Cas ta Wireless 0301978 Outdoor Smart Plug User Guide

Cas ta Wireless 0301978 Outdoor Smart Plug User Guide

Installing your outdoor smart plug

Power: 120 V~ 50/60 Hz
Load: Up to 15 A lighting loads, up to 1/2 HP motor loads, or up to 1200 VA (8 A) lighting transformer/magnetic ballast loads.
RF Operating Range: Guaranteed to work up to 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls (longer ranges are possible depending on conditions).
Install in accordance with all national and local electrical codes.

Double your warranty

Register your outdoor smart plug at www.casetawireless.com/register

For warranty information, please visit www.casetawireless.com/warranty

Contents supplied

Outdoor Smart Plug (PD-15OUT-BL)

FCC/IC Information

This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Modifications not expressly approved by Lutron Electronics Co., Inc. could void the user’s authority to operate this equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Plug in the device

WARNING: ELECTRIC SHOCK HAZARD.
May result in Serious Injury or Death. This device must be plugged into a GFCI protected circuit

Ensure the end of the cord is at least 3 in (76.2 mm) above the ground when plugged in.
Optional: Mount the plug using appropriate screws (not supplied).

The Lutron logo, Lutron, Caséta, and Pico are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries.

Apple is a trademark of Apple Inc., registered in the U.S. and other countries. AppStore is a service mark of Apple Inc.

All other product names, logos, and brands are property of their respective owners.

Add a wireless control if desired

Connect to a Caséta System

For advanced features like scheduling, geo-fencing, and control by voice or phone (Smart Bridge required, sold separately)

Lutron Smart Bridge

1. **Download the Lutron App
   
   

**www.casetawireless.com/LutronApp

2. Launch the Lutron App

3. . Press the Gear Icon
   
   

4. Press Add Device
   
   

5. Press the Outdoor Smart Plug Icon
   
   

Plug in the load and operate

Do not exceed the rating of the outdoor smart plug. Ensure any extension cords are rated for at least 15 A.

Pairing with a Pico Remote Control

For wireless control from anywhere in your home (Pico remote control required, sold separately)

1. 
   

2. PJ2-2B-GWH-L01
   
   Repeat steps to pair additional Pico remote controls.

3. A Pico remote control may also be paired via the Lutron app (Smart Bridge required).

Resetting the outdoor smart plug to its factory settings

Note: Returning an outdoor smart plug to its factory settings will remove it from the Caséta system and unpair it from a Pico remote control.

Note: Unplug all loads from the outdoor smart plug prior to returning to factory settings

1. Triple tap the On/Off button on the outdoor smart plug. DO NOT release the button after the third tap.

2. Keep the On/Off button pressed for approximately
   3 seconds until the button flashes quickly.

3. Release the On/Off button and immediately triple tap it again. This time release the button after the third tap. The button will flash slowly.

The outdoor smart plug has now been returned to its factory settings.

Troubleshooting

• Light bulb(s) is /are burned out or load does not work.
• Outlet is switched off.
• GFCI is tripped.

Load / light does not respond to Pico remote control.|

• The outdoor smart plug failed to pair with Pico remote control. See Step 2.
• The Pico remote control is outside the RF operating range.

 |

• The Pico remote control battery is low or installed incorrectly.

 |

• The Pico remote control battery is installed incorrectly.

Load/light does not respond to the Caséta system.|

• The outdoor smart plug was not properly added to the Caséta system. See Step 2.
• The outdoor smart plug is outside the RF operating range.

References

• casetawireless.com/register
• casetawireless.com/warranty
• Lutron Support Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>