R V R ELETTRONICA TX500SS Broadcast Systems User Manual
- June 13, 2024
- R V R ELETTRONICA
Table of Contents
R V R ELETTRONICA TX500SS Broadcast Systems User Manual
File name: capitoli_en.p65
Version: 1.0
Date: 02/12/2002
Revision History
TX500 – User Manual
Versione 1.0
© Copyright 2002
R.V.R. Elettronica SpA
Via del Fonditore 2/2c – 40138 – Bologna (Italia)
Telefono: +39 051 6010506
Fax: +39 051 6011104
Email: info@rvr.it
Web: www.rvr.it
All rights reserved Printed and bound in Italy. No part of this manual may be reproduced, memorized or transmitted in any form or by any means, eletronic or mechanic, including photocopying, recording or by any information storage and retrieval system, without the permission of the copyright owner.
Notification of intended purpose and limitations of product use This product
is a FM transmitter intended for FM audio broadcasting. It utilises operating
frequencies not harmonised in the intended countries of use. The user must
obtain a license before using the product in intended country of use. Ensure
respective country licensing requirements are complied with. Limitations of
use can apply in respect of operating freuency, transmitter power and/or
channel spacing.
Declaration of Conformity Hereby, R.V.R. Elettronica SpA, declares that this
FM transmitter is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
1. Introduction
This manual describes the TX500SS, a radio transmitter for frequency
modulation audio broadcasting.
The TX500SS is a modular device, built up of components assembled in a 19″
rack, complete with electrical and RF wiring.
This manual shall be read together with the manuals of the different
components, that are attached herewith.
Details about warranty, safety, working priciples and technical specifications
are given in the single manuals.
2. Configurations
2.1 General
The essential components of the TX500SS are:
- 1 PTX30LCD/s Exciter;
- 1 PJ500M LCD Amplifier.
Different configurations of the transmitter are available. The costumer will choose the one that best fits his need in terms, e.g. of redudancy or telecontrol capabilities.
This chapter describes the different configurations the TX500SS can have. Please note that transmitters layouts given herein are reference ones; the height of the racks and the disposition of the modules may vary and will be specified at the time of placing the order. The model names of the different transmitters refer to the components included.
2.2 TX500SSRD/RDS
This version is the most complete version of the TX500SS. With respect to the “essential” components, it features:
- Double exciters (2 PTX30LCD/s);
- Double RDS encoders (2 TRDS4001);
- Automatic change-over unit (SCM1+1 LCD);
- Telemetry unit (TLC300).
Of course, it also includes the PJ500M-C RF amplifier.
2.3 TX500SSRD
This version of the transmitter gives to the customer the benefit of redundant exciters and remote control. It is composed of:
- Double exciters (2 PTX30LCD/s);
- Automatic change-over (SCM1+1 LCD);
- Telemetry unit (TLC300);
- Amplifier (PJ500M LCD).
2.4 TX500SSD/RDS
This version of the transmitter gives redundant exciters and RDS coders.
It consists of:
- Double exciters (2 PTX30LCD/s);
- Double RDS encoders (2 TRDS4001);
- Automatic change-over (SCM1+1 LCD);
- Amplifier (PJ500M LCD).
2.5 TX500SSD
This version is composed of:
- Double exciters (2 PTX30LCD/s);
- Automatic change-over (SCM1+1 LCD);
- Amplifier (PJ500M LCD).
2.6 TX500SSR/RDS
This version of the transmitter is tele-controllable and includes the RDS
coder.
It is composed of:
- Exciter (PTX30LCD/s);
- RDS encoder (TRDS4001);
- Telemetry unit (TLC300);
- Amplifier (PJ500M LCD).
2.7 TX500SSR
This is the simplest telemetries version of the TX500SS.
This version is composed of:
- Exciter (PTX30LCD/s);
- Telemetry unit (TLC300);
- Amplifier (PJ500M LCD).
2.8 TX500SS/V2
This version is composed of:
- Exciter (PTX30LCD/s);
- Amplifier (PJ500M LCD).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>