MEAN WELL GEM40I05-P1J 40W AC-DC Reliable Green Interchangeable Medical Adaptor Owner’s Manual

40W AC-DC Reliable Green Interchangeable Medical Adaptor GEM 40I series

GEM40I05-P1J 40W AC-DC Reliable Green Interchangeable Medical Adaptor

https://www.youtube.com/watch?v=ouJ1SBaOALM&list=PLvUyt_OJELVrHoIIRgvHF2NQ-j39-NH-J&index=4
https://www.meanwell.com/Upload/PDF/Adaptor_EN.pdf

Features

• Interchangeable AC plugs (plug kit sold sperately)
• Medical safety approved (2 x MOPP) according to ANSI/AAMI ES60601 -1 /ES60601 -1 -1 1 ,BS EN/EN60601 -1 /BS EN/EN60601-1-11
• Extremely Low leakage current
• No load power consumption< 0.1W
• Energy efficiency Level \ I
• -25-+70°C wide range working temperature
• Class II power (no earth pin)
• Protections: Short circuit / Overload / Over voltage
• Fully enclosed plastic case
• Various DC plug quick adapter accessory available (Plug kit sold sperately, please refer to :https://www.meanwell.com/upload/pdf/DC plug.pdf ) 3 years warranty

Applications

• Blood glucose meter
• Blood pressure meter
• Nebulizer
• Inhaler
• Portable medical device
• Sleep apnea devices

GTIN CODE

MW Search: https:// www.meanwell.com serviceGTIN.aspx

Description

GEM40I is a highly reliable, 40W wall-mounted style single-output green medical adaptor series, which is compact and convenient for carry. This product is equipped with an interchangeable AC plug (4 types, including European type,  USA type, U.K. type and Australian type) that makes it very suitable for businessmen to use in the major countries around the globe. GEM40I is a class II power unit (no FG), accepting the input range from 80VAC to 264VAC that it can  satisfy the demands for various types of medical electrical devices. The circuitry design meets the international medical standards (2*MOPP), having an ultra low leakage current (<100pA), fitting the medical devices in direct electrical  contact with the patients.
With the working efficiency up to 90.5% and the extremely low no-load power consumption below 0.1W, GEM40I is compliant with the latest USA energy regulation EISA 2007/DoE(Level VI) and EU ErP. The supreme feature allows the adaptor to save the energy when it is under either the operating mode or the standby mode. The entire series is approved for international safety regulations; moreover, it adopts the 94V-0 flame retardant plastic case that it can effectively prevent users from electric hazard.

Model Encoding

Interchangeable AC plug Specifically for GEM06/12/18/30/40/60I

SPECIFICATION

ORDER NO.| GEM40105-P1J| GEM40I09-P1J| GEM40112-P1J| GEM40115-P1J| GEM40I18-P1J| GEM40124-P1J| GEM40148-P1J
---|---|---|---|---|---|---|---
OUTPUT| SAFETY MODEL NO.| GEM40105| GEM40109| GEM40112| GEM40115| GEM40118| GE M40124| GE M40148
DC VOLTAGE Note.2| 5V| 9V| 12V| 15V| 18V| 24V| 48V
RATED CURRENT| 5A| 4A| 3.33A| 2.66A| 2.22A| 1.66A| 0.83A
CURRENT RANGE| 0 – 5A| 0 – 4A| 0 – 3.33A| 0 – 2.66A| 0 -2.22A| 0 – 1.66A| 0 – 0.83A
RATED POWER (max.)| 25W| 36W| 40W| 40W| 40W| 40W| 40W
RIPPLE & NOISE (max.) Note.3| 100mVp-p| 100mVp-p| 100mVp-p| 120mVp-p| 120mVp-p| 120mVp-p| 200mVp-p
VOLTAGE TOLERANCE Note.4| ±5.0%| ± 5.0%| ±3.0%| ±3.0%| ± 2.0%| ±2.0%| ±2.0%
LINE REGULATION Note.5| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%
LOAD REGULATION Note.6| ±5.0%| ±5.0%| ±10%| ±3.0%| ±2.0%| ±2.0%| ±2.0%
SETUP, RISE, HOLD UP TIME| 500ms, 30ms, 16ms/230VAC 500ms, 30ms, 16rns/115VAC at full load
INPUT| VOLTAGE RANGE Note.?| 80 -264VAC 113- 370VDC
FREQUENCY RANGE| 47 – 63Hz
EFFICIENCY (Typ.)| 84%| 187%| 188% 188%| | 188%| 189%| 191.%
AC CURRENT| 1A/115VAC 0.6A/ 230VAC
INRUSH CURRENT (max.)| Cold start 30A/ 115VAC 65A/ 230VAC
LEAKAGE CU RRENT(max.)| Touch current <100pA/264VAC
PROTECTION| OVERLOAD| 105 -160% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE| 110 – 140% rated output voltage
Protection type : Clamp by zener diode, output short
ENVIRONLENT| WORKING TEMP.| -25 – +70°C (Refer to ‘Derating Curve’)
WORKING HUMIDITY| 20% – 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -25– +85°C, 10-95% RH non-condensing
TEMP. COEFFICIENT| ±0.03% / 1; (0 – 40t)
VIBRATION| 10- 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y. Z axes
SAFETY &
EMC (Note. 8)| SAFETY STANDARDS| TUV BS ENIEN60601-1/BS ENEN60601-1-11ANSIIAAtAIES60601-1/ES60601-1-11(3.1 versice), CANICSA-C22 NO.60601-134 (dice, EAC TP TC 004 approed
ISOLATION LEVEL| Pimary- Secondary: 2 x MOPP
WITHSTAND VOLTAGE| I/P-0/P:5656VDC
ISOLATION RESISTANCE| I/P-0/P:100M Ohms / 500VDC / 25°C/ 70% RH
EMC EMISSION| Parameter| Standard| Test Level! Note
Conducted emission| BS EN/EN55011 (CISPR11),FCC PART 18| Class B
Radiated emission| BS EN/EN55011 (CISPR11),FCC PART 18| Class B
Harmonic current| BS EN!EN61000-3-2| Class A
Voltage flicker| BS EN/EN61000-3-3|
EMC IMMUNITY| BS EN/EN60601-1-2, BS EN/EN61204-3
Parameter| Standard| Test Level! Note
ESD| BS EN/EN61000.4-2| LeveI4, 15KV air ; Level 4, 8KV contact
RF field susceptibility| BS EN/EN61000 -4-3| Level 3, 10V/m(80MHz-2.7GHz)Table 9, 9-28V1m(385MHz-5.78GHz)
EFT bursts| BS EN/EN61000.4-4| Level 3, 2KV
Surge susceptibility| BS EN/EN61000-4-5| Level 3, 1KV/Line-Line
Conducted susceptibility| BS EN!EN61000-4-6| Level 2, 3V
Magneticfield immunity| BS EN/EN61000-4-8| Level 4, 30A/m
Voltage dip, interruption| BS EN/EN61000-4-11| >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods
OTHERS| LIFE| 3 years : 100% load 40°C, 12hours/ day
MTBF| 400Khrs min. MIL-HDBK-217F(25°C)
DIMENSION| 75.5’39.1’56.2mm (L’W’H)
PACKING| 200g ; 60pcs/ 13kg / CARTON
CONNECTOR| PLUG| See page 4-5; other type available by customer requested
CABLE| See page 4-5 ; other type available by customer requested
NOTE| 1. All parameters are specified at 230VAC input, rated load, 25t: 70% RH ambient.
2. DC voltage: The output voltage set at point measure by plug terminal & 50% load
3. Ripple & noise are measured at 20MHz by using a 12″ twisted pair terminated with a 0.1pf & 47pf capacitor.
4. Tolerance: includes set iv tolerance, line regulation, load regulation. aline regulation is measured from low line to high line at rated load.
6. Load regulation is measured from 10% to 100% rated load.
7.Derating may be needed under low input voltage. Please check the Berating curve for more details.
&The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC cirectives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on http://www.meanwell.com)
,,:: Product Liability Disclaimer : For detailed information, please refer to https://www.meanwell.com/serviceDisclaimeraspx

Derating Curve

Mechanical Specification

DC output plug

◎ Standard plug: P1J

◎ DC plug changeable through:

1. Customization of the standard part with an optional DC plug according to the table (MOQ applicable)
2. Quick adapter accessory (sold separately without MOQ) Please refer to below table and online selection guide :

Example quick adapter accessory:
◎ Optional DC plug: (Available in customized cable or quick adapter)

Installation Manual
Please refer to : http://www.meanwell.com/manual.html

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>