NXT POWER NPT2000-X-NS Power Conditioner Instruction Manual
- June 13, 2024
- NXT POWER
Table of Contents
NXT POWER NPT2000-X-NS Power Conditioner Instruction Manual
X = H Hard Wired input and output
NOISE ATTENUATION: When an ANSI/IEEE C62.41 Category A surge is applied in
either common or normal mode to the input of the unit <10.0 V normal mode and
<0.5 V common mode will be produced on the output. The product employs an
isolation transformer and is a separately derived system. A new neutral to
ground bond is established on the output of the power conditioner.
CASE 4 UNIT DIMENSIONS (In inches)
-XX = For part numbers use the below chart to configure the unit with the correct input voltage, plug and receptacle.
-01 = 208 VAC input 208/120 out, L14-20P, (1) L14-20R and (2) 5-20R duplex
-02 = 240 VAC input 208/120 out, L14-20P, (1) L14-20R and (2) 5-20R duplex
-03 = 208 VAC input 208/120 out, 14-20P, (1) L14-20R and (2) 5-20R duplex
-04 = 240 VAC input 208/120 out, 14-20P, (1) L14-20R and (2) 5-20R duplex
-05 = 208 VAC input 208/120 out, L6-20P, (1) L6-20R and (2) 5-20R duplex
-06 = 240 VAC input 208/120 out, L6-20P, (1) L6-20R and (2) 5-20R duplex
-07 = 208 VAC input 208/120 out, 6-20P, (1) L6-20R and (2) 5-20R duplex
-08 = 240 VAC input 208/120 out, 6-20P, (1) L6-20R and (2) 5-20R duplex
-20 = 208 or 240 VAC input 208,240/120 out Hard Wired
Warranty/Support: NXT POWER warrants its power conditioners to be free from defects in materials and workmanship for a period of five years from the date of shipment. For North American service or support on any NXT POWER product, please contact NXT POWER Technical Support at (877) NXT-POWR or 877-698-7697 or visit the NXT POWER website at www.nxtpower.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>