LOGIC H3 PC Case User Manual
- June 9, 2024
- Logic
Table of Contents
LOGIC PC CASE
USER’S MANUAL
PC CASE
Introduction:
Thank you for purchasing the LOGIC computer case.
To ensure safe, proper and long lasting work of a computer please follow below
instructions and ensure proper operating conditions.
Warnings and safety:
PC Power Supply is an electrical device operating at high voltage which is
dangerous to life or health of people: AC 220-240V / 50Hz / 4-6A.
Unauthorized enclosure opening, the insertion of objects into the interior may
cause electric shock. After disconnecting the power supply from the mains, for
a long time dangerous high voltage is stored in capacitive elements
(capacitors).
AC adapter designed exclusively for home or office use in desktop PCs.
You should not perform the following steps for safety reasons under the
penalty of loss of rights coming from the warranty or guarantee:
- Do not touch neither the power supply nor PC computer with wet or damp hands or other wet objects.
- Do not place the computer with the power supply in the vicinity of the heater or another heat source.
- Do not block the fan and ventilation ducts of the computer.
- Do not use the power supply in conditions of increased humidity or increased dustiness.
- Do not open and do not modify the wiring and / or connectors and other components of power supply.
- Do not insert objects into the openings of power supply.
- Do not remove any marks, seals, labels or serial numbers from power supply.
Quick start guide / installation:
-
Open the housing.
-
Install all the components of your computer by following the guidelines contained in individual assembly instructions for each component.
-
Install power supply and connect it to components of computer according to instructions from the power supply’s manual and instructions from manual of
components that require power connection.
a) If the power supply is mounted at the top of the case, the fan should be directed to the interior of the housing (down)
b) If the power supply is mounted in the bottom of the case, we suggest that the fan is facing the interior of the housing (up)
c) If using the housing with different than above power supply location, remember to keep proper air circulation inside the housing. -
Check the assembly of components and power connections.
-
Close the cover.
-
Connect the monitor, keyboard, and other accessories to the PC.
-
Connect the power cord into the power supply and 230V electrical outlet.
-
Turn the power switch on the power supply to “I” position (if any).
Maintenance of power supply:
Computer power supply should be periodically cleaned of impurities resulting
from the air circulation flowing through its interior. Before cleaning of the
power supply with compressed air make sure that the power supply has been
disconnected from the 230V power mains. Cleaning of the power supply should be
done outside the building or in a room with the installed dust exhaust system.
Basic cleaning involves blowing dirt from inside the power supply and fan
blades. If dirt cannot be removed with compressed air and intervention to the
interior of the power supply is required, please take it to the seller during
the period of guarantee / warranty or to specialized computer repair service.
Use of contaminated power supply may cause malfunction of computer, reducing
the efficiency of the cooling system and lead to serious accidents. This
device was designed and made of high-quality reusable materials and
components. If the device, its packaging, user’s manual, etc. are marked with
crossed waste container, it means they are subject to segregated household
waste collection in compliance with the Directive 2012/19/UE of the European
Parliament and of the Council. This marking informs that electric and
electronic equipment shall not be thrown away together with household waste
after it’s been utilised. The user is obliged to bring the utilised equipment
to electric and electronic waste collection point. Those running such
collection points, including local collection points, shops or commune units,
provide convenient system enabling to scrap such equipment. Appropriate waste
management aids in avoiding consequences which are harmful for people and
environment and result from dangerous materials used in the device, as well
as improper storage and processing. Segregated household waste collection aids
recycle materials and components of which the device was made. A household
plays crucial role in contributing to recycling and reusing the waste
equipment. This is the stage where the basics are shaped which largely
influence the environment being our common good. Households are also one of
the biggest users of small electrical equipment. Reasonable management at this
stage aids and favours recycling. In the case of improper waste management,
fixed penalties may be imposed in accordance with national legal regulations.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>