RODE 139-950-1-2 Reporter Shuttle Audio Terminal Unit Instruction Manual

RODE 139-950-1-2 Reporter Shuttle Audio Terminal Unit

Product Information

The Reporter is a dynamic microphone designed for professional audio recording. It features an omni-directional polar pattern and a frequency range of 70Hz to 15,000Hz. With a low handling noise and the ability to withstand frequent connections, this microphone is ideal for capturing clear and high- quality audio in various recording environments. The Reporter comes with a mesh head with an internal plosive screen, an extra long handle, an XLR connector, and a microphone flag.

Specifications

• Acoustic Principle: Dynamic
• Polar Pattern: Omni-directional
• Frequency Range: 70Hz – 15,000Hz
• Output Impedance: Not specified
• Sensitivity: Not specified
• Output Connection: XLR
• Weight: 256g (without mic flag), 286g (with mic flag)
• Packed Weight: 1100g
• Dimensions: 41.5mm x 272.5mm x 41.5mm (1.6 x 10.7 x 1.6)

Features

• Low handling noise and unwanted wind noise pickup from any direction
• Ability to withstand frequent connections
• Discreet design

Product Usage Instructions

Using the Reporter:
To use the Reporter microphone, follow these steps:

1. Connect the XLR output of the microphone to the desired audio recording device or mixer.
2. Position the Reporter microphone in front of the sound source, ensuring that the mesh head with the internal plosive screen is facing the sound source.
3. Adjust the audio levels on your recording device or mixer as needed.
4. Record or monitor the audio using headphones or speakers.

Using the Microphone Flag:
The Reporter microphone comes with a microphone flag for branding or identification purposes. To use the microphone flag, follow these steps:

1. Attach the microphone flag to the extra long handle of the Reporter microphone.
2. Ensure that the microphone flag is securely attached and positioned according to your preference.

Optional Accessories:
The Reporter microphone is compatible with the RM5 Microphone Clip, which can be used to securely mount the microphone on a stand or boom pole.

Care Instructions:
When using the Reporter microphone, take care to set the audio levels properly, especially when wearing headphones, as loud sound levels can cause serious hearing damage. Avoid exposing the microphone to excessive moisture or physical damage. Refer to the instruction guide for detailed care instructions.

Warranty / Support:
The Reporter microphone is covered by a warranty that includes parts and labor for repairs during the warranty period. The warranty does not cover defects caused by normal wear and tear, modification, shipping damage, or failure to use the microphone according to the instruction guide. If you experience any problems or have any questions, first contact the dealer who sold you the microphone. If necessary, the dealer will arrange for factory authorized service. For technical support and additional information, visit www.rodemic.com/support.
Please refer to www.rodemic.com/warranty for full warranty terms and conditions.

Introduction

• Thank you for investing in the Reporter.
• The RØDE Reporter is the result of over 30 years of dedicated research and experience in microphone design and manufacture across many fi elds, from music, to broadcast and location sound.
• The RØDE Reporter has been specifi cally designed to deliver a full and rich sound quality when used in the reporting and news gathering fi eld. With its high wind noise rejection and tailored frequency response, the Reporter delivers clear, broadcast quality sound.
• Please take the time to visit www.rodemic.com and register your microphone for a full ten year warranty.
• While there, you can download supporting documents, view studio tips and techniques, as well as browse a comprehensive range of accessories for the Reporter and other microphones.

Specifications

• Acoustic Principle: Dynamic
• Polar Pattern Omni-directional
• Frequency Range : 70Hz ~ 15 000Hz
• Output Impedance: 150 ± 30% at 1kHz
• Sensitivity: -56 dB re 1V/Pa (1.0mV @ 94 dB SPL) ± 3 dB @ 1 kHz
• Output Connection: XLR
• Weight: 256g (without mic fl ag) 286g (with mic fl ag)
• Packed Weight: 1100g
• Dimensions 41.5mm x 272.5mm x 41.5mm (1.6” x 10.7” x 1.6”)

FREQUENCY RESPONSE

POLAR RESPONSE

LOW HANDLING NOISE

• Internal shock mounted capsule reduces unwanted handling noise
• High wind noise rejection
• Custom internal plosives screen to reject vocal plosives and unwanted wind noise

OMNIDIRECTIONAL DYNAMIC MICROPHONE CAPSULE

• Frequency response optimised for speech intelligibility
• Enables the use of fi eld recorders without the ability to supply phantom power
• Omnidirectional pickup pattern ensures smooth, even pickup from any direction

EXTRA LONG HANDLE

• Well balanced, for comfortable handling over long periods
• Allows for mounting of traditional microphone fl ags
• Ensures that you get closer to the source

DIE CAST ALUMINIUM BODY

• Durable body will withstand the tough conditions encountered in the fi eld and during transport
• Light weight for easy handling
• Robust connector, to keep a fi rm hold on XLR cables and withstand frequent connections

MICROPHONE FLAG

• Highly durable Polycarbonate / ABS plastic
• Blank, two-sided for easy screen printing

MATTE FINISH
Ideal for video or TV production, when the microphone must be discreet

What’s in the Box

• RØDE Reporter microphone
• ZP2 zip pouch (located underneath cardboard insert)
• Microphone flag

Reporter Structure

1. Mesh head with internal plosive screen
2. Extra long handle
3. XLR connector
4. Microphone flag

Using the Reporter

• The Reporter is a handheld dynamic microphone, designed for use in the fi eld of news gathering and reporting.
• The Reporter features an omnidirectional capsule. For this reason it is not always necessary to move the microphone back and forth between the interviewer and the person being interviewed.
• In a typical interview scenario the microphone should be held at around chest height between the interviewer and the person being interviewed, to ensure that the microphone picks up the speakers in the immediate vicinity clearly, while reducing the level of any background noise.

Microphone Flag

A custom microphone fl ag is supplied with the Reporter. The microphone fl ag has been designed so that it can be easily screen printed with your organisation’s logo, or a weatherproof adhesive label can be applied using the specifi cations listed below.

Using the Microphone Flag

• To install your microphone fl ag, place the mesh head of the Reporter through the ring on the fl ag, with the RØDE logo centred. Push the fl ag down until it ‘clicks’ in place into the groove on the microphone head. Ensure it is properly secured by giving the fl ag a few light agitations with your hand.

• To remove your fl ag, gently press the edges of the protruding ‘tabs’ on the fl ag to give the ring some leeway. Pull fl ag upwards to remove from the Reporter.

Optional Accessories

RM5 MICROPHONE CLIP
The RM5 stand mount is available to securely mount the Reporter on a microphone stand or boompole, allowing you to place the microphone in the optimal position for hands free recording, or giving the user the additional reach required to get closer to the sound source.

Care Instructions

• When not in use, always keep your microphone in a cool, dry place, preferably in the supplied zip case, to protect from dust or damage. Do not expose the Reporter to rain or moisture.
• In instances where the microphone has become exposed to the elements and the mesh head (wind cover) has become wet or dirty, it may be necessary to remove the head gently and dry it separately to the microphone body to prevent moisture from damaging the microphone capsule. Take care in this operation so as not to damage the microphone during removal.
• Inside the Reporter box, you will fi nd a sachet of moisture absorbent crystals. Please retain these crystals and store with the microphone to keep the microphone in ideal condition. Eventually this pack of crystals will need to be dried. This is indicated by the crystals turning pink in colour. They can easily be re-used by placing them in an oven at 100-150 degrees Celsius for approximately ten minutes. The crystals will operate effectively again once they have turned blue.
• The Reporter has no internal user serviceable parts. Should you encounter a problem, please refer all servicing to qualifi ed service personnel.
  Loud sound levels can cause serious hearing damage.
  Take care when setting the audio levels, especially while wearing headphones.

Warranty / Support

• RØDE Microphones prides itself on designing and manufacturing microphones of the highest quality and performance. Our state-of-the-art engineering and manufacturing techniques, combined with decades of experience in professional audio and recording has resulted in microphones that will last a lifetime.
• All RØDE microphones are guaranteed for one year from the date of purchase. The Reporter warranty may be extended to a full ten year period. Extending your warranty is completely free of charge – simply register your purchase details on the RØDE website at www.rodemic.com/warranty*
• The warranty covers parts and labour that may be required to repair the microphone during the warranty period. The warranty excludes defects caused by normal wear and tear, modifi cation, shipping damage, or failure to use the microphone as per the instruction guide.
• The RØDE Microphones 10 Year Warranty gives you the peace of mind that your investment is protected for many years to come.
• If you experience any problem, or have any questions regarding your microphone, fi rst contact the dealer who sold it to you. If the microphone requires a factory authorised service, return will be organised by that dealer. We have an extensive distributor/dealer network, but if you have diffi culty getting the advice or assistance you require, do not hesitate to contact us directly.

Technical Support

For information and technical support questions please visit www.rodemic.com/support
*subject to terms & conditions – see rodemic.com/warranty for full details

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>