INTELLINET 561891 24 Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports Instruction Manual
- June 13, 2024
- INTELLINET
Table of Contents
INTELLINET 561891 24 Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports
Product Information
- The 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports (Model 561891, IPS-24G02-370W) is a high-performance network switch designed by Intellinet Network Solutions. It features Green Ethernet Technology, which detects link status to all connected devices and reduces power usage for ports not in use. The switch can also adjust the power output based on the length of the network cable connected to each port, ensuring maximum network performance while conserving energy and saving money.
- The switch is equipped with LED indicators on the front panel to provide status information for power, link/activity/speed, and PoE (Power over Ethernet) for individual ports. It supports Cat5e/6/6a/8.x UTP/STP cables for optimal performance.
- For detailed specifications, visit the official Intellinet Network Solutions website at intellinetnetwork.com. To register your product warranty, visit register.intellinet-network.com/r/561891 or scan the QR code on the cover of the user manual.
Product Usage Instructions
- Mounting: Use the screws provided with the equipment rack to mount the Intellinet Network Solutions switch to the rack.
- LED Indicators:
- PWR (Power): Green LED indicates power off, and an orange LED indicates power on.
- Link/Act/Speed: Orange LED indicates no device connected to the port, green LED indicates a device connected at 10/100 Mbps speeds, and flashing green LED indicates a device connected at 1000 Mbps speeds.
- PoE: Green LED indicates no powered device (PD) connected to the port, and flashing green LED indicates abnormal power supply.
- Proper Setup and Operation: If a status LED doesn’t indicate a link or activity, check the corresponding device for proper setup and operation.
For additional benefits:
Scan to register your product warranty or go to: register.intellinet- network.com/r/561891
Instructions
The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports offers an array of time-saving, cost-effective features while providing superior network throughput. No configuration is required and installation is plug and play. With a backplane speed of 52 Gbps, plenty of performance is available for your computers, servers and other networking devices. Each of the ports automatically senses the link speed of the connected network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance. This PoE switch is designed to provide compatible devices with enough power when needed. It offers up to 30 watts of power per port until its power budget of 370 watts is reached.
Green Ethernet Technology
This Intellinet Network Solutions switch detects link status to all connected
devices and reduces the power usage of ports not in use. In addition, the
switch can adjust the level of power output based on the length of the network
cable connected to a particular port. This feature allows for the enjoyment of
maximum network performance, and when things slow down, it automatically
scales back power usage to conserve energy and save money.
For specifications, visit intellinetnetwork.com. Register your product at
register.intellinet-network.com/r/561891 or scan the QR code on the cover.
**Front Panel
**
| LED | COLOR | STATUS | STATUS DESCRIPTION |
|---|---|---|---|
| PWR | Off | Power Off | |
| Green | On | Power On | |
| Link/Act/ Speed (1-24, 25F-26F [SFP]) | Off | No device |
is connected to the port.
Orange| On| A device is connected to the port at 10/100 Mbps speeds.
Green| On| A device is connected to the port at 1000 Mbps speeds.
Orange / Green| Flashing| Sending or receiving data
PoE (1-24)
| ****
Green
| Off| No powered device (PD) is connected to the port.
On| The connected device is receiving power.
Flashing| Abnormal power supply
Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn’t indicate a link or activity, check the corresponding device for proper setup and operation.
Slide Switch
- Normal: default mode; allows normal communication between ports 1 – 26.
- Flow Control: disables the switch’s flow-control function.
- VLAN: isolates ports 1 – 24 from each other while allowing them to connect to ports 25 and 26.
Rear Panel
Power
Use the included power cord to connect the device (on the rear panel) to an AC
outlet. The device supports AC 100 – 240 V, 50/60 Hz.
Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal
connector is used to provide proper grounding for your Intellinet Network
Solutions switch. If you use the chassis grounding screw, it should be wired
to an object that provides earth ground. In rackmount installations, grounding
is typically provided by the metal frame of the mounting rack.
Placement
Desktop Installation
Prior to use, it is recommended that the switch be placed/positioned on a
level surface that can support the weight of the switch (and possibly other
objects) with at least 25 mm (approx. 1”) of clearance for ventilation; away
from sources of electrical noise (radios, transmitters, broadband amplifiers);
and within 100 m (approx. 328’) of network devices it’s to be connected to.
Rackmount Installation
The switch can be mounted in an EIA standard-sized, 19-inch rack. Attach the
mounting brackets on the switch’s side panels (one on each side) and secure
them with the screws provided.
Use the screws provided with the equipment rack to mount the Intellinet Network Solutions switch to the rack.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT (Applicable In The European
Union And Other European Countries With Separate Collection Systems)
This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.
WARRANTY AT:
REGULATORY STATEMENTS
FCC Class A
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the Federal Communications Commission
(FCC) Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency
energy, and if not installed and used in accordance with the instruction
manual may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at his own
expense. Any changes or modifications made to this equipment without the
approval of the manuafacturer could result in the product not meeting the
Class A limits, in which case the FCC could void the user’s authority to
operate the equipment.
CE
This device complies with the requirements of CE 2014/30/EU and / or
2014/35/EU. The Declaration of Conformity for is available at: support
.intellinet-network.com/barcode/561891
North America
IC Intracom America 550 Commerce Blvd. Oldsmar, FL 34677 USA
Asia & Africa
IC Intracom Asia 4-F, No. 77, Sec. 1, Xintai 5th Rd. Xizhi Dist., New Taipei
City 221, Taiwan
Europe
IC Intracom Europe Löhbacher Str. 7, D-58553 Halver, Germany
All trademarks and trade names are the property of their respective owners.
All trademarks and trade names are the property of their respective owners. ©
IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark
of IC Intracom, registered in the U.S. and other countries
Printed on recycled paper.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>