TRUCK F-250 Mud Flap Set Single Rear Wheel Installation Guide

June 13, 2024
TRUCK

TRUCK F-250 Mud Flap Set Single Rear Wheel Installation Guide
TRUCK F-250 Mud Flap Set Single Rear Wheel

Mounting Diagram & Instructions

IMPORTANT

The manufacturer is not responsible for negligent use of vehicle with mud flaps installed, including over-tightening of screws and bolts causing damage to vehicle or mud flaps.
Before you install your Mud Flap Set, see the diagram and parts list for all necessary parts.
All hardware should be loosely installed until all mounting points have been installed and flap has been levelled. It is suggested that final tightening of hardware be done with hand tools to avoid over-tightening.

TOOLS REQUIRED

  • 10mm open or socket wrench

  • 7/16” open and socket wrench

  • 5/16” open or socket wrench

  • Push Pin Removal Tool

  • 1/4″ open or socket wrench

FLAPS AND BRACKETS

  • (1) Mud Flap Driver Side

    1. Mud Flap Passenger Sid
  • (1) Threaded Bracket Driver Side Part #770745

  • (1) Threaded Bracket Passenger Side Part #770746

  • (1)Mount Bracket Driver Side Part #770743

  • (1) Mount Bracket Passenger Side Part #770744

PARTS BAG # 770761
  • a) (4) Caps crew. SS “-20UNC x 1 Part #014007

  • b) (2) Caps crew, SS, Balk Ox. “-20UNC x 3/8” Part # 014069

  • c) (4) Caps crew, SS, Balk Ox. “-20UNC x 3/4” Part # 014070

  • ) (6) Caps crew, SS Balk Ox “-20UNC x 1” Part #01 4073

  • e) (4) Shut MT Screw 8-15 x 1.25” SS Balk Ox Part #016059

  • f) (10) Washer, Flat 0.281″x1″SS Part # 018068

  • g) (10) Washer, Flat 0.281″ x 1″ SS Blk Ox. Part # 018069

  • h) (4) Washer, Flat 0.203″ x 1″ SS Blk Ox Part # 018070

  • i) (8) Washer, Lock 1/4” Helicoil, SS Part # 024000

  • j) (8) Hex Nut ¼”-20, SS Part # 025000

  • k) (2) Flange Nut ¼”-20, Serrated Part #025034

  • l) (2) Spring Nut ¼”-20UNC, 0.54”, SS Part #028010

  • m) (2) Spring Nut ¼”-20 UNC,27/32”,SS Part #028011

  • n) (10) Washer, Nylon 0.318” x 1”Part #0`54061

  • o) (4) Washer, Nylon 0.265” x 0.625” B Part # 054071

  • p) (4) Washer, Nylon 0.281” x 1” Blk Part # 054084

  • q) (2) J-Clamp 1.5” x 2.5” Part #767417

  • r) (1) Mount Clip DS Part # 769308

  • s) (1) Mount Clip PS Part #769309

  • t) (1) Protective Tape Universal, 2 pc Part #770681

  • u) (2) Wedge Plate Universal Part #770747

Installation Instruction

Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            
Installation Instruction            

Please check out our YouTube channel to see an install video for this application

1520-33 St N Lethbridge, AB TIH 5H3

Canada Toll free : 1-800-661-8208
Email: info@truckhardware.ca
www.truckhardware.ca

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals