CHAUVET DJ JAM Pack Silver Moonflower Projection Light User Manual
- June 13, 2024
- Chauvet DJ
Table of Contents
- CHAUVET DJ JAM Pack Silver Moonflower Projection Light
- What Is Included
- Unpacking Instructions
- Symbols
- Product at a Glance
- INTRODUCTION
- Dimensions
- SETUP
- OPERATION
- Infrared Remote Control
- MAINTENANCE
- TECHNICAL SPECIFICATIONS
- FAQs
- Video- Instruction
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CHAUVET DJ JAM Pack Silver Moonflower Projection Light
What Is Included
- Moonflower
- Three-Color Wash Effect light
- UV Strobe Combo
- IRC-6 Remote Control
- 3 External Power Supply Units
- Warranty Card
- Quick Reference Guide
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.
Claims
- If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet.
- Failure to report damage to the carrier immediately may invalidate your claim.
- In addition, keep the box and contents for inspection.
- For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
| Convention | Meaning |
|---|---|
| 1—512 | A range of values |
| 50/60 | A set of values of which only one can be chosen |
| Settings | A menu option not to be modified |
| Menu > Settings | A sequence of menu options to be followed |
| < ENTER> | A key to be pressed on the product’s control panel |
| ON | A value to be entered or selected |
Symbols
| Symbol | Meaning |
|---|---|
| Critical installation, configuration, or operation information. Not |
following these instructions may make the product not work, cause damage to
the product, or cause harm to the operator.
| Important installation or configuration information. The product may not
function correctly if this information is not used.
|
Useful information.
Disclaimer
The information and specifications contained in this document are subject to change without notice. Chauvet assumes no responsibility or liability for any errors or omissions that may appear in this manual. Chauvet reserves the right to update the existing document or to create a new document to correct any errors or omissions. You can download the latest version of this document from www.chauvetlighting.com. © Copyright 2015 Chauvet. All rights reserved. Electronically published by Chauvet in the United States of America.
| Author | Date | Editor | Updated |
|---|---|---|---|
| R. Isenstadt | 02/16/15 | A. Leon | 02/17/15 |
Product at a Glance
Safety Notes
-
Always connect the product to a grounded circuit to avoid the risk of electrocution.
-
Always disconnect the product from the power source before cleaning.
-
Avoid direct eye exposure to the light source while the product is on.
-
Make sure the power cord is not crimped or damaged.
-
Never disconnect the product from power cord by pulling or tugging on the cord.
-
If mounting the product overhead, always secure to a fastening device using a safety cable.
-
Make sure there are no flammable materials close to the product when operating.
-
Do not touch the product’s housing when operating because it may be very hot.
-
The product is not intended for permanent installation.
-
Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated on the decal or rear panel of the product.
-
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
-
Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
Be sure that no ventilation slots on the product’s housing are blocked. -
Never connect the product to a dimmer or rheostat.
-
Make sure to replace the fuse with another of the same type and rating.
-
Never carry the product from the power cord or any moving part. Always use the hanging/mounting bracket.
-
The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures.
-
In the event of a serious operating problem, stop using the product immediately.
-
Never try to repair the product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.
-
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
INTRODUCTION
Overviews
Dimensions
SETUP
AC Power
- The JAM Pack™ Silver products have an external auto-ranging power supply that can work with an input voltage range of 100 to 240 VAC, 50/60 Hz.
- To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the power supply’s back panel, or refer to the product’s specifications chart.
- The listed current rating indicates the product’s average current draw under normal conditions.
- Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
- Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Mounting
Before mounting the product, read and follow the safety recommendations
indicated in the Safety Notes.
Orientation
The Products in the JAM Pack™ Silver may be mounted in any position; however,
make sure adequate ventilation is provided around the product.
Rigging
- Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming purposes.
- Make sure that the structure onto which you are mounting the product can support the product’s weight. See the Technical Specifications for weight information.
- When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
- When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
- The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle.
- Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
OPERATION
UV Strobe Control Panel Operation
| Button | Function |
|---|---|
| < STROBE MODE> | Cycles through strobe modes |
| < UV ON/OFF> | Turns the UV blacklight on or off |
UV Strobe Combo Strobe Modes
| Function | LED Status |
|---|---|
| Off | Static On |
Strobe Modes
| Very Slow (0.5–1 Hz)| ****
Blinks to the speed of the strobe
Slow (1–5 Hz)
Medium (5–10 Hz)
Fast (10–20 Hz)
Very Fast (20–30 Hz)
Static On| Static On
Sound-Active Mode| Static On
Strobe Mode
- Pressing
changes the UV Strobe Combo to the next mode. - For example, if the UV Strobe Combo is set to Static On mode, and
is pressed once, the mode will be set to Sound-Active mode. - To cycle through modes on the UV Strobe Combo, press
repeatedly until the desired mode is set.
UV On/Off
- The UV LEDs on the UV Strobe Combo are controlled separately from the white strobe LEDs.
- If the UV LEDs are On, press <UV ON/OFF> to turn them Off.
- If the UV LEDs are Off, press <UV ON/OFF> to turn them On.
Infrared Remote Control
The JAM Pack™ Silver products are compatible with the IRC-6 infrared remote control from Chauvet. The Moonflower and Three-Color Wash Effect light are always in IR mode. For the UV Strobe Combo, IRC mode will activate at the press of any button on the remote.
IRC-6 Operation
Be sure the IRC-6 remote is pointing directly at the product and there is
nothing in between the remote and the product. The following buttons function
with the JAM Pack™ Silver products:
-
– Turns LEDs on/off -
– Selects Sound-Active mode -
– Start/Stop strobing -
– Static red -
– Static green - – Static blue
-
– Turns the UV on/off for UV strobe -
– Turns white on/off for UV strobe -
– Selects Auto mode (<0> through <9>) * <0> – Red/Green/Blue * <1> – Red * <2> – Red/Green * <3> – Red/Green * <4> – Green * <5> – Green/Blue * <6> – Blue * <7> – Red/Blue * <8> – Red/Blue * <9> – Red/Green - <+> – Increases Strobe speed
- <-> – Decreases Strobe speed
- All other buttons on the remote have no function with these products
MAINTENANCE
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean your lighting products at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency. To clean the product, follow the instructions below:
- Unplug the product from power.
- Wait until the product is at room temperature.
- Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
- Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
- Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
- Softly drag any dirt or grime to the outside of the transparent surface.
- Gently polish the transparent surfaces until they are free of haze and lint.
TECHNICAL SPECIFICATIONS
Dimensions and
Weight
| | | | | |
---|---|---|---|---|---|---
| Length| Width| | Height| | Weight
Moonflower| 6.9 in (175 mm)| 5.8 in (146 mm)| 6.3 in (160 mm)| | 1.6 lb
(0.7 kg)
Wash Effect| 7.5 in (190 mm)| 2.4 in (61 mm)| 4.3 in (108 mm)| | 1.0 lb
(0.4 kg)
UV Strobe| 21.2 in (537 mm)| 1.6 in (40 mm)| 2.2 in (55 mm)| | 0.6 lb
(0.3 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power| Value| | All Products| External Power Supply
| Input Voltage| | Fixed| | | Switching
| Range| | 12 VDC, 1 A| 100–240 VAC, 50/60 Hz
| Voltage Selection| | Fixed| | Auto-Ranging
| Parameter| Moonflower| Wash Effect| UV Strobe
| Consumption (120 V)| | 6 W| 5 W| | 12 W
| Operating Current (120 V)| 0.113 A| 0.08 A| | 0.18 A
| Consumption (230 V)| | 5 W| 4 W| | 12 W
| Operating Current (230 V)| 0.062 A| 0.05 A| | 0.10 A
| Fuse| | N/A| N/A| | N/A
| Power I/O| | U.S./Worldwide| |
| Power input connector| | IEC| | |
| Power output connector| | Edison| | |
| Power Cord plug| | Edison (U.S.)| |
Light Source| Type| | Power| | | Lifespan
Moonflower| LED| | 6 W| | 50,000 hours
Wash-Effect| LED| | 1 W| | 50,000 hours
UV Strobe| LED (W)| | 0.6 W| | 50,000 hours
| LED (UV)| | 1.05 W| | 50,000 hours
| Color| | Quantity| | Current
Moonflower| Tri-color RGB| | 1| | | 2 A
Wash-Effect| Red| | 1| | | 1 A
| Green| | 1| | | 1 A
| Blue| | 1| | | 1 A
UV Strobe| W| | 4| | | 0.19 A
| UV| | 5| | | 0.31 A
Photometrics| Parameter| Moonflower| Wash-Effect| UV
Strobe
| Strobe Rate| 0 to 16 Hz| 0 to 16 Hz| | 0 to 30 Hz
Thermal| Maximum External Temp.| Cooling System| |
| 104 °F (40 °C)| | Convection| |
Ordering| Product Name| | Item Code| UPC Number
| JAM Pack™ Silver| | 10050955| 781462213039
To return a product or request support:
- In the U.S., contact Chauvet World Headquarters (See Contact Us).
- In the UK or Ireland, contact Chauvet Europe Ltd. (See Contact Us).
- In Mexico, contact Chauvet Mexico. (See Contact Us).
- In any other country, DO NOT contact Chauvet. Instead, contact your lighting distributor. See www.chauvetlighting.com for distributors outside the U.S., UK, Mexico, or Ireland.
- Outside the U.S., UK, Mexico, or Ireland, contact your distributor and follow their instructions on how to return Chauvet products to them. Visit our website for contact details.
Returns
- Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization (RMA) number before shipping the product.
- Be prepared to provide the model number, serial number, and a brief description of the cause for the return.
- You must send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet will not issue call tags.
- Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA number.
- Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.
Before sending the product, clearly write the following information on a piece of paper and place it inside the box:
- Your name
- Your address
- Your phone number
- RMA number
- A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double- boxing are recommended.
CONTACT US
WORLD HEADQUARTERS – Chauvet
- General Information
- Address: 5200 NW 108th Avenue
- Sunrise, FL 33351
- Voice: 954-577-4455
- Fax: 954-929-5560
- Toll free: 800-762-1084
- Technical Support
- Voice: 954-577-4455 (Press 4)
- Fax: 954-756-8015
- Email: tech@chauvetlighting.com
FAQs
What is the CHAUVET DJ JAM Pack Silver Moonflower Projection Light?
The CHAUVET DJ JAM Pack Silver Moonflower Projection Light is a dynamic and versatile lighting effect designed to create stunning visual displays and atmospheres in various entertainment settings.
What type of lighting effect does it produce?
This lighting fixture produces a mesmerizing moonflower projection with rotating beams and colorful patterns, adding excitement to your event or venue.
Is it suitable for both professional and home use?
Yes, it is suitable for both professional DJ setups and home entertainment systems, offering a wide range of lighting possibilities.
What are the key features of the CHAUVET DJ JAM Pack Silver Moonflower Projection Light?
Some key features include sound-activated programs, automated programs, multiple colors, and a compact and lightweight design for easy setup and transportation.
How does it respond to music and sound?
The light has sound-activated programs that sync with the beat of the music, creating dynamic and rhythmic lighting effects.
Can I use it with other lighting equipment?
Yes, it can be used in conjunction with other lighting fixtures and equipment to create more elaborate and synchronized lighting displays.
What colors can it project?
This light fixture can project a variety of colors, adding vibrancy and diversity to your lighting setup.
How do I control the CHAUVET DJ JAM Pack Silver Moonflower Projection Light?
You can control the light using the included wireless remote control for convenient and hassle-free operation.
Is it easy to install and set up?
Yes, it is designed for easy installation and setup, making it accessible for users of all experience levels.
What kind of venues or events is it suitable for?
It is suitable for a wide range of venues and events, including parties, clubs, weddings, and live performances, enhancing the visual experience.
Does it come with mounting options?
Yes, the CHAUVET DJ JAM Pack Silver Moonflower Projection Light includes a bracket for mounting on a truss or stand.
What is the power source for this lighting fixture?
It operates on standard AC power and includes a power cord for easy connectivity.
Can I create custom lighting sequences?
While it offers pre-programmed sequences, it may not support custom programming. Please refer to the user manual for details.
Is there a warranty included?
CHAUVET DJ products typically come with a manufacturer's warranty. Check the product documentation for warranty details.
Is it suitable for outdoor use?
This lighting fixture is primarily designed for indoor use and may not be suitable for outdoor environments.
Where can I find additional information about this product?
You can find additional information, user manuals, and technical specifications on the CHAUVET DJ website or by contacting their customer support.
Video- Instruction
Download This Manual PDF:CHAUVET DJ JAM Pack Silver Moonflower Projection Light User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>