NEO NAS-AB06W WiFi Smart Home Sensors Instructions

NAS-AB06W WiFi Smart Home Sensors
Instructions

Thanks for Choosing our WiFi Smart Home Sensors

Product Configuration

Installation

1. Backplate installation
   ● Mark the position of the backplate holes on the wall and drilled ● Align the backplate holes with the wall holes and fix with screws ● Finish！

2. Device installation
   ● Align the racks on the backplate with the device mounting holes then fix it

● Finish！ Note：

1. When installing, please align the solar panel with the position where the sun shines for the longest time.
2. If there is no sun for two consecutive months, remove the device and charge it through USB.

Specifications

charge.
Charge port:| Type-C
Wi-Fi type:| 2.4GHz
Wi-Fi standard:| IEEE 802.11b/g/n
Wireless range:| 45m(Max)
Working current:| 700mA(Max)
Standby current:| 2.5mA
Type of alarm ringtone:| 3
Maximum alarm sound:| 1M–95dB; 3M–90dB
Bluetooth version:| Bluetooth 5.0
Waterproof rate:| IPX5
Working temperature:| -10℃～60℃（14°F～140°F）
Working humidity:| 0% ～ 90%RH(Non condensation)
Storage temperature:| -20℃ ～ 70℃ (-4°F～158°F)
Storage humidity：| 0% ～ 90%RH(Non condensation)
Size:| 200mm x 150mm x 66mm
Solar panel size:| 132mm x 62mm

LED State

2.Support Bluetooth configuration

Get Started

Download APP
Download the “Smart life” app from APP Store or Google Play to your mobile.

http://smartapp.tuya.com/smartlife

Register and Login
2-1 Launch the “Smart life” app.
2-2 To register, enter your mobile phone number or email address, create a password ,then login to the app.
2-3 Login if you have an account already.
Add Device
3-1 Wi-Fi Mode(Default)

• If you have not turned on the Bluetooth function of your phone, please add devices manually.
• Select the “+” symbol on the top right-hand corner.
• Click “Add Device”– Add Manually “lug(BLE+Wi-Fi)” enter Wi-Fi Mode.

Note:

• If the indicator light is of, please press and hold the reset button for 6 seconds, then add the device according to the status of the indicator light.
• All Wi-Fi products can be added with any Wi-Fi option, and the device only supports 2.4GHz Wi-Fi signals.

3-1 Smart Wi-Fi Mode
Press the reset button until the indicator light blink quickly, then follow the APP prompts to add. 3-2 Bluetooth Mode
3-2-1 Bluetooth Pairing(Add Automatically)

• First open the Bluetooth function of your phone.
• Then enter the app, the “Devices to be added” window will pop up automatically.

3-2-2 Bluetooth network (Add Manually)

• If it does not automatically pop up, you can add the device by following the steps below.

Functions and Settings

1. Alarm type selection
2. Alarm state display; Click to remove the alarm when it is reported
3. Record, you can view the alarm history record of the device.
4. Smart, setting smart linkage
5. Alarm setting and battery status4-6 Device Settings 4-6-1 Share Device

4-6-2 Remove Device
Clear records; Delete the device through the APP and add the device again to clear the historical record
Push Notification Setting
If it is disabled, all devices in the APP will not receive notification, but message records will not be affected.You can experience more functions of the product with the app, just try and do it yourself.
Due to the app update, the above interface is for reference only

Make Your Home Smarter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>