Panasonic EH-NE86 Hair Dryer Instruction Manual
- June 13, 2024
- Panasonic
Table of Contents
- Panasonic EH-NE86 Hair Dryer Instruction Manual
- Safety precautions
- WARNING
- ► Plug and Cord
- ► In case of an abnormality or malfunction
- ► Maintenance
- ► This appliance
- ► To protect your hair
- ► Note the following precautions
- ► Note
- A Air outlet
- Handle
- G Ring for hanging
- J Temperature selector
- Power switch **
- How to remove the air boost nozzle
- Insert your finger inside the nozzle to remove.
- Before using, always check that the power switch is at position “”, then
- ► Air boost nozzle
- ► Concentrator nozzle
- ► Diffuser EH-NE86
- ► Note
- ► Note
- About Heat Protection (EH-NE85)
- Maintenance
- Always turn the power switch off and disconnect the plug from the
- ► Note
- Clean the air inlet once a month or more.
- ► Note
- ► Note
- Troubleshooting
- Specifications
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Panasonic EH-NE86 Hair Dryer Instruction Manual
Safety precautions
Make sure to follow these instructions.
To prevent accidents, injuries or damage to property, please follow the
instructions below.
Some parts of the safety precaution illustrations differ from the actual
product.
WARNING
► Plug and Cord
- Do not use with the cord
- Do not damage the cord or
Do not deface, modify, forcefully bend or pull the cord or plug. Also, do not
place anything heavy on, twist or pinch the cord.
- Do not use when the plug or cord is damaged or
- Do not wrap the cord around the main body when
- Do not store or use the cord in a twisted state.
- Disconnect the plug by holding onto it instead of pulling on the cord.
- Always turn off the power switch and disconnect the plug from the household outlet after
- Insert the plug into the household outlet directly: Do not use with an extension
- Fully insert the plug into a household outlet. Never use the appliance if the plug fits
- Always ensure the appliance is operated on an electric power source matched to the rated voltage indicated on the
- When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off .
- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent (described in the warranty), or similarly qualified persons in order to avoid a
► In case of an abnormality or malfunction
-
Immediately stop using and remove the plug if there is any abnormality or
-
Air is not emitted
-
Unit stops sporadically
-
Interior becomes red-hot and smoke is emitted
-
The appliance is damaged or deformed, or strange noise is
Immediately request inspection or repair at an authorized service center.
► Maintenance
- When you see sparks around the air outlet while using the hot air setting, stop using and remove the lint on the air outlet and air
► This appliance
-
Do not block, or insert hair pins or other foreign objects into the air inlet, air outlet, or ion
-
Do not leave the product with the power switch
-
Do not keep within the reach of infants or young children. Do not let them use the
-
Do not use in proximity of flammable materials (such as alcohol, benzine, thinner, spray, hair care product, nail polish remover).
-
Never modify, disassemble, or
-
Doing so may cause ignition or injury due to abnormal operation.
-
Contact an authorized service center for repair.
-
Do not handle any part of the plug or appliance with wet
-
This appliance is not designed for commercial use, and is not intended for use without appropriate
-
Do not immerse the appliance in
-
Do not use or store the appliance near
-
Do not use or store the appliance near bathtubs, showers, basins or other vessels containing
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
CAUTION
► To protect your hair
- Be sure to keep a distance of over 3 cm between the air outlet and your
- Be sure to keep your hair at least 10 cm away from the air inlet to avoid hair getting
► Note the following precautions
- Do not drop or subject to
- Do not use on children under 6 years
- Do not touch the air outlet, air boost nozzle, concentrator nozzle and diffuser which will become very
- Do not use the appliance for any other purpose than drying
► Note
- This hair dryer is equipped with an automatic overheating protective device. If the hair dryer overheats, it will switch to cool air mode. Switch off the hair dryer and unplug it from the household outlet. Allow it to cool down for a few minutes before using it Check that no fluff, hair, etc. is in the air inlets and outlets before switching it on again.
Parts identification
(Some instructions only use the illustrations of EH-NE86 model to explain the product.)
A Air outlet
B Air boost nozzle
C Ion outlet
D Air inlet
E Cool-shot button
The air remains cool whilethe cool-shot button is held down.
Handle
G Ring for hanging
H Cord
I Plug
The shape of the plug
differs depending on the area.
J Temperature selector
*Air temperature of Cool mode is close to room temperature.
Power switch **
**Concentrator nozzle
M Diffuser EH-NE86
How to remove the air boost nozzle
Insert your finger inside the nozzle to remove.
- The nozzle is very hot after use, remove it after the nozzle cools
- If the nozzle needs to be removed immediately after use, use cold air to cool down the
How to use the hair dryer
Before using, always check that the power switch is at position “”, then
plug into a household outlet.
Select the temperature of the airflow with the temperature selector (J).
Select the intensity of the airflow with the power switch (), and then dry
your hair.
Set the power switch to position “ ”, and then remove the plug from the
household outlet.
► Air boost nozzle
For drying hair quickly with high air pressure. High air pressure and squeezed strong airflow dry fast to blow off water droplets on hair.
► Concentrator nozzle
- For precise styling and blow drying, attach the concentrator nozzle to the hair dryer.
- Concentrator nozzle helps to focus and direct the airflow straight to hair for giving more control.
► Diffuser EH-NE86
For creating full-bodied hair with lots of volume and styling, attach the diffuser to the hair dryer.
- For people who want (hair with) volume on top: Apply the diffuser to your scalp at the top of your head, and move the diffuser in a circular motion.
- For people who want volume on their sides: Start from your ear and move the diffuser slowly along above your scalp toward the top of your head. Repeat 2 to 3
- Drying wavy hair: Lay the wavy portion of your hair on the diffuser and dry from the bottom while pushing
**About ion**
Ions are particles that combine negatively charged oxygen and moisture in the
air, and cannot be seen through the naked eye.
(Ion generation method: High-voltage discharge)
► Note
- You may notice a specific odor when using this hair This is not harmful to the human body.
- The effects of ion might not be felt by the following people. People with crimpy hair, strong curly hair, very smooth hair, short hair, or who have had a hair straightening perm in the last three or four months.
**About Professional Heat Protection (EH-NE86) **
This mode provides shiny and smoothness of hair with preventing overheating.
Automatically control optimized hot and cool alternative air like salon blow.
► Note
- Please use the professional heat protection without concentrator
About Heat Protection (EH-NE85)
This mode provides constant and warm temperature to protect hair and scalp from heat
Maintenance
Always turn the power switch off and disconnect the plug from the
household outlet. (Except when performing maintenance on the air outlet)
**Maintaining the hair dryer
** Clean the hair dryer when it gets dirty.
Clean the housing only with a soft cloth slightly dampened with tap water or soapy tap water.
► Note
- Do not use substances such as alcohol, nail polish remover or detergent (hand soap). Doing so may result in malfunction or part cracks or
- Do not leave the appliance with hairdressing products or cosmetics on
Doing so may cause deterioration of the plastic, leading to discoloration or cracks.
**Maintaining the air inlet**
Clean the air inlet once a month or more.
Wipe to clean lint, hair, or other matter from the air inlet with a tissue or toothbrush.
► Note
**Maintaining the air outlet
** Clean the air outlet once a month or more.
Scrub to remove any dust, hair, etc. blocking the mesh.
- The hair dryer should be plugged into the household outlet only in case of maintenance for the air
- Set the temperature selector to “” and the power switch to “ ” for using cool airflow to blow away the dust, etc., as you scrub with the toothbrush.
► Note
- During maintenance, do not block the air inlet with your hands,
- During or after maintenance of the air outlet, dust, etc. may Ensure that the hair dryer blows no dust, etc. from the air outlet before using. (Do not look into the air outlet.)
(Use a commercially available toothbrush.)
**Maintaining the ion outlet**
Clean the ion outlet about once every 6 months. This maintenance allows the hair dryer to sustain the generated level of ion over a long period.
- Use commercially available
- Do not press or rub with your nails or sharp items. Doing so may cause the air inlet to break.
If dust is attached to the inside, remove it with a vacuum cleaner.cotton swabs. (We recommend the thin cotton swabs made for use with babies.)
Softly insert the cotton swab until it stops (approximately 6 mm), and turn it softly for 2 or 3 times.
Maintaining the ion outlet
Clean the ion outlet about once every 6 months. This maintenance allows the hair dryer to sustain the generated level of ion over a long period.
-
Use commercially availablecotton swabs. (We recommend the thin cotton swabs made for use with babies.)
-
Softly insert the cotton swab until it stops (approximately 6 mm), and turn it softly for 2 or 3 times
Troubleshooting
Problem
It switches frequently to cool air while using in “Hot” mode, or sparks can be seen within the body.
(These sparks are caused by the thermostat switch, the protective device, and are not dangerous.)
The hot air repeatedly turns into cool air.
The hot air is abnormally hot.
The plug is abnormally hot.
Sparks are generated inside the ion outlet.
The ion outlet emits a noise (crackling noise).
Possible cause| | Action
---|---|---
Lint has accumulated on the air inlet or air outlet.
Hair or something is blocking the air inlet.
|
Remove accumulated lint. Do not block the air inlet.
The connection to the household outlet is loose.| Use a household outlet that
fits securely.
Abnormality caused by a dirty electrode (needle portion).| Perform maintenance
of the ion outlet.
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair.
Specifications
Product name | Hair Dryer |
---|---|
Product model | EH-NE86, EH-NE85 |
Power source | 220 V |
Power consumption | 1 900 W |
Accessory
| EH-NE86| Air boost nozzle, Concentrator nozzle, Diffuser
EH-NE85| Air boost nozzle, Concentrator nozzle
This product is intended for household use only.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>