EKVIP 022057 Height Adjustable Desk Instruction Manual
- June 12, 2024
- EKVIP
Table of Contents
022057 Height Adjustable Desk
Instruction Manual
ITEM NO: 022057
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference. (Translation of the original instructions).
Jula reserves the right to make changes.
For latest version of operating instructions, see
www.jula.com
2023-02-03
© Jula AB
JULA AB, BOX 363, SE-532 24 SKARA EU DECLARATION OF CONFORMITY
Jula Item number 022057
Model no.: 01027655
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the
manufacturer.
OFFICE DESK ELECTRIC
Conforms to the following directives, regulations and standards:
| Directive/Regulation | Harmonised standard |
|---|---|
| MD 2006/42/EC | EN 60335-1:2012+A11+A13+A1+A14+A2+A15; EN 62233:2008; EN ISO |
12100: 2010
EMC 2014/30/EU| EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN IEC
61000-3-2:2019 +A1, EN 61000-3-3:2013+A1+A2
RoHS 2011/65/EU + 2015/863| EN 50581:2012
This product was CE marked in year: Dit product werd CE-gemarkeerd in het
jaar: -22
Skara 2022-11-15 MARIA SIHVONEN GRAHN
BUSINESS AREA MANAGER (Signatory for Jula and authorised to compile the
technical documentation.
SAFETY INSTRUCTIONS
SYMBOLS
| Read the instructions.
---|---
| Approved in accordance with the relevant directives.
| Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
| Size | 120 x 60 x 74.5–120.5 cm |
|---|
DESCRIPTION
FIG. 1
- Power indicator light
- Lifting button
- Lowering button
ASSEMBLY
-
Fitting of foot
FIG. 2 -
Fitting of crossbar
FIG. 3 -
Fitting of sidebar
FIG. 4 -
Fitting the drive rod: Put the left end of the drive rod in the hexagonal attachment on the left leg as shown in the figure on the right. Hold the hexagonal attachment on the right so that the drive rod cannot move and tighten the nuts.
FIG. 5 -
Put the right end of the drive rod in the right leg and put the hexagonal attachment in place as shown in the figure on the right. Tighten the screw.
FIG. 6 -
Fitting table.
FIG. 7 -
Fitting the control panel.
FIG. 8 -
Connection of control panel.
FIG. 9
USE
INITIATION/RESETTING
Initiation must be carried out before the product is used för first time and
when resetting.
-
Connect to the power supply. The indicator light on the manual controller turns to a flashing blue light.
-
Keep the lowering button pressed while the table is moving.
The table goes to its lowest position and then lifts a little, the light turns to a flashing purple. -
Release the lowering button when the light turns to a flashing purple.
HEIGHT ADJUSTMENT
- Lifting button: Press the button to lift the table.
- Lowering button: Press the button to lower the table.
When the standing desk cannot lift or the lifting does not stop, unplug the power supply, wait for 5–10 minutes, plug the power supply back in and press the button again.