systemair ICF 20-55 Ceiling Fans Instruction Manual

June 13, 2024
systemair

systemair-logo

systemair ICF 20-55 Ceiling Fans

systemair-ICF-20-55-Ceiling-Fans-product

Product Information

The ICF 20/55 is a product with the item number 11800. It is available in two types: ICF20 and ICF55. The height of both types is 545 mm, while the weight is 6.2 kg. The installation of the product requires a space of 2.7 m x 2.3 m, with a thickness of 84 mm. It is suitable for IPX5 protection.

Product Usage Instructions

  1. Ensure you have the necessary space for installation: 2.7 m x 2.3 m with a thickness of 84 mm.
  2. Place the ICF 20/55 in the designated location.
  3. Connect the wiring according to the provided wiring diagrams (ICF20/55).
  4. If using a sensor, install it either on the ceiling or floor as indicated.
  5. Make sure the product is properly connected to the power supply (230V~).
  6. For relay connection, follow the specified instructions for L (L) and N terminals.
  7. Perform regular maintenance as described in section 19 of the manual.

For any further information or inquiries, please contact Frico at +46 31 336 86 00 or email mailbox@frico.se. You can also visit their website at www.frico.net for updated information and local contacts.

Dimension

Item number| Type| Height [mm]| Ø

[mm]

| Weight [kg]
---|---|---|---|---
11800| ICF20| 545| 1422| 6,2
11729| ICF55| 545| 1422| 6,2

Installation

systemair-ICF-20-55-Ceiling-Fans-fig- \(2\) systemair-ICF-20-55-Ceiling-Fans-fig- \(3\) systemair-ICF-20-55-Ceiling-Fans-fig- \(4\) systemair-ICF-20-55-Ceiling-Fans-fig- \(5\)

Maintenance

systemair-ICF-20-55-Ceiling-Fans-fig- \(6\)

Wiring diagrams

Wiring diagrams ICF20/55

systemair-ICF-20-55-Ceiling-Fans-fig- \(7\)

Connection for reverse rotation

Installation and operating instructions

General Provisions
Please read these carefully instructions before the installation and operation of curtains. Keep the instructions in a safe place for later use if necessary. Warranty is supported only if complied with provisions of this Instruction.

Application area
Ceiling fans are predominantly used to equalize temperatures in rooms with high ceilings. Warm air that collects under the ceiling is forced downwards so that temperature leveles off in altitude premises. Warm air sinks thereby reducing heat loss through the ceiling and heating costs are reduced.

  • Protection class ICF20: IPX0.
  • Protection class ICF55: IPX5.

Installation
Ceiling fans evenly are located indoors and use gives the effect of optimal temperature distributions. Make sure that in no fan installation locations possibility of accidental contact between rotating blades with foreign objects. Should not be placed there where the airflow will impact people. The rotation speed should be adjusted so that the work fans would not cause drafts.

Ceiling Fan Installation and electrical connection
See Figures 1-19.

  • Max. ambient temperature +40 °C.
  • The electrical connection must carried out by a qualified electrician in accordance with current regulations norms and standards.

Operation and Maintenance
See Figures 20-22

Ceiling fans ICF20/55 do not require mandatory technical maintenance, but periodically necessary visual inspection.

Attention!
To avoid falling, regularly inspect the mounting points of the base fan to ceiling structures.

Before starting any work for service, turn off the circuit breaker and unplug the cable power from the outlet. In case the speed fan rotation is adjustable with one control panel, their speed may vary slightly. Usually, it goes away after a week’s operation.

Another reason for different speeds of rotation may be that the screws fasten the lower protective covers too tight. Loosen the screws in if necessary.

Security measures
This device is not intended for for use by children under 8 years of age, by people who not have undergone special training, or by persons with limited legal capacity, unless they are accompanied or are not instructed by staff, responsible for their safety. Children don’t have free access to this device. If children are attracted to cleaning or maintaining the device, requires strict supervision person responsible for their safety.

The characteristics of the supply network must comply with the parameters specified on information plate A (Fig. 2).

Main office

Frico AB

For the latest updated information and information about your local contact: www.frico.net.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals