NXT POWER NPT6000-H-NS Power Conditioner Instruction Manual
- June 13, 2024
- NXT POWER
Table of Contents
NXT POWER NPT6000-H-NS Power Conditioner
Product Information
- The power conditioner is a high-capacity device designed to regulate and protect electrical power supply. It is capable of handling a power rating of 6000 VA and operates at an input voltage of either 208 or 240 VAC with a frequency of 60 Hz.
- The power conditioner, identified by the model number NPT6000-H-NS and part number 13-00600-XX provide an output voltage of 208 or 240 VAC and 120 VAC. It delivers an output current of 29 amps per leg.
- The power conditioner features a THD (Total Harmonic Distortion) rating that ensures clean and stable power transmission. It has overload protection with a rating of 8 milliseconds for instantaneous spikes, 1 second for short-term overloads, and 10 seconds for sustained overloads.
- The voltage regulation of the power conditioner maintains stability from no load to full load, ensuring a consistent power supply regardless of the connected devices’ power demands.
Product Usage Instructions
- Ensure that the input voltage matches your power source. The power conditioner supports either 208 or 240 VAC input.
- Connect the power conditioner to the power source using appropriate cables or connectors.
- Verify that the output voltage matches your equipment requirements. The power conditioner provides both 208/240 VAC and 120 VAC outputs.
- Connect your devices to the power conditioner’s output using suitable cables or connectors.
- Monitor the load on the power conditioner to prevent overloading. The rated output current is 29 amps per leg.
- In case of sudden spikes or short-term overloads, the power conditioner will protect your connected devices. It can handle instantaneous spikes for 8 milliseconds, short-term overloads for 1 second, and sustained overloads for 10 seconds.
- If the power conditioner experiences sustained overloads, reduce the load or disconnect non-essential devices to prevent damage.
- Ensure proper ventilation and keep the power conditioner in a well-ventilated area to prevent overheating.
- Refer to the user manual for further details on maintenance, troubleshooting, and safety precautions.
208/240 input VAC 60 Hz Power conditioner Product Specification
(6000 VA) CASE 4
Model No. | NPT6000-H- NS |
---|---|
Part No. | 13-00600- XX |
Power Rating (VA) | 6000 |
Input Voltage (AC) | 208 or 240 |
Output Voltage (AC) | 208, 240/120 |
Output Current amps (per leg) | 29 |
THD | <1% added |
Overload rating (amps) | |
8 milliseconds | 330 |
1 Second | 105 |
10 Seconds | 66 |
Voltage regulation no load to full load |
3%
BTU/hour at full load| 594
Safety Listing / compliance| cULus / RoHS
Input Plug| See below
Output Receptacle| See below
Weight (Shipping) lbs| 144.0
NOISE ATTENUATION: When an ANSI/IEEE C62.41 Category A surge is applied in either common or normal mode to the input of the unit <10.0 V normal mode and <0.5 V common mode will be produced on the output. The product employs an isolation transformer and is a separately derived system. A new neutral-to- ground bond is established on the output of the power conditioner.
CASE 4 UNIT DIMENSIONS
(In inches)
- XX = For part numbers use the below chart to configure the unit with the correct input voltage, plug, and receptacle.
- 01 = 208 VAC input 208, 240/120 out Hard Wired
- 02 = 240 VAC input 208, 240/120 out Hard Wired
Warranty/Support
NXT POWER warrants its power conditioners to be free from defects in materials
and workmanship for a period of five years from the date of shipment. For
North American service or support on any NXT POWER product, please contact NXT
POWER Technical Support at
(877) NXT-POWR or 877-698-7697 or visit
the NXT POWER website at www.nxtpower.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>