LC-POWER LC-M27-4K-UHD-144-V2 Gaming Monitor User Guide

LC-POWER LC-M27-4K-UHD-144-V2 Gaming Monitor

Product Information

• Screen Size: 120mm
• Interfaces: HDMI, DP, AUDIO OUT, Type-C, DC IN
• Resolution: 3840 x 2160
• Refresh Rate: 160hz
• Game Settings: Standard Mode, RTS/RPG Mode, FPS Arena Mode, MOBA Arena Mode
• Picture Settings: Contextual Model, Low Blue Light, Sharpness, Gamma, Aspect Ratio, Warm/Natural/Cool
• Color Settings: User1, User2, User3, Hue, Saturation
• Other Settings: Adaptive-Sync, Dynamic Brightness, HDR, MPRT, Ambient Lighting, Brightness, Contrast, DCR
• OSD Settings: ECO

The functions listed in the manual are for reference only.

Product Usage Instructions

1. HDMI interface: Use the HDMI cable to connect the HDMI IN port of the product to the HDMI OUT port of a PC.
2. Type-C interface: Use a Type-C cable to connect to data ports of machines and external terminals.
3. DP Port: Use the DP cable to connect the DP IN port of the product to the DP OUT port of a PC.
4. DC IN interface: Connect the power adapter plug to the corresponding power port of the monitor, and then connect the power cable to a properly grounded power outlet.
5. AUDIO OUT: Connect audio outputting devices such as earphones to the AUDIO OUT port.

Game Settings:

• Standard Mode: Off/On
• RTS/RPG Mode: Off/On
• FPS Arena Mode: Off/On
• MOBA Arena Mode: Off/On

Picture Settings:

• Contextual Model: Low Blue Light
• Sharpness: 0-5
• Gamma: 1.8/2.0/2.2/2.4/2.6/S.curve
• Aspect Ratio: Wide Screen/4:3/1:1/Auto
• Warm/Natural/Cool: Off/On

Color Settings:

• User1: Off/On:0-100(R/G/B)
• User2: Off/On:0-100(R/G/B)
• User3: Off/On:0-100(R/G/B)
• Hue: 0-100(R/G/B/C/M/Y)
• Saturation: 0-100(R/G/B/C/M/Y)

Other Settings:

• Adaptive-Sync: Off/On
• Dynamic Brightness: Off/Normal/Expert/Elaboration
• HDR: Off/HDR Standard
• MPRT: Off/On
• Ambient Lighting: Off/Led Bar
• Brightness: 0-100
• Contrast: 0-100
• DCR: Off/On

OSD Settings:

• ECO: Off/On

The functions listed in the manual are for reference only.

Safety precautions

• Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.
• Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human injury or device damage.
• Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.
• Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
• The range of the supply voltage of the monitor is printed on the label on the rear casing. If it is impossible to determine the supply voltage, please consult the distributor or local power company.
• If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
• Please use a reliable earthing socket, do not overload the socket, or it may cause fire or electric shock.
• Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
• Do not disassemble or repair this product by self to avoid electric shock. lf faults occur, please contact the after-sales service directly.
• Do not pull or twist the power cable forcedly.
• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or the product may be damaged and the warranty will be invalid.

Maintenance

CAUTION: Unplug the power cable from the outlet before cleaning the monitor.

• To clean your screen, slightly moisten a soft, clean cloth with water.
• Please use a special screen-cleaning tissue if possible.
• Do not use benzene, thinner, ammonia, abrasive cleaners or compressed air.
• Inappropriate cleaning solutions may damage the monitor or leave a milky film on the screen or the housing.
• Unplug the monitor if you are not going to use it for a longer time period.
• Do not expose the monitor to dust, liquids or a humid environment.
• In case the monitor gets in touch with any liquid, wipe it down immediately using a dry cloth.

In case any liquid gets spilled into the ventilation holes, do not use the monitor anymore. Please contact a professional service technician.

Legal note:
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Product introduction

Packing list

• Please check that the package of the monitor contains all parts. If any part is lost, please contact your retailer.

Instructions for use

Description of buttons

Explanation of indicators

Indicator: Steady blue light indicates that the power is on and the monitor works normally. Red light indicates that there is no horizontal or vertical synchronous signal detected or no video input signal, and that the monitor is in standby status. Please make sure your computer is turned on and operates normally and check that all video cables are fully plugged in and/or connected to the monitor.

Adjusting the monitor

Installation

Installation of the stand

1. Open the package to take out the monitor in its foam parts box and put it on a flat tabletop. Take off the upper foam part first.
2. Take out the base and stand, and use the thumb screw of the base to lock the stand.
3. Align the base and stand components assembled in step 2 to the mounting slot of the machine and clip them. Note: Slide the quick-disassembly button up with fingers to take out the base and stand components.
4. Simply hold the stand with one hand to let the monitor stand upright.

Note: Do not remove the lower foam part before finishing the installation. Do not pinch the liquid crystal screen with your hand to avoid damage to the screen.

Installation for wall mounting

1. Open the package to take out the monitor in its foam parts box and put it on a flat tabletop.
2. Take out all accessories from the foam parts and take out the upper foam part. Take out four studs for hexagon irons from the accessory bag and lock them on the rear casing.
   • Do not remove the screen from the foam part to avoid damage to the screen.
3. Note: Hang the assembled product on a hard wall. Do not pinch the screen with your hands during the hanging process to avoid damaging the screen.

Note: In order to prevent the monitor from falling when it is used on a wall, please install it properly and securely. Do not place or hang any objects on the wall bracket.

Cable connection

Note: If the power cable or signal cable is damaged, you must replace it immediately.

OSD menu

Menu description

• The color and shape of the OSD menu of the actual monitor may be slightly different from the one shown in the figure below.
• Details of the OSD menu may change with improvements of functions.

The on-screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the monitor is powered on and the M button is pressed.

1. Press the button M to activate the browser screen.
2. Press to scroll through the functions.
   • Select the desired function, and press M to enter the sub-menu.
   • Press  to scroll through sub-menus, and press M to select and confirm the desired function.
   • Press  to select one option, and press M to confirm settings and exit from the current menu.
3. Press E to exit from the menu screen.

The functions list in this manual are for reference only.

Off/Crosshair1/Crosshair2/Crosshair3/Crosshair4/Crosshair5/Crosshair6
Game Time| Off/On:15:00/30:00/45:00/60:00/Position
Dynamic Brightness| Off/Normal/Expert/Elaboration
HDR| Off/HDR Standard
MPRT| Off/On
Ambient Lighting| Off/Led Bar
Picture Settings| Brightness| 0-100
Contrast| 0-100
DCR| Off/On
Contextual Model| Off/On: Movie Mode/Reading Mode/Night Mode
Low Blue Light| 0-100
Sharpness| 0-5
Gamma| 1.8/2.0/2.2/2.4/2.6/S.curve
Aspect Ratio| Wide Screen/4:3/1:1/Auto
Color Settings| Warm| Off/On
Natural| Off/On
Cool| Off/On
User1| Off/On:0-100(R/G/B)
User2| Off/On:0-100(R/G/B)
User3| Off/On:0-100(R/G/B)
Hue| 0-100(R/G/B/C/M/Y)
Saturation| 0-100(R/G/B/C/M/Y)
PIP/PBP| PIP/PBP Mode| Off/PBP 2Win 1:1/PBP 2Win 2:1/PBP 2Win 1:2
---|---|---
Sub-Signal Source| TYPE-C/DP/HDMI1/HDMI2
Audio Source| Auto/TYPE-C/DP/HDMI1/HDMI2
Window Swap| Off/On
OSD Settings| Language| 简体中文/English/한국어 /    /Portugues do Brasilazil / Deutsch/Nederland /Suomi/Français/Eλληvικά/Indonesia/Italiano/日本語/Malaysia/Polskie/ Português/Русский/Español/ไทย/Українська/Tiếng Việt/繁体中文/Türkçe
OSD Time Out| 5-100
OSD H-Position| 0-100
OSD V-Position| 0-100
OSD Transparency| 0-5
Hotkey1 Setting| Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/ Refresh Rate/Game Time/Contextual Model/PIP/PBP Mode/Input Signal/Dynamic Brightness/HDR/Gravity Sensor/Ambient Lighting
Hotkey2 Setting
Hotkey3 Setting
OSD Rotation| Normal/90/180/270
OSD Lock| Off/On
Other Settings| Input Signal| Auto/TYPE-C/DP/HDMI1/HDMI2
Volume| 0-100
Mute| Off/On
HDMI Version| HDMI2.1/HDMI2.0
Auto Power| Off/On
Eyeshield Remind| Off/On
Gravity Sensor| Off/On
Reset| Off/On
Information| Input Source: /Resolution: /Mode:/HDR Ver.:

Basic parameters

The standard voltage and power supply may vary with countries, please refer to the label at the back of the product.
Product dimensions| Without base| 613,3 x 65,2 x 367,3 mm/ approx. 4,13 kg
With base| 613,3 x 269,2 x 551,3 mm / approx. 5,49 kg
Carton dimensions| 895 x 165 x 468 mm
Gross weight| 8,37 kg
Tilting angle| Forward tilting: 5°±2°;backward tilting: 20°±2°
Height adjustm. range| 120 mm (±5 mm)
Rotation angle| -20,0° (±2,0°) – +20° (±2,0°)
Vertical angle| 90° (±2°)
**** Environmental conditions| Usage| Temperature: 0° C ~ 40° C (32° F ~ 104° F) Humidity: 10 % ~ 90 % RH (non-condensing)
Storage| Temperature: -20° C ~ 60° C (-4° F ~ 140° F) Humidity: 5 % ~ 95 % RH (non-condensing)

Silent Power Electronics GmbH
Formerweg 8
47877 Willich
Germany
www.lc-power.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>