final page of the manual, or please contact Sangean for the
correct AC Adapter and specifications.
To learn more about the DOE mandate please visit
http://www1.eere.energy.gov/buildings/appliance_standards/product.aspx/productid/23
Please note not all AC adapters are alike. The AC adapter that is included
with this radio is designed to be used exclusively with this device. Do not
use an AC adapter that differs from the specifications on the AC adapter that
is included.
If an AC adapter is NOT included with your radio and in order not to damage
the unit and void your warranty, specifications for the AC Adapter are stated
on the final page of the manual, or please contact Sangean for the correct AC
Adapter and specifications. For customers in the US and Canada, please call
562-941-9900. For all other areas,
please contact us via contact@sangean.com.
Do not use an AC adapter that does not meet the correct specifications.
Cautions
Do not allow this radio to be exposed to water, steam or sand. Do not leave your radio where excessive heat could cause damage such as in a parked car where the heat from the sun can build up even though the outside temperature may not seem too high.
- Your radio should not be exposed to dripping or splashing water and that no objects filled with liquids, such as vases, shall be placed on the radio.
- It is recommended to operate the product such that there is a minimum distance (4″ recommended) to adjacent objects in order to ensure good ventilation.
- The ventilation of the product should not be restricted by covering it or its ventilation openings with items such as newspapers, tablecloths, curtains etc.
- No open flame sources such as lighted candles should be placed on the product.
- It is recommended to avoid using or storing the product at extreme temperatures. Avoid leaving the unit in cars, on window sills or in direct sunlight etc.
Connecting and powering on the radio
The HDR-19 can be powered using the supplied AC power adapter. Connect the power adapter to the radio’s DC IN socket at the back of the radio and then plug it into a wall socket supplying 100-240 Vac, 50/60 Hz. When “Set Time” is shown on display with the hour digits flashing, it indicates that the time is not yet set. Your radio will prompt you to configure the time and date by rotating the Tuning
button to select the hour. Then push in and release the Tuning button to
confirm your selection. Please repeat these steps to complete the time and
date setup. After configuring the time and date, the radio will return to the
Standby mode and it can be powered on by pressing the Power/ Sleep button.
Note:
The instructions in this Quick Start Guide all use the controls on the radio
itself. All functions can also be controlled using the corresponding buttons
on the remote control.
Listening to AM / FM radio
- Turn on the radio by pressing and releasing the Power/ Sleep button.
- Repeatedly press and release the Mode button to select the AM or FM radio mode.
- You can select stations by rotating the Tuning button clockwise or counterclockwise or you can push in and release the Tuning button to automatically scan for the next station with a higher or lower frequency respectively. Press the HD Seek button to automatically scan for the next HD RadioTM station with a higher frequency, or press and hold the HD Seek button for 2-3 seconds then release to automatically scan for the next HD RadioTM station with a lower frequency.
- Rotate the Tuning button clockwise or counterclockwise in order to fine-tune the frequency, if needed.
- Rotate the Volume button to increase or decrease the volume as needed.
- Storing a preset: After tuning into a station, press and hold the Preset/Bluetooth pairing button for 2-3 seconds then release or until a beep is heard. The radio’s LCD will display shows “Preset Store”, rotate the Tuning button to select the desired preset number and press the Tuning button to confirm your choice. Recalling a preset: To recall a preset simply press and release the Preset / Bluetooth pairing button and then select the desired preset station by rotating the Tuning button. Then push in and release the Tuning button to confirm your selection.
Using the radio’s menu
The radio’s menu can be used to configure the radio’s AM / FM region, and to set the dock and features such as the snooze time and emergency alerts. Follow these steps to open and navigate the radio’s menu:
- Press and hold the Info / Menu button for 2-3 seconds then release to access the radio’s menu.
- Rotate the Tuning button left or right to select a menu option.
- Push in and release the Tuning button to confirm your selection.
- Repeat steps 2 and 3 if the item or option that is selected require additional configuration.
Note: Options that are specific for a certain mode (e.g. the AM region) can only be accessed by accessing the menu while in AM mode.
Specifications
Power Requirements
Mains| AC 100-240 V 50/60 Hz, DC 19V / 1.8A Center Pin Positive (AC / DC
switching adapter)
Remote Control Battery| 2 x AAA
Frequency Coverage
Region A (Most countries) FM: 87.5-108, 100kHz| Region A (Philippines,
Romania) AM: 522-1710, 9kHz
Region B (US, Mexico, Canada) FM: 87.5-107.9, 200kHz| Region B (US, Mexico,
Canada) AM: 520-1710, 10kHz
Region C (Most countries) FM: 87.5-108, 50kHz| Region C (Southeast Asian) AM:
522-1620, 9kHz
Region D (Brazil, Japan) FM: 76-108, 100kHz| Region D (Brazil) AM: 522-1629,
9kHz
Antenna system| FM telescopic antenna
---|---
AM Built-in ferrite antenna
AM external antenna terminal
Bluetooth
Bluetooth specification| Bluetooth. Version 5.2
Profile Support| A2DP. AVRCP
Bluetooth Audio CODEC| SBC, AAC (MPEG2)
Transmitting Power Specification| Power Class 2
Line of sight range| lOmeters / 30feet
Speaker Output Power| 15W at 100Hz
Headphones Socket| 3.5mm dia. Stereo jack
1 mW + 1 mW
Aux In Socket| 3.5mm dia. Stereo jack
Input sensitivity| input: 300mV: output: 15W at 100Hz.
USB Type-C socket| 5V / 3A Max. (Standby mode)
5V / 1.5A Max. (Power on mode, except AM mode)
Operating temperature range| 0°C to +35°C
Sangean reserves the right to amend the specifications without notice.
RECYCLING This product bears the selective sorting symbol for Waste
electrical and electronic equipment (WEEE). This means that this product must
be handled pursuant to European directive 2012/19/EU in order to be recycled
or dismantled to minimize its impact on the environment.
https://www.facebook.com/sangeanradio/
3A87g90S10030
https://www.instagram.com/sangeanradio/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>