SERCOMM 958DSE00GJ Stream TV User Guide

June 13, 2024
Sercomm

SERCOMM 958DSE00GJ Stream TV

Product Information

The Stream TV is a device that allows you to stream content on your TV. It requires a Wi-Fi internet connection and connects to your TV using an HDMI cable. The device comes with a power cord for electrical connection and can be mounted on a wall using the provided bracket. The setup instructions are displayed on the TV screen once the device is connected. For additional setup and troubleshooting information, you can visit support.verizon.com/streamtv or scan the QR code. The device complies with Part 15 of the FCC rules and meets all other requirements specified in Part 15E, Section 15.407. It should not cause harmful interference and must accept any interference received. To ensure compliance with FCC RF exposure requirements, the antenna used with the device must be installed at least 20 cm away from all persons and should not be co-located or operating with any other antenna or transmitter. The Stream TV should be powered by an UL certified Class II power supply or Class II DC source suitable for use at a minimum Tma of 40 degrees Celsius. When wall- mounted, it should not be mounted higher than 2 meters above the floor. Verizon uses and contributes to open source software. For information about the open source software included in the product, as well as other Verizon software, you can visit verizon.com/opensource.

Product Usage Instructions

  1. Ensure you have a Wi-Fi internet connection near your setup location.
  2. Connect the HDMI cable from the Stream TV to your TV.
  3. Connect the power cord from the Stream TV to an electrical outlet.
  4. Turn on your TV and set it to the correct HDMI input.
  5. (Optional) Use the provided bracket to mount the device on a wall.
  6. Once connected, follow the setup instructions displayed on the TV screen.

If you encounter any issues or need further assistance, please contact Verizon for more information.

Let’s get started

Stream TV Before you set up your Stream TV, you’ll need to make the proper connections.

  1. Make sure you have a Wi-Fi internet connection near your setup location.
  2. Connect the HDMI cable from the Stream TV to your TV.
  3. Connect the power cord from the Stream TV to an electrical outlet.
  4. Turn on your TV and set it to the correct HDMI input.

Optional: Use the provided bracket to mount the device on a wall.

Once connected, follow the setup instructions shown on the TV screen.
Enjoy shows and movies on the go. Download the Stream TV App on Google Play™ or the Apple® App Store.™ You can also visit support.verizon.com/streamtv or scan the QR code to learn more about setup and troubleshooting.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC rules.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

RF Exposure Statement: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

UL Statement: This product is intended to be supplied by an UL certified Class II power supply or Class II DC source suitable for use at minimum Tma 40 degree C whose output meets ES1, PS2 and is rated 5VDC, 2A. For wall mounting, this product must not be mounted higher than 2 meters above the floor. If you need further assistance, please contact Verizon for further information. Verizon uses and contributes to open source. For information about the open source used in the software included in this product as well as other Verizon software, visit verizon.com/opensource

110 E Court St #400 Greenville, SC 29601 864-271-0500 DEVC-716671-StreamTV- Sercomm-Collateral-V6.ai

Job Info

  • Client
    • Media Type
  • Verizon
    • Package
  • Vendor Instructions
    • 100% Black
  • Materials
    • White Paperboard
  • Finishing
    • Matte Aqueous Anti-Scratch
  • Notes
    • None

Fonts, Images & Color Key

Fonts Verizon NHG TX, Verizon NHG DS Images None Color Key Black, Dieline, Folds

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals