VEVOR HX-50B Battery Cable Lug Crimping Tool User Manual
- June 13, 2024
- VEVOR
Table of Contents
Technical Support and E-Warranty
Certificatewww.vevor.com/support
HEAVY-DUTY CABLE CRIMPER
USER MANUAL
HX-50B Battery Cable Lug Crimping Tool
HEAVY-DUTY CABLE CRIMPER
HX-50B
LK-60A
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
[email protected]
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
**** WARNING!
- Before using this product, please disconnect the power supply first.
- Inspect before every use; do not use if damaged.
- Keep away from children.
- Before using this product, please understand the crimping specifications of cables and terminals.
- When using this product, pay attention to keep the jaws clean.
- Do not use this product for cables and terminals beyond its crimping range.
- When using this product, do not put your fingers or other objects into the jaws to avoid injury.
Product description
This product is a high-quality heavy-duty cable crimper with adjustable jaws. The pliers apply enough pressure to the wire and crimp terminal to bond the two together. In addition, this product is also equipped with a pair of wire cutters for cutting wires and cables. When using it, you need to pay attention to safety warnings, wear personal protective equipment, and follow the correct use method.
Product Info
| Heavy-Duty Cable Crimper
---|---
1| Model| HX-50B+LK-60A| HX-50B
2| G.W.| 2.55 kg| 1.92kg
3| Package Size| 425x155x65mm| 425)(135x65mm
4| crimp range| 6-50mH
5| 6 kinds of jaws| 6mm²-, 10mm²- , 16mm²- , 25mm²- , 35mm²-,, 50mm².
6| accessories| 1.cutting plier x1
2.gloves x1 pair
3.copper Connector Terminals x 95pcs
4.heat shrink tubex95pcs| 1 gloves x1 pair
2. AL Connector Terminals x6Opcs
Product structure
4.1 Cables crimping pliers are mainly below parts:
- Crimping block: used to compress and fix the cable.
- Spring: used to adjust the crimping block
- Anti-skid handle: Used to operate the manual wire rope crimping pliers.
4.2 The cutting pliers are mainly composed of the following parts:
Cutting mouth: used to cut wire rope.
Handle: Used to operate the cutter.
User Guide
5.1 Before using this product, please prepare the following tools:
Personal protective equipment such as protective gloves and goggles.
Cables or terminals that require crimping.
Lubricant and a clean cloth.
5.2 The method of use is as follows:
- Select the jaw size that needs to be crimped, and rotate the left and right jaws to the corresponding position.
- Put the cable or terminal to be crimped into the jaw and align it with the gear of the jaw.
- Firmly press the handle down until the jaws are fully closed.
- Keep the handle in compression until the crimping is complete.
- Release the handle and take out the crimped cable or terminal.
5.3 Jaw adjustment method:
The jaws of this cable crimper are adjustable. When in use, press down the
spring on the clamp head, rotate the left and right jaws to the jaws that need
to be crimped at the same time, and then release the spring to fix the jaws.
Repair and maintenance:
- This product has tightly fitted components. Do not dismantle the components.
- Avoid knocking the tool and keep it away from moisture.
- After repeated use of this tool for some time, check the quantity of oil in the reservoir inside the hand tool.
- Use ##20 oil for refill. Refilled oils shall be cleared of dust and grit.
- unload the fixed handle, pull out the rear oil plug from the oil reservoir and add ##20 mechanical oil filtered through 200- filter screen until oil overflows.
- Loosen the oil valve, turn the movable handle slowly for several times to release trapped air in the oil reservoir. Replace the oil plug and screw down the fixes handle.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho
Cucamonga, CA 91730
SHUNSHUN GmbH
ROmeracker 912021,76351
Linkenheim-Hochstetten, Germany
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
Made In China
Technical Support and E-Warranty Certificate
www.vevor.com/support