TESLA WF71261MGR Washing Machine User Manual

TESLA WF71261MGR Washing Machine

Product Information

Product Name : Washing Machine WF71261MGR

Product Description:

• Water supply hose
• Detergent dispenser
• Top cover
• Control panel
• Power supply cord
• Drum
• Door
• Drain hose
• Service flap
• Accessories: 4 x Cover caps, 1 x Supply hose cold water, Owner’s manual

Usage Instructions

Installation Unpacking the washing machine:

1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing. Make sure to remove the small triangle foam with the bottom one together. If not, lay the unit down with side surface, then remove the small foam from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.

Remove transport bolts:

1. Loosen the 4 transport bolts with a spanner.
2. Remove the bolts including the rubber parts and keep them for future use.
3. Close the holes using transport hole plugs.

Levelling the washing machine:

1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady.
4. Connect the water supply hose to the water inlet valve and a water tap with cold water as indicated.

Drain Hose:
There are two ways to place the end of drain hose:

1. Put it into the water trough.
2. Connect it to the branch drain pipe of the trough.

Operations
Quick Start:

1. Before Washing:
   • Plug in the washing machine.
   • Open the tap for water supply.
   • Load the clothes.
   • Close the door.
   • Add detergent and softener if needed.
2. Washing:
   • Select the desired washing program.
   • Select additional functions if necessary or use default settings.
   • Start the washing machine.
3. After Washing:
   The door lock and the [Start / Pause] lights flash with the buzzer beeping or two small points flash on the digital screen.

Before Each Washing:

• Check the label on clothing items for washing instructions.
• Take out any items from pockets.

Product images are for illustrative purposes only and may differ from the actual product.

SAFETY INSTRUCTIONS
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life.

Explanation of the symbols:

• WARNING!
  This combination of symbol and signal word indicates a potentially dangerous situation which may result in death or serious injuries unless it’s avoided.

• CAUTION!
  This combination of symbol and signal word indicates a potentially dangerous situation which may result in slight or minor injuries or damage to property and the environment.

• NOTE
  This combination of symbol and signal word indicates a potentially dangerous situation which may result in slight or minor injuries.

WARNING!
The electric shock!

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
• Before any maintenance the device, unplug the appliance from the mains.
• Always unplug the machine and turn off the water supply after use. The max. inlet water pressure, in pascals. The min. inlet water pressure, in pascals.
• To ensure your safety, power plug must be inserted into an earthed three-pole socket. Check carefully and make sure that your socket is properly and reliably earthed.
• Make sure that the water and electrical devices must be connected by a qualified technician in accordance with the manufacturer’s instructions and local safety regulations.

Risk to children!

• countries: the appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Children of less than 3years should be supervised to ensure that they do not play with appliance.
• Animals and children may climb into the machine. Check the machine before every operation.
• Kids should be supervised that they do not play with the appliance.
• Glass door may be very hot during the operation. Keep kids and pets far away from the machine during the operation very wet rooms as well as in the rooms with explosive or caustic gas.
• Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result.
• Plug must be accessible after installation.

INSTALLATION LOCATION AND SURROUNDING

• All washing and additional substances are to be kept in a safe place out of the reach of children.
• Do not install the machine on a carpet floor. The obstruction of the openings by a carpet can damage the machine.
• Keep the appliance clear from heating sources and direct sunlight to avoid plastic and rubber parts to corrode.
• Do not use the appliance in humid environments or rooms containing explosive or caustic gas. In case of water leakage or water splashes let the appliance dry in the open air.
• The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the washing machine.
• Do not operate the machine in rooms with a temperature of below 5°C. This can cause damages to parts of it. If it is unavoidable, make sure to drain the water completely from the appliance after every use (see „Maintenance – Cleaning of drain pump filter“) to avoid damages caused by frost.
• Never use flammable sprays or substances in the immediate proximity of the appliance.

INSTALLATION

• Remove all packaging material and transport bolts before using the appliance. Otherwise, serious damage may result.
• This appliance is equipped with a single inlet valve and can be connected to the cold water supply only.
• Mains plug must be accessible after installation.
• Before washing clothes for the first time, the product shall be operated once throughout all the procedures without any clothes inside.
• Before using the washing machine, the product shall be calibrated.
• Do not put any excessively heavy objects on the appliance, like water containers or heating devices.
• The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
• Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05 MPa.

ELECTRICAL CONNECTION

• Make sure the supply cable is not trapped by the machine, it can get damaged.
• Connect the product to a grounded outlet protected by a fuse complying with the values in the “ Technical specifications“ table. The grounding installation has to be made by a qualified electrician.
• Ensure that the machine is installed in accordance with the local regulations.
• Water and electrical connections must be carried out by a qualified technician in accordance with the manufacturer‘s instructions and local safety regulations.

WARNING!

• Don´t use multiple plugs or extension cords.
• The appliance must not have an external switching device such as a timer or connected to a circuit that is regularly switched on and off.
• Do not pull the plug out of the mains outlet if there is flammable gas around.
• Never pull out power plug with wet hands.
• Always pull at the plug, not at the cable.
• Always unplug the appliance if it is not being used.

WATER CONNECTIONS

• Check the connections of the water inlet tubes, the water tap and the outlet hose for possible problems due to changes of water pressure. If the connections loosen or leak close the water tap and get it repaired. Do not use the appliance before the pipes and hoses are installed properly by qualified persons.
• Glass door may become very hot during the operation. Keep children and pets far away from the machine while it is operating.
• The water inlet and outlet hoses have to be safely installed and remain undamaged. Otherwise, water leakage can occur.
• Do not remove the drain pump filter while there is still water in the appliance. Big quantities of water can leak out, and there is a risk of scalding due to hot water.

OPERATION AND MAINTENANCE

• Never use any flammable, explosive or toxic solvents. Do not use gasoline and alcohol etc. as detergents. Only select detergents that are suitable for machine washing.
• Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails, screws, stones etc. may cause serious damages to this machine.
• Remove all objects from pockets such as lighters and matches before use the appliance.
• Thoroughly rinse items that have been washed by hand.
• Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, wax and wax removers should be washed in hot with an extra amount of detergent before being dried in the appliance.
• Items containing foam rubber (latex foam), shower caps, water proof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the machine.
• Fabric softeners or similar products should be used as recommended in their instructions.
• Never try to open the door forcefully. The door will unlock shortly after the end of a cycle.
• Please do not close the door with excessive force. If it is found difficult to close the door, please check if the clothes are properly inserted and distributed.
• Always unplug the appliance and close the water tap before cleaning and maintenance and after each use.
• Never pour water over the appliance for cleaning purpose. Risk of electric shock!
• Repairs shall only be carried out by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The producer will not be responsible for damages caused by the intervention of not authorized persons.

TRANSPORT

• Before Transport:
  • Bolts shall be reinstalled to the machine by a specialized person
  • Accumulated water shall be drained out of the machine
• This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door cannot be used as a handle.

INTENDED USE
The product is intended only for home use and for textiles in household amounts suitable for machine washing and drying. This appliance is for indoor use only and not intended for built in use. Only use according to these instructions. The appliance is not intended for commercial use. Any other use is considered as improper use. The producer is not responsible for any damage or injuries that may result of it.

• This appliance is intended to be used in household and similar applications such as:
  • Staff kitchen areas in shops, offices and other working environments;
  • Farm houses;
  • By clients in hotels, motels and other residential type environments;
  • Bed and breakfast type environments;
  • Areas for communal use in blocks of flats or in launderettes.

Packaging/Old appliance
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the collection systems or contact the retailer where the product was purchased. They return and can take this

INSTALLATION

Product Description

NOTE: The product line chart is for reference only, please refer to real product as standard.

Accessories

Installation area

WARNING!

• Stability is important to prevent the product from wandering!
• Make sure that the product should not stand on the power cord.

Before installing the machine, the location characterized as follows shall be selected:

1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature is above 0 °C
5. Keep far away from the heat resources such as coal or gas.

Unpacking the washing machine

WARNING!

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
• There is a risk of suffocation! Keep all packaging well away from children.
  1. Remove the cardboard box and styrofoam packing.
  2. Lift the washing machine and remove the base packing. Make sure the small triangle foam is removed with the bottom one together. If not, lay the unit down with side surface, then remove the small foam from the unit bottom manually.
  3. Remove the tape securing the power supply cord and drain hose.
  4. Remove the inlet hose from the drum.

Remove transport bolts

WARNING!

• You must remove the transport bolts from the backside before using the product.

Please take the following steps to remove the bolts:

1. Loosen the 4 transport bolts with a spanner
2. Remove the bolts including the rubber parts and keep them for future use.
3. Close the holes using transport hole plugs
   

Levelling the washing machine

WARNING!

• The lock nuts on all four feet must be screwed tightly against the housing.
  1. Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions tighten the nuts.
  2. Loosen the lock nut turn the feet until it closely contacts with the floor.
  3. Adjust the legs and lock them with a spanner, make sure the machine is steady.

Connect Water Supply Hose

WARNING!

• To prevent leakage or water damage, follow the instructions in this chapter!
• Do not kink, crush, modify or sever water inlet hose.

Connect the water supply hose to the water inlet valve and a water tap with cold water as indicated.

NOTE

• Connect manually, do not use tools. Check if the connections are tight.
• Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.

Drain Hose

WARNING!

• Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.

There are two ways to place the end of drain hose:

1. Put it into the water trough.
2. Connect it to the branch drain pipe of the trough.
   

OPERATIONS

Quick Start

CAUTION!

• Before washing, please make sure it’s installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any residual water and to neutralize potential odors, it’s recommended to clean your appliance before first use. For this reason, start the Cotton program at 90°C without laundry and detergent.

Before Washing

NOTE
Detergent need to be added in “case I“ after selecting pre-washing for machines with this function.

Washing

After Washing

The door lock and the [Start / Pause ] lights flash with the buzzer beeping or two small points flash on the digital screen.

Before Each Washing

• The working condition of the washer should be (5-40) °C. If used under 0 °C, the inlet valve and draining system may be damaged. If the machine is placed under condition of 0 °C or less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use.
• Please check the labels and the explanation of using detergent before wash. Use non-foaming or
  less-foaming detergent suitable for machine washing properly.

• Check the label

• Take out the items out of the pockets

• Knot the long strips, zip or button

• Put small clothes into the pillow slip

• Turn easy-pilling and long-pile fabric inside out

• Separate clothes with different textures

WARNING!

• When washing a single clothes, it may easily cause great eccentricity and give alarm due to great unbalance. Therefore it is suggested to add one or two more clothes to be washed together so that draining can be done smoothly.
• Don’t wash clothes that have been in touch with kerosene, gasoline, alcohol and other flammable materials.

Detergent Dispenser

• Prewash detergent
• Main wash detergent
• Softener
• Release button to pull out the dispenser

CAUTION!
Detergent only need to be added in “case I“ after selecting pre-washing for machines with this function.

Program|
---|---
Cotton 30 °C|
Cotton 40 °C|
Cotton 60 °C|
Cotton 90 °C|
Synthetic|
Synthetic 40 °C|
Drum Clean|
Cotton Intensive 40 °C|
Cotton Intensive 60 °C|
Quick Wash 45′|
Quick Wash 30′|
Quick Wash 15′|
Program|
---|---
Spin Only|
Drain Only|
Rinse & Spin|
Delicate 30 °C|
Delicate|
Mix 60 °C|
Mix 40 °C|
Mix|
ECO 40-60|
Cold Wash|
Cold Wash 20°C|

Means must Means optional

Detergent Recommendation

Recommended washing detergent| Wash cycles| Washing temp.| Type of laundry and textile
---|---|---|---
Heavy-duty detergent with bleaching agents and optical brighteners| Cotton ECO 40-60, Mix| 30/40/60| White laundry made from boil- proof cotton or linen
Colour detergent without bleaching agent and optical brighteners| Cotton ECO 40-60 Mix Cold Wash| Cold/20/30/40| Coloured laundry made from cotton or linen
Color or mild detergent without optical brighteners| Cold Wash Synthetic|

Cold/20/40

| Coloured laundry made from easy care fibres or synetheic materials
Mild washing detergent| Synthetic| Cold/40| Delicate textiles, silk, viscose

NOTE

• Agglomerating or ropy detergent or additive can be diluted in some water before pouring it into the detergent dispenser, to avoid its inlet to get blocked and thus cause a water overflow.
• Please choose the suitable type of detergent to get a maximum of washing performance and a minimum of water and energy consumption
• To achieve the best cleaning result a proper detergent dosing is important.
• Use a reduced detergent amount if the drum is not filled completely.
• Always adjust the amount of detergent to the water hardness, if your tap water is soft, use less detergent.
• Dose according to how dirty your laundry is, less dirty clothes require less detergent.
• Highly concentrated (compact detergent) requires particularly accurate dosing.

Following symptoms are a sign of detergent overdosing:

• heavy foam formation
• poor washing and rinsing result

Following symptoms are a sign of detergent under dosing:

• laundry turns grey
• built-up of limescale deposits on the drum, the heating element and/or the laundry

Control Panel
NOTE
The chart is for reference only, please refer to real product as standard.

1. On/Off
   Product is switched on or off.

2. Start/Pause
   Press the button to start or pause the washing cycle.

3. Option
   This allows you to select an additional function and will light when selected.

4. Program
   Available according to the laundry type.

5. Display
   The display shows the settings, estimated time remaining, options, and status messages for your washer. The display will remain on through the cycle.

Option

• Prewash
  The Prewash function can get an extra wash before main wash, it is suitable for washing the dust off the surface of the clothes; You need to put detergent into the Case (I) when selecting it.

• Extra Rinse
  The laundry will undergo extra rinse once after you select it.

• No Spin
  It will not spin if you choose this function.

Programmes

NOTE: The parameters in this table are only for user’s reference. The actual parameters may be different with the parameters in above mentioned table.

Cycle| Nominal capacity in kg| Cycle duration in h:min| Energy consumption in KWh/cycle| Water consumption in L/cycie| Highest washing temperature °C 1)| Residual moisture in % / Spin speed in rpm 2)
---|---|---|---|---|---|---
Cold Wash 20’C| 3.5| 1:01| 0.213| 41| 20| 60%/1200
Cotton 60’C| 7.0| 2:45| 1.385| 65| 60| 60%/1200
Synthetic| 3.5| 2:20| 0.327| 60| Cold| 60%/1200
Quick Wash 15′| 2.0| 0:15| 0.035| 34| Cold| 75%/800
Cotton Intensive 40°C| 7.0| 3:48| 1.088| 65| 40| 60%/1200
ECO 40-603′| 7.0| 3:28| 0.940| 55.3| 39| 62%/1200
3.5| 2:42| 0.590| 41.5| 35| 62%/1200
2.0| 2:42| 0.435| 35.6| 30| 62%/1200

• The above data is for reference only, and the data may change due to different actual use conditions.
• The values given for programmes other than the ECO 40-60 programme are indicative only.

The new EU energy efficiency class is D

• Energy test program: ECO 40-60. Speed: the highest speed; Other as the default.
• Half load for 7.0Kg machine :3.5Kg.
• Quarter load for 7.0Kg machine :2.0Kg.

1. The highest temperature reached by the laundry in the wash cycle for at least 5 minutes.
2.  Residual moisture after the wash cycle in water content percent and the spin speed at which this was achieved.
3. The ECO 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle. This programme is used to assess the compliance with the regulation (EU) 2019/2023.

• The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration.
• Loading the household washing machine up to the capacity indicated for the respective programmes will contribute to energy and water savings.
• Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.

CAUTION!
If there is any break in the power supply while the machine is operating, a special memory stores the selected programme. The machine will continue the programme when the power supply is re-established.

Programs

Programs are available according to the laundry type.

Programs

• Synthetic

  • Wash synthetic articles, for example: shirts, coats, blending. While washing the knitting
    textiles, detergent quantity should be reduced due to its loose string construction and
    light forming bubbles.

• Delicate

  • For delicate, washable textiles, e.g. made of silk, satin, synth fibers or blended fabrics.

• Drum Clean

  • It applies 90 °C high temperature sterilization to make the clothes washing more green.
  • When this procedure is performed, the clothes or other washing cannot be added.
  • When proper amount of chlorine bleaching agent is put in the barrel cleaning effect will be better. The customer can use this program regularly according to the need.

• Spin Only

  • Extra spin with selectable spin speed.

• Rinse & Spin

  • Extra rinse with spin.

• Drain Only

  • Drain off the water.

• Quick Wash 15’

  • It is suitable for washing few and not very dirty clothes quickly.

• Cotton Intensive

  • To increase the washing effects, washing time is increased.

• ECO 40-60

  • Default 40°C,not selectable, suitabale for laundry washing at about 40°C-60°C.

• Cold Wash

  • Cold water to wash clothes.

• Cotton

  • Hard-wearing textiles, heat-resistant textiles made of cotton or linen.

• Mix

  • You can select this procedure wash the tough clothes, that need much more time and strength. It is used for the daily clothes made of cotton, such as sheets, chains, pillowcases bathrobe and underwear.

Option

Cycle| Default Temp. (°C)| Default spin **Additional Functions speed in rpm**
---|---|---
Synthetic| Cold| 1200| Delay, Extra Rinse
Synthetic 40 °C| 40| 1200| Delay, Extra Rinse
Cold Wash| Cold| 1200| Delay, Extra Rinse
Cold Wash 20 °C| 20| 1200| Delay, Extra Rinse
Cotton 30 °C| 30| 1200| Delay, Extra Rinse
Cotton 40 °C| 40| 1200| Delay, Extra Rinse
Cotton 60 °C| 60| 1200| Delay, Extra Rinse
Cotton 90 °C| 90| 1200| Delay, Extra Rinse
ECO 40-60| 60| 1200| Delay
Cotton Intensive 40°C| 40| 1200| Delay
Cotton Intensive 60°C| 60| 1200| Delay
Drum Clean| 90| 400| Delay
Spin Only| –| 1200| Delay
Drain Only| –| —| Delay
Rinse & Spin| –| 1200| Delay, Extra Rinse
Delicate 30 °C| 30| 600| Delay, Extra Rinse
Delicate| Cold| 600| Delay, Extra Rinse
Mix 60°C| 60| 1200| Delay, Extra Rinse
Mix 40°C| 40| 1200| Delay, Extra Rinse
Mix| Cold| 1200| Delay, Extra Rinse
Quick Wash 45’| 40| 800| Delay
Quick Wash 30’| 30| 800| Delay
Quick Wash 15’| Cold| 800| Delay

NOTE

• For the maximum spin speed, program time, and other details of the ECO 40-60 program, please refer to the content on the Product Fiche page.
• If an adjustment is not possible for a cycle, the table shows which cycle offers which options for adjustment.

Delay:

• Delay function can be set with this button, the delaying time is 0-24H.

Spin Speed:

• It can be set the spin speed to press the button repeatedly

Extra Rinse:
The laundry will undergo extra rinse once after you select it.

Speed

• The speed is:
• 1200: 0-400-600-800-1000-1200

Other Functions

To act the buzzer function, press the button again for 3 seconds. The setting will be kept until the next reset.

CAUTION!
After Muting the buzzer function, the sounds will not be activated any more.

Child Lock
To avoid mis operation by children.

CAUTION!
When child lock is activated and program starts, child lock indicator will switch on, and the CL and remaining time on the display are alternately displayed in 0.5s. Press the other buttons will make child lock indicator flash for 3s. when program finish, CL and END alternate for 10s in 0.5s, then the child lock lights flash for 3s.

• Only press and hold the two button can release child lock, even power off, switch off and program end
• The “Child Lock” will lock all buttons except Power button and Child Lock button please release child lock before selecting program and starting washing.

MAINTENANCES

Cleaning and Care

WARNING! Before your maintenance starts, please unplug the machine and close the tap.

Cleaning The Cabinet
Proper maintenance on the washing machine can extend working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there any water overflow, use the wet cloth to wipe it off immedi No sharp items are allowed.

NOTE Formic acid and its diluted solvents or equivalent are forbidden, such as alcohol, solvents or chemical products etc.
Cleaning The Drum
The rusts left inside the drum by the metal articles should be removed immediately with chlorine-free detergents. Never use steel wool.

NOTE: Don’t put laundry in the washing machine during the drum cleaning.

Cleaning The Door Seal and Glass
Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can cause leaks. Remove any coins, buttons and other objects from the seal after each wash. Clean the Door Seal and Glass every month to ensure the normal operation of the appliance.

Cleaning The Inlet Filter

Note: Inlet filter must be cleaned if there is less water.

1. Close the tap and remove the water supply hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the backside of the machine. Pull out the filter with long nose pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water inlet and reconnect the water supply hose.
6. Clean the Inlet filter every 3 months to ensure the normal operation of the appliance

Clean The Detergent Dispenser

1. Press down the release [ ] on the softener cover and pull the dispenser drawer out of the recess. Clean the inside of the recess with a brush.
2. Lift the softener cover off the dispenser drawer and wash both items with water.
3. Restore the softener cover and push the drawer back into the recess.

1. Press the release and remove the dispenser  drawer
2. Clean the dispenser drawer and the softener cover under water
3. Clean the recess with an soft brush
4. Insert the dispenser drawer

NOTE

• Do not use abrasive or caustic agents to clean plastic parts.
• Clean the detergent dispenser every 3 months to ensure the normal operation of the appliance.

Cleaning The Drain Pump Filter

WARNING!

• Make sure that the machine has finished the washing cycle and is empty. Switch it off and unplug it before cleaning the drain pump filter.
• Be careful of hot water. Allow the water to cool down. Risk of scalding!
• Clean the filter periodically every 3 months to ensure the normal operation of the appliance.

1. Open the lower cover cap
2. Open the filter by turning to the counter clockwise
3. Remove extraneous matter
4. Close the lower cover cap
   

CAUTION!

• When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.

Troubleshooting

The start of the appliance does not work or it stops during operation. First try to find a solution to the problem, If not, contact the service centre.

the door is closed Check if the clothes are stuck
Door can’t be opened| Washer’s safety protection design is working| Disconnect the power, restart the product
Water leakage| The connection between inlet pipe or outlet hose is not tighten| Check and fasten water pipes Clean up outlet hose
Detergent residues in the box| Detergent is dampened or agglomerated| Clean and wipe the detergent box
Indicator or display does| Disconnect the power| Check if the power is shut down and the
not light| PC board or harness has connection problem| power plug is connected correctly
Abnormal noise| | Check if the fixing (bolts) have been removed Check it’s installed on a solid and level floor

Error Codes

the clothes are stuck
E10| Water injecting problem while washing| Check if the water pressure is too low Straighten the water pipe Check if the inlet valve filter is blocked
E21| Overtime water draining| Check if the drain hose is blocked
E12| Water overflow| Restart the washer

EXX Please try the solutions again, if unsuccessful, please call our service line.

Customer service
Spare part for your appliance are available for a minimum of 10 years. In case of questions please contact our customer service at:

WARNING!
Risk of electric shock

• Never try repair an appliance which is defective of presumed to be defective.
• You may put your own and future users’ lives in danger.Only authorised specialists are allowed to carry out this repair work.
• Improper repair will void the warranty and subsequent damages can’t be recognized!

Transport
IMPORTANT STEPS WHEN MOVING THE APPLIANCE

• Unplug the appliance and close the water inlet tap.
• Check, if the door and the detergent dispenser are closed properly.
• Remove the water inlet pipe and the outlet hose from the house installations.
• Let the water drain completely from the appliance (see “Maintenance Cleaning the drain pump filter”)
• Important: Re-install the 4 transport bolts in the back of the appliance.
• This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door cannot be used as a handle.

NOTE: After the check, activate the appliance. If the problem occurs again, contact the service.

Technical Specifications

• Power Supply: 220-240V~,50Hz
• MAX. Current : 10A
• Standard Water Pressure: 0.05MPa~1MPa

Product Information Sheet
COMMISSION DELEGATED REGULATION (EU) 2019/2014 with regard to energy labelling of household washing machines and household washer-dryers

Supplier’s name or trade mark: Tesla
Supplier’s address: –
Model identifier: WF71261MGR
General product parameters:
Parameter| Value| Parameter| Value
Rated capacity(a) (kg)| 7,0| Dimensions in cm| Height| 85
Width| 60
Depth| 40
Energy    Efficiency Index(a) (EEIW)| 80,0| Energy efficiency class(a)| D
Washing efficiency

index(a)

| 1,040| Rinsing effectiveness (g/kg)(a)| 5,0
Energy consumption in kWh per cycle, based on the eco 40-60 programme at a com- bination of full and partial loads. Actual energy consumption will depend on how the appliance is used.| 0,690| Water consumption in liter per cycle, based on the eco 40-60 programme at a combination of full and partial loads. Actual water consumption will de- pend on how the appliance is used and on the hardness of the water.| 45
Maximum temperature inside the treated textile(a) (°C)| Rated capacity| 39| Weighted remaining moisture content(a) (%)| 62,0
Half| –
Quarter| –
Spin speed(a) (rpm)| Rated capacity| 1 200| Spin-drying efficiency class(a)| C
Half| –
Quarter| –
Programme duration(a) (h: min)| Rated capacity| 3:28| Type| Free-standing
Half| –
Quarter| –
Airborne acoustical noise emissions in the spinning phase(a) (dB(A) re 1 pW)| 80| Airborne acoustical noise emission class(a) (spinning phase)| C
Off-mode (W) (if applicable)| 0,50| Standby mode (W) (if applica- ble)| 1,00
---|---|---|---
Delay start (W) (if applicable)| N/A| Networked standby (W) (if ap- plicable)| N/A
Minimum duration of the guarantee offered by the supplier: 24 months
This product has been designed to release silver ions during the washing cycle| NO
Additional information:
Weblink to the supplier’s website, where the information in point 9 of Annex II to Commission Regulation (EU) 2019/2023 is found: tesla.info

(a) for the eco 40-60 programme.

Link to the EU EPREL database

• The QR code on the energy label supplied with the appliance provides a web link to the registration of this appliance in the EU EPREL database.
• Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
• It is possible to find information related to the performance of the product in the EU EPREL database using the link https://eprel.ec.europa.eu and the model name and product number that you can find on the rating plate of the appliance. For more detailed information about the energy label, visit www.theenergylabel.eu.

EU DECLARATION OF CONFORMITY
Manufacturer business name: Manufacturer address:

TESLA/COMTRADE DISTRIBUTION D.O.O. BEOGRAD BULEVAR ZORANA OINOICA 125i, 11000 BEOGRAD
WE, MANUFACTURER OF BELOW DESCRIBED PRODUCTS, HEREBY DECLARE UNDER OUR SOLE RESPONSIBILITY, THAT THE PRODUCTS TO WHICH THIS DECLARATION RELATES:

product description:

ARE IN CONFORMITY WITH THE FOLLOWING STANDARDS AND LEGISLATIVE ACTS:

EN62321-4:2014
EN62321-5:2014
EN62321-6:2015
EN62321-7-1:2015
EN62321-7-2:2017
EN62321-8:2017
EU60456/2016/FprAA:2020| Eco-design of Energy related Products (ErP)
| 2009/125/EC
| EU 2019/2014
| EU 2019/2023
| EU 2021/340
| EU 2021/341

Comtrade Distribution d.o.o. Beograd

• Ad d res,;: B ulevar Zorana 8’indiC.a 12Si 11000 Belgrade, Serbia
• Pho ne : . +381 1 l 201 55 55
• Email; distribution . rs@comlrade . com
• www.comlradedistribution .co n1

Documents / Resources

| TESLA WF71261MGR Washing Machine [pdf] User Manual
WF71261MGR Washing Machine, WF71261MGR, Washing Machine, Machine
---|---

References

• Tesla.info | Technology for all

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>