JONES STEPHENS 9781452 Brushed Nickel Universal Tank Lever Instructions
- June 13, 2024
- JONES STEPHENS
Table of Contents
JONES STEPHENS 9781452 Brushed Nickel Universal Tank Lever
Product Information
The 8-Way Universal Tank Lever is a versatile lever designed for use with various types of toilet tanks. It can be installed on both the left and right sides of the tank, as well as vertically on the side. The lever comes with a mounting base, short and long arms, a handle, a wing screw, and a flapper chain.
Product Usage Instructions
Installation: Left & Right Side Lever Position
- Remove the old lever from the tank.
- Insert the mounting base into the square hole on the tank with the TOP facing upward. Tighten the locknut in a counter-clockwise direction. Do not overtighten.
- For left mount installation, snap the short arm with handle onto the mounting base, paying attention to the arm dropping angle. For right mount installation, follow the same step on the opposite side.
- Use the wing screw to combine the short and long arms. Adjust the lever angle based on the tank’s front, angle, or side mount.
- If necessary, cut the arm to the appropriate length.
- Hook the flapper chain to the lever arm.
Installation: Vertical Side Mount Handle
- Insert the mounting base into the tank lever with the TOP facing outward.
- Follow steps 3 through 6 of the above installation instructions.
Note: The instructions provided are in English.
INSTALLATION: LEFT & RIGHT SIDE LEVER POSITION
-
Remove old lever.
-
Insert mounting base to tank square hole – The “TOP” should be in upward direction. Tighten locknut with counter-clockwise direction. (Don’t overtighten the nut.)
-
Snap short arm with handle paying attention to the arm dropping angle.
-
Use wing screw to combine short and long arm. Adjust lever angle base on tank for front/angle/side mount.
-
If necessary, cut the arm to the appropriate length.
-
Hook flapper chain to lever arm.
INSTALLATION: “VERTICAL” SIDE MOUNT HANDLE
-
Insert mounting base to tank lever – “TOP” should be facing outward direction.
-
Follow installation steps 3 through 6 as outlined above.