ET2 Contemporary Lighting E20107-24 Starburst 8-Light Pendant Instruction Manual
- June 9, 2024
- ET2 Contemporary Lighting
Table of Contents
ET2 Contemporary Lighting E20107-24 Starburst 8-Light Pendant
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation: Keep any packaging materials away from children.
Low Voltage LED Lighting Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur.
- Do not cut factory connections unless instructed by the manufacturer
- Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with soft cloth and a mild detergent. DO not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sourcesmay cause glazing, melting and scorching, or even cause color to fade.
PARTS
INSTALLATION INSTRUCTION
CRITICAL INSTRUCTION
WIRING DIAGRAM (ONLY FOR REFERENCE)
DO NOI ATTEMPT TO CUT FACTORY CONNECTIONS WITHOUT QUALIFIED KNOWLEDGE.
MODIFICATIONS MADE TO THIS PRODUCT WITHOUT THE CONSENT OF THE MANUFACTURER
WILL VOID WARRANTY.
SCHEMATIC FOR GENERAL REFERENCE ONLY
If fixture does not light, reverse polarity.
FOR OPTIMAL USE
Lutron:
- TGCL-153PR
- TGCL-153PH
- CTCL-153PDH
- CTCL-153PR
- SCL-153PR
- DVWCL-153PH
- DVCL-153PR
- MACL-153MH
Leviton:
- IPL06
- 6672(1 B4605)
- DSL06-1 LZ
- 6631 ( 104505)
- 667 4-POW
- Cooper: SAL06P AAL06-C2
- Eaton: SAL06P-W-2K-L
- Legrand: LSCL453PWCCV4
Must be installed by a licensed electrician with knowledge of electronic lighting systems
Documents / Resources
| ET2
Contemporary Lighting E20107-24 Starburst 8-Light
Pendant
[pdf] Instruction Manual
E20107-24 Starburst 8-Light Pendant, E20107-24, Starburst 8-Light Pendant,
8-Light Pendant, Pendant
---|---