NAPOLEON OLKTLV50 Oak Log Placement User Guide
- June 13, 2024
- Napoleon
Table of Contents
OLKTLV50 Oak Log Placement
For Model TLV50
WARNING
- Failure to position the logs in accordance with these diagrams or failure to use only logs specifically approved with this appliance may result in property damage or personal injury.
- Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since appliance may not function properly and delayed ignition may occur.
- The logs are fragile and should be handled with care.
PHAZER™ logs and glowing embers, exclusive to Napoleon, provide a unique
and realistic glowing effect that is different in every installation. Take the
time to carefully position the glowing embers for a maximum glowing effect.
Log colors may vary. During the initial use of the appliance, the colours will
become more uniform as colour
pigments burn in during the heat-activated curing process.
note:
Log numbers are located on the bottom or back of the logs.
Ensure to separate the 2 locating brackets.
Once apart, using a pair of pliers bend the 10 locating tabs to 90°
Starting on the left side of the unit. Remove the 6 screws from the media tray and burner. Place the left bracket on top of the media tray and burner securing it with the screws just removed. Repeat the process for the right side
Ensure the mesh covers are secured back in place.
Burner Overview
1. Place Log #1 behind locating tabs #2 & 3. Ensure the log is against tabs
2. With the charred side facing the burner, place Log #4 in front of locating tabs #6 & 7. Ensure the log is against the tabs.
3. With the charred side facing the burner, place Log #7 behind locating tabs
1 & 4. Ensure the log is against the tab.
4. Place the smaller end of the “Y” on Log #6 behind locating tab #5 placing the opposite end on top of Log #7
5. Place Log #3 behind locating tab #8 and behind locating tab #9 resting the “Y” end on Log #1.
Ensure that no logs are covering any burner ports. Also, ensure there is no impingement of the flame with the logs.
Wolf Steel Ltd., 24 Napoleon Rd.,
Barrie, ON L4M 0G8 Canada
• 1(866)820-8686
W415-4156 / – / 04.25.23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>