LG ST-1630F LED Screen Stand Owner’s Manual
- June 16, 2024
- LG
Table of Contents
OWNER’S MANUAL
Stand For LG LED Screen
Please read this manual carefully before install & operating your set and
retain it for future reference.
ST-1630F Stand Installation
Technical Data
Model name | ST-1630F |
---|---|
Material | Aluminum Profile,Steel |
Surface Finish | Power Coating (Matte Black) |
Recommended Screen Size | 163″ |
Allowable Loads | 300kg (Maximum) |
Lift Range | 0/200/400mm |
Certification | CB,CE-LVD,ETL,RoHS2.0 |
Stand Dimension (W x D x H) | 3097 x 1420 x 2200mm |
3097 x 1420 x 2400mm
3097 x 1420 x 2600mm
Stand Base Dimension (W x D x H)| 2007 x 1420 x 63mm
Caster Wheel Size (Diameter)| 63mm
Wooden Case Dimension (W x D x H)| 2088 x 1536 x 620 mm
Weight (Net/Gross)| 150kg/230kg
This model (ST-1630F) is a stand for the LAEC018-GN2 AIO model only.
The stand has 3 levels to change the height of the screen and comes assembled
as LEVEL 1.
The height can be changed if needed, and it is described on the page of 4.
The distance from the floor to the bottom of the screen is shown in the table.
Determine the height of your SCREEN and proceed first if you need to change
the height of the STAND.
Level | Height |
---|---|
Level 1 | ≈32cm |
Level 2 | ≈52cm |
Level 3 | ≈72cm |
Packing List
Item | Description | Photo | Qty. |
---|---|---|---|
1 | Stand Base | 1 | |
2 | Right Vertical Support Column | 1 | |
3 | Left Vertical Support Column | 1 | |
4 | Mounting Frame Horizontal Left | 2 | |
5 | Mounting Frame Horizontal Right | 2 | |
6 | Mounting Frame Horizontal | ||
Reinforcing Rib | 2 | ||
7 | Mounting Frame Horizontal | ||
Support Part | 1 | ||
8 | Mounting Frame Left Part | 1 | |
9 | Mounting Frame Right Part | 1 | |
10 | Mounting Frame Middle Left | 1 | |
11 | Mounting Frame Middle Right | 1 | |
12 | Screw M8X20mm | 30 | |
13 | Screw M4X15mm | 48 | |
14 | Screw M6X20mm | 76 | |
15 | 8mm Hex Key | 1 | |
16 | Anti-Static Gloves | 4 | |
17 | Screwdriver | 1 |
Adjust the stand height (item 2& item 3)
Step1. Loosen the screw as the following position.Step2. Fixing the screw as following position is Level 2 and Level
3 : The position is for Level 3
: The position is for Level 2
Step3. Follow the steps below(from page 6) to connect the plate
Assemble the stand
Step1. Install the main body (Vertical Support Column) to the stand base.
Note: The front of the vertical support column is where the tapped holes
for the screws are visible. Use 30pcs M8X20 screws (Item 12) to install the
Item 2 and Item 3 on the stand base (Item 1).
Step2. Connect the panel mounting plate. Step3. Make one more in the
same way as step 2.
Step4. Install the panel mounting plate to Vertical Support Column. Use 36pcs M6X20 (Item 14) hexagon socket head cap screws to
install Item 7 and assembly parts in step 2 onto Item 2 and Item 3.
Step5. Install the panel mounting plate to the main body mounting bracket.
Use 40pcs M6X20 (Item14) hexagon socket head cap screws to install
Item10, Item11, Item8 and Item9 to the main body mounting bracket.
Screen assembly
The 12 PCS fixed screw behind the cabinet are assembled to the cabinet and
locked with tools.
Hex screw + Mounting lock Note: Please follow the order of the
arrows to install the screen.
The model and serial number of the product are located on the back and on one
side of the product. Record them below in case you ever need service.
MODEL……………………….
SERIAL……………………..
NO.
Temporary noise is normal when powering ON or OFF this device.
References
- LG Electronics & Home Appliances | Shop Now | LG USA
- LG Electronics & Home Appliances | Shop Now | LG USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>