Truck Hardware GCN410F Lightning Mud Flap Set Front User Guide
- June 13, 2024
- TRUCK HARDWARE
Table of Contents
Truck Hardware GCN410F Lightning Mud Flap Set Front
Product Information
- Product Name: 21-C Ford F150 Raptor Mud Flap Set
- Mounting Diagram & Instructions: Front
- Kit Number: GCN410F
- Manufacturer Disclaimer: The manufacturer is not responsible for negligent use of the vehicle with mud flaps installed, including over-tightening of screws and bolts causing damage to the vehicle or mud flaps.
Tools Required:
- 7mm Open Wrench or Socket Wrench
- 1/4 Open Wrench or Socket Wrench
- 7/16 Open Wrench and Socket Wrench
- Push Pin Removal Tool
Flaps & Brackets:
- (1) Flap Assembly, Front, DS
- (1) Flap Assembly Front, PS
- (2) Rubber Flap Universal 12 x 8-3/4
- (2) Washer Plate Front, Part #759979
- (1) Brace, DS Front Part #759973
- (1) Brace, PS Front Part #759974
Parts Bag #770512:
- (4) Cap Screw, SS Blk Ox. 1/4-20UNC x 3/8 Part #014069
- (2) Cap Screw, SS Blk Ox. 1/4-20UNC x 1.5 Part #014074
- (4) Sheet Mtl Screw #8-18 x 1.5 SS Blk. Ox. Part #016063
- (2) Washer, Flat 0.281 x 1 SS Part #018068
- (6) Washer, Flat 0.281 x 1 SS Blk Ox. Part #018069
- (4) Washer, Flat 0.203 x 1 SS Blk Ox. Part #018070
- (4) Spring Nut, SS 1/4-20UNC, 27/32 Reach Part #028011
- (2) Washer, White Nylon 0.318 x 1 x 0.04 Part #054061
- (4) Washer, Black Nylon 0.203 x 0.885 x 0.062 Part #054080
- (4) Spacer Washer, HDPE 7/16 x 1 x 1/4 Part #054091
Installation Instructions
- Before you install your Mud Flap Set, see the diagram and parts list for all necessary parts.
- Place mud flap holes #3 and #4 over factory screws, and mark flare through mud flap holes #1 & #2 to indicate placement of spring nuts (j). Remove the mud flap.
- Install spring nuts (j) on flare-over marks made in step 2.
- Remove the (2) factory screws from factory holes #8 & #9 on the inside of the fender.
- Loosely install brace holes #11 and #12 to the existing factory lower fender bolts using serrated flange nuts (i).
- Loosely secure washer plate hole #6 through mud flap hole #3 to factory hole #8, and mud washer plate hole #7 through mud flap hole #4 to factory hole #9 using sheet metal screw (c), flat washer (f), and nylon washer (l).
- Loosely secure mud flap holes #1 & #2 to spring nuts (j) using cap screw (a), flat washer (e), and spacer washer (m).
- Loosely install mud flap hole #5 to bracket hole #10 using cap screw (b) and flat washer (e) and secure using a nylon washer (k), flat washer (d), lock washer (g), and hex nut (h).
- Using a square or other leveling tool, ensure the mud flap is level and tighten all fasteners.
- Repeat the procedure on the passenger side.
IMPORTANT:
The manufacturer is not responsible for negligent use of the vehicle with mud
flaps installed, including over-tightening of screws and bolts causing damage
to a vehicle or mud flaps.
TOOLS REQUIRED
FLAPS & BRACKETS
PARTS BAG # 770512
INSTALLATION
(For ease of installation it is suggested that the wheel be removed)
- Before you install your Mud Flap Set, see the diagram and parts list for all necessary parts.
- Place mud flap holes #3 and #4 over factory screws, and mark flare through mud flap holes #1 & #2 to indicate placement of spring nuts (j). Remove the mud flap.
- Install spring nuts (j) on flare-over marks made in step 2.
- Remove the (2) factory screws from factory holes #8 & #9 on the inside of the fender.
- Loosely install brace holes #11 and #12 to the existing factory lower fender bolts using serrated flange nuts (i).
- Loosely secure washer plate hole #6 through mud flap hole #3 to factory hole #8, and mud washer plate hole #7 through mud flap hole #4 to factory hole #9 using sheet metal screw (c), flat washer (f), and nylon washer (l).
- Loosely secure mud flap holes #1 & #2 to spring nuts (j) using cap screw (a), flat washer (e), and spacer washer (m).
- Loosely install mud flap hole #5 to bracket hole #10 using cap screw (b) and flat washer (e) and secure using a nylon washer (k), flat washer (d), lock washer (g), and hex nut (h).
- Using a square or other leveling tool, ensure the mud flap is level and tighten all fasteners.
- Repeat the procedure on the passenger side.
- Note: This washer plate is used in multiple applications.
- The center hole in the washer plate is not utilized for installation of the GCN410F Mud Flap
- Please check out our YouTube channel to see an install video for this application Raptor Front Install Sheet
- 1520 – 33 5t N
- Lethbridge. AB T1H 5H3 Canada
- Toll free: 1-800-661-8208
- Email: info@truckhardware.ca
- www.truckhardware.ca
Documents / Resources
|
Truck Hardware GCN410F Lightning Mud Flap Set
Front
[pdf] User Guide
GCN410F Lightning Mud Flap Set Front, GCN410F, Lightning Mud Flap Set Front,
Mud Flap Set Front, Flap Set Front, Set Front
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>