tommee tippee 0549457 Musa Comfi Spout Cup User Guide

: June 13, 2024
: Tommee Tippee

Table of Contents

tommee tippee 0549457 Musa Comfi Spout Cup
Product Information
Product Usage Instructions
SAFETY GUIDANCE
STORAGE AND USE
INSTRUCTIONS FOR CLEANING
Documents / Resources

tommee tippee 0549457 Musa Comfi Spout Cup

Product Information

The MUSA SIPPEE/SPORTEE-VALVE CUPS are designed for holding hot liquids. They have a capacity of 240mm and are made with high-quality materials to ensure durability and safety. The cups come with a lid, a hard valve, a soft spout, and a silicone spout for comfortable drinking. The product is manufactured by Mayborn (UK) Limited and/or its affiliates.

Product Usage Instructions

Before first use, disassemble all the components and clean them thoroughly.
Place the components in boiling water for 5 minutes to ensure hygiene.
After each use, wash the product immediately.
To clean the cup, unscrew the lid and open the hood to expose the spout. Gently push out the hard valve from under the lid using your thumb.
To remove the spout, hold the cup by the handles and push the spout towards the open lid using your thumbs.
Gently pull the spout to remove the soft spout and valve.
After cleaning, shake the parts to remove excess water and let them air dry before reassembling.
To reassemble the cup, align the two parts (hard and soft) of the valve and press them together.
Ensure that parts A and B of the soft side are fully pushed through the holes of the hard side to ensure proper functioning of the valve. Squeeze slit B to ensure it opens before use.
Insert the silicone spout with the hard valve attached into the lid and gently pull it until the edge is flat on the lid.
Push the hard valve firmly until the two side clips lock it into place.
Screw on the lid. When using the cup, flip the lid open and click it into place to secure it while drinking.

For any further inquiries or assistance, please visit our website: tommeetippee.com

SAFETY GUIDANCE

For your child’s safety and health WARNING!

Always use this product with adult supervision. Accidents have occurred when babies have been left alone with drinking equipment due to the baby falling or if the product has been disassembled.
Never use feeding spouts or straws as a pacifier.
Continuous and prolonged sucking of fluids will cause tooth decay. Tooth decay in young children can occur even when non-sweetened fluids are used. This can occur if the baby is allowed to use the cup for long periods through the day and particularly through the night, when saliva flow is reduced or if it is used as a pacifier.
Always check food temperature before feeding.
Throw away at the first signs of damage or weakness.
Keep components not in use out of the reach of children.
Never attach to cords, ribbons, laces or loose parts of clothing. The child can be strangled.
To avoid scalding, do not use the cup with hot liquid.
Do not use the cup or any part of the cup as a toy

STORAGE AND USE

Inspect before each use.
Do not store or leave in direct sunlight or near a source of heat.
Do not store with or allow to come into contact with solvents or harsh chemicals.
Not suitable for use in a conventional oven, a combination microwave oven or any other heating device.
Not suitable for microwave use apart from sterilizing. See cleaning and sterilization instructions.
Suitable for milk, water, or juices that don’t contain pulp.
DO NOT use with fizzy (carbonated) beverages, formula or hot liquids.

INSTRUCTIONS FOR CLEANING

Before first use, disassemble and thoroughly clean. Place components in boiling water for 5 minutes. This is to ensure hygiene. Before each and every use clean carefully. Always wash the product immediately after use.

Unscrew the lid, open the hood to expose the spout and use your thumb to gently push out the hard valve from under the lid.
To remove the spout, hold the cup by the handles and with your thumbs, push the spout towards the open lid.
Pull the spout gently to remove the soft spout and valve.
- Wash all parts thoroughly in warm soapy water and rinse in clean water. To prevent damage, avoid using a brush on part B of the valve (as shown in image 1).
- Do not clean with solvents or harsh chemicals.
- All parts can be washed in the dishwasher (top shelf only).
- Do not allow product to come into contact with oil-based food (e.g. oil/tomato-based sauces) as staining will occur.
- Cups are suitable for sterilization by steam (electric and microwave), boiling or cold water tablet/liquid solution
  INSTRUCTIONS FOR RE-ASSEMBLING YOUR CUP
  Please follow these important instructions. Always shake parts after washing to remove excess water and leave to air dry before reassembling. Your cup could leak or be difficult to drink from if not assembled correctly as follows:
Align the two parts (hard and soft) and press together.
Ensure parts A and B of the soft side are fully pushed through the holes of the hard side. This is essential to make sure the valve functions correctly. Ensure the slit B opens by squeezing before use.
Insert the silicone spout with the hard valve attached into the lid and gently pull the spout until the edge is flat on the lid.
Push the hard valve firmly until the two side clips lock the valve into place.
Screw on lid. When using the cup, flip lid open and click into place to secure when drinking.

All IP rights held or used under licence by
TOMMEE TIPPEE®, BACSHIELD™. Copyright © 2023.
Patented:
https://www.tommeetippee.com/en-us/legals/patent.
Distributed by: Distribuido por: Distribué par: Mayborn USA Inc. 1010 Washington Boulevard, 9th Floor, Stamford, CT 06901

Any questions?
Visit our website: tommeetippee.com

Instructions for use:

Documents / Resources

| tommee tippee 0549457 Musa Comfi Spout Cup [pdf] User Guide
0549457 Musa Comfi Spout Cup, 0549457, Musa Comfi Spout Cup, Comfi Spout Cup, Spout Cup
---|---