Coleman B01N19AN6F Airbed Single Instruction Manual

: June 5, 2024
: Coleman

Table of Contents

1. WARNINGS
2. INFLATION INSTRUCTIONS
3. DEFLATION INSTRUCTIONS
- 3.1 Using Campingaz® / Coleman® pump* (F)
- 3.2 Without use of pump* (B)
4. CAMPINGAZ® INSTRUCTIONS CONVERTIBLE QUICKBEDTM
- 4.1 Zip
- 4.2 Fold and snap:
5. TAKING CARE OF YOUR AIRBED
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Coleman B01N19AN6F Airbed Single Instruction Manual

Coleman B01N19AN6F Airbed Single Instruction Manual

Airbed Single / Double

Coleman B01N19AN6F Airbed Single Instruction Manual - Airbed
Single Coleman B01N19AN6F
Airbed Single Instruction Manual - Airbed Single

Instruction leaflet Airbed Single / Double

IMPORTANT INFORMATION

CAREFULLY READ THE INSTRUCTION MANUAL BEFORE USE.
DISCARD RED TUBE LOCATED ON THE EXTERNAL STOPPER OF THE INFLATION VALVE. IT IS THERE FOR SHIPPING PURPOSES ONLY. KEEP AWAY FROM CHILDREN.
DO NOT LET INFLATABLE PRODUCTS COME IN CONTACT WITH SHARP, POINTED OBJECTS THAT MAY PUNCTURE THE PLASTIC MATERIAL.
FILL WITH COLD AIR ONLY. NEVER USE A HAIR DRYER TO INFLATE, THIS COULD CAUSE MELTING.
DO NOT OVER INFLATE. BURSTING ITEMS CAN CAUSE SERIOUS INJURY. INFLATE THE AIRBED UNTIL MOST OF THE WRINKLES IN THE MATERIAL ARE GONE AND THE BED FEELS FIRM TO THE TOUCH.

Danger: This airbed is not suitable for children under 3 years of age, or for any people who require assistance.

Caution: air temperature and weather do affect the air pressure in inflatable products. In cold weather your airbed will lose some pressure due to the fact that the air will contract. If this occurs, you may want to add a little air to improve your airbed’s performance. However, in hot weather, the air will expand. You must let some air out to prevent the airbed from failing due to overpressure. You should avoid exposing your airbed to extreme temperature (hot or cold).

1. WARNINGS

DO NOT USE THIS AIRBED AS A RAFT OR A BOAT.
DO NOT INFLATE WITH AN AIR COMPRESSOR.
KEEP AWAY FROM FIRE.

2. INFLATION INSTRUCTIONS

2.1 To inflate using Campingaz® / Coleman® pump*

Open the valve (A).
Pull the external stopper to extend the valve out (B).
Attach adapter nozzle of the pump to the airbed valve by twisting it gently. Turn on the pump to inflate (C).
When fully inflated, seal valve by pushing in with pump nozzle.
Gently twist adapter sleeve to right, backing the pump out of valve while maintaining the seal (D).
Close the external stopper.
Valve should appear depressed into itself (E).

2.2 To inflate using foot pump* or other inflation device Important:

the nozzle must fit snugly into extended valve for good inflation results.

To begin inflation, open external stopper and pull to extend out (B).
Insert nozzle of inflation device into the extended valve and turn on or begin pumping (D).
To close valve: push in with inflation device until stopper has been depressed, sealing internal stopper. Remove device and close external stopper. Valve should appear depressed into itself (E). *
Note: pump is sold separately.

2.3 If you have purchased the Coleman® Comfort Bed Double / Maxi Comfort

Bed Double Coleman®.

This airbed is a patented double airbed with two different chambers. To inflate your airbed, inflate the two chambers using the two valves.

3. DEFLATION INSTRUCTIONS

3.1 Using Campingaz® / Coleman® pump* (F)

Remove adapter nozzle from inflation end and attach to opposite deflation side of the pump.
Repeat same steps as inflation. This will draw the air out very quickly.

3.2 Without use of pump* (B)

To deflate, open external stopper and pull to extend out allowing air to escape.
When fully deflated, close stopper.

4. CAMPINGAZ® INSTRUCTIONS CONVERTIBLE QUICKBEDTM

4.1 Zip

Zip both single airbeds together with the built-in zipper (H) located on the middle of the two beds to make a double-size airbed (I).

4.2 Fold and snap:

Fold the double-size airbed in half (J) to create a single double high airbed (K). Then snap the beds together by locking the integrated straps into the opposite bed (L).