NXT Power CASE 1 Wall Mount Instructions

NXT Power CASE 1 Wall Mount

Product Information

The product is a wall mount case available in three different sizes: Case 1, Case 2, and Case 3. Each case has specific dimensions and features.

INSTALLATION

Case 1

NOTE:
ALL DIMENSIONS IN INCHES

1. REF 3D CAD DATABASE FOR DIMENSIONAL INQUIRIES
2. ALL PARTS TO BE FREE FROM SHARP EDGES (DEBURR)
3. INK STAMP, ETCH, OR STAMP FINISHED PART # AND REV ON INSIDE SURFACE OF PART

• Dimensions: 5.7 inches (width) x 4.5 inches (height)
• Revision: A
• Material: Not specified

Case 2

NOTE:
ALL DIMENSIONS IN INCHES

1. REF 3D CAD DATABASE FOR DIMENSIONAL INQUIRIES
2. ALL PARTS TO BE FREE FROM SHARP EDGES (DEBURR)
3. INK STAMP, ETCH, OR STAMP FINISHED PART # AND REV ON INSIDE SURFACE OF PART

• Dimensions: 7.5 inches (width) x 4.5 inches (height)
• Revision: A
• Material: Not specified

Case 3

NOTE:
ALL DIMENSIONS IN INCHES

1. REF 3D CAD DATABASE FOR DIMENSIONAL INQUIRIES
2. ALL PARTS TO BE FREE FROM SHARP EDGES (DEBURR)
3. INK STAMP, ETCH, OR STAMP FINISHED PART # AND REV ON INSIDE SURFACE OF PART

• Dimensions: 11.3 inches (width) x 6.0 inches (height)
• Revision: A
• Material: Not specified

Product Usage Instructions

To use the wall mount case, follow these instructions:

1. Ensure that all parts of the case are free from sharp edges (debur).
2. Refer to the 3D CAD database for dimensional inquiries.
3. Ink stamp, etch, or stamp the finished part number and revision on the inside surface of the part, unless otherwise specified.

Please note that all dimensions are in inches and are given in decimal format.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>