NXT POWER CASE 4 240 Input VAC 60 Hz Power Conditioner User Manual
- June 13, 2024
- NXT POWER
Table of Contents
240 input VAC 60 Hz Power conditioner Product Specification
(7000 VA) CASE 4
CASE 4 240 Input VAC 60 Hz Power Conditioner
| Model No. | NPT7000-H-NS |
|---|---|
| Part No. | 13-00700-XX |
| Power Rating (VA) | 7000 |
| Input Voltage (AC) | 240 |
| Output Voltage (AC) | 240/120 |
| Output Current amps (per leg) | 29 |
| THD | <1% added |
| Overload rating (amps) | |
| 8 milliseconds | 330 |
| 1 Second | 105 |
| 10 Seconds | 66 |
Voltage regulation no
load to full load| 3%
BTU/hour at full load| 716
Safety Listing / compliance| cULus / RoHS
Input Plug| See below
Output Receptacle| See below
Weight (Shipping) lbs| 143.75
NOISE ATTENUATION: When an ANSI/IEEE C62.41 Category A surge is applied in either common or normal mode to the input of the unit <10.0 V normal mode and <0.5 V common mode will be produced on the output. The product employs an isolation transformer and is a separately derived system. A new neutral to ground bond is established on the output of the power conditioner.
CASE 4 UNIT DIMENSIONS (In inches)
-XX = For part numbers use the below chart to configure the unit with the correct input voltage, plug and receptacle.
-01 = 240 VAC input 240/120 out Hard Wired
Warranty/Support: NXT POWER warrants its power conditioners to be free from defects in materials and workmanship for a period of five years from the date of shipment. For North American service or support on any NXT POWER product, please contact NXT POWER Technical Support at (877) NXT-POWR or 877-698-7697 or visit the NXT POWER website at www.nxtpower.com.
022-00065– Rev A (11/20)
www.nxtpower.com