MESTEK IR01C Digital Infrared Thermometer Gun User Manual

MESTEK IR01C Digital Infrared Thermometer Gun

Safety notices

Before using the termodetector, please read the manual carefully.

• Do not use any solvent to clean the thermodetector.

• Safety symbols:
  Important information prompt for danger
  Complies with European CE safety specifications The instrument complies with the following standards:

• EN61326-1

• EN60825-1

Warning

Do not align the laser to human eyes or reflective surface

Notes

• When the ambient temperature changes suddenly, it is required to place the thermodetector in the environment for 30 minutes and measure when the internal and external temperatures of the thermodetector coincide.
• Try to avoid any electromagnetic field caused by electric welding and induction heating.
• Do not place the thermodetector close to or on a high-temperature object.
• Keep the thermodetector clean, and avoid dust from entering the tube.

Appearance description

1. Alarm indicator
2. Liquid crystal display
3. Laser control key/digital turn-down key
4. Mode key
5. Back-light/digital turn-up key
6. Infrared sensor induction zone
7. Laser indicator
8. Measurement trigger
9. Battery cover

Liquid crystal display description

1. Ambient temperature
2. Relative humidity
3. Surface temperature
4. Fahrenheit degree
5. Centigrade degree
6. Low voltage indication
7. Laser indication
8. Measurement indication
9. Low alarming
10. High alarming
11. Data hold
12. Radiance indication

Measurement methods

1. Set the upper limit of the instrument alarm: Press and hold the Mode key for 2 seconds, to enter the instrument setting, and press the MODE key to shift to the alarm upper limit setting, in this case, Hi is displayed in the instrument function indication zone, and the alarm upper limit value is displayed in the zone, the value blink. Press / the key to increase or decrease the alarm value, and long press the / key to accelerate the increase or decrease of the set value.

2. Set the low alarm value of the instrument Press and hold the Mode key for 2 seconds, to enter the instrument setting, and press the MODE key to shift to the alarm lower limit setting, in this case, Low is displayed in the instrument function indication zone, and the alarm lower limit value is displayed in the zone, the value blink. Press / key to increase or decrease the alarm value, and long press  / key to accelerate the increase or decrease of the set value.

3. Set the instrument radiance Press and hold the Mode key for 2 seconds, to enter the instrument setting, and press the MODE key to shift to the instrument radiance setting, in this case, the instrument radiance indication zone flashes. Press the / key to increase or decrease the radiation value, and long press the / key to accelerating the increase or decrease of the set value.

4. Set the instrument temperature unit Press and hold the MODE key for 2 seconds, to enter the instrument setting, and press the MODE key to shift to the instrument temperature measurement unit, the unit symbol on the display flashes, and press the / key to change the unit symbol.

5. Exit the setting
   Press the trigger or long-press the MODE key, to exit the instrument setting.

6. Turn on/off laser Press the Mode Button to turn on or off the Laser, and the instrument will display the laser symbol

7. Non-contact temperature measurement
   Aim the thermodetecto at the object, and hold the trigger, to conduct continuous measurement of temperature. After displaying stably, release the trigger, and the measurement result will be maintained.

When holding the trigger, the secondary display of the instrument will display the maximum value of the measured temperature.

When the measured value is greater than the upper limit of the high alarm or the measured value is less than the lower limit of the low alarm, the red alarm indicator will turn on to the alarm.

Target distance ratio (D:S ratio)

The thermodetector has a certain visual angle and visual field, as shown in the following figure.

In order to guarantee the measured object fills in the visual field of the thermodetector, which means the thermodetector only “sees” the measured object rather than other objects. Larger objects may cause larger temperature measurement distances; for smaller objects, the measurement distances must be close. The ratio of measurement distance to the measured target (D:S) is 12:1, as shown in the following figure:

Radiance

The radiance characterizes the ability of an object to radiate infrared rays. Larger radiance will lead to stronger radiation ability on the object’s surface.

The radiance of the majority of organic matter or metal-oxidized surfaces ranges between 0.85 and 0.98. The radiance of the thermodetector is 0.95 by default. During measurement, set the radiance of the instrument the same as the radiance of the measured object. During measurement, please pay attention to the impact of emissivity on measurement results. The following table is the radiance reference table.

Electrical          terminal

board

| 0.6
Hastelloy| 0.3~0.8
Ferro-nickel| Oxidized| 0.7~0.95
Abrasive blasting| 0.3~0.6
Electropolishing| 0.15
Iron| Oxidized| 0.5~0.9
Rust| 0.5~0.7
Iron (casting)| Oxidized| 0.6~0.95
Unoxidized| 0.2
Fusion cast| 0.2~0.3
Iron (casting) passivation| 0.9
Lead| Coarse| 0.4
Oxidized| 0.2~0.6
Molybdenum oxidation| 0.2~0.6
Nickel oxidation| 0.2~0.5
---|---
Platinum black| 0.9
Steel| Cold rolling| 0.7~0.9
| Grinding steel plate| 0.4~0.6
| Polished steel plate| 0.1
Zinc| Oxidized| 0.1
Asbestos| 0.95
Asphalt| 0.95
Basalt| 0.7
Carbon (unoxidized)| 0.8~0.9
Graphite| 0.7~0.8
Silicon carbide| 0.9
Ceramics| 0.95
Clay| 0.95
Concrete| 0.95
Cloth| 0.95
Glass plate| 0.85
Gravel| 0.95
Gravel| 0.95
---|---
Plaster| 0.8~0.95
Ice| 0.98
Limestone| 0.98
Paper| 0.95
Plastics| 0.95
Soil| 0.9~0.98
Water| 0.93
Timber| 0.9~0.95

Replacement of battery

When the battery is low, the battery symbol will light up, in this case, it is required to replace the battery. Open the battery cover with your hands, and replace it with a new l.5V*2AAA battery. Refer to the following figure :

Technical indexes

Response

spectrum

| 8~14um
---|---
Radiance| 0.10~1.00
Laser| <lmW /630-670nm Level 2
Response time| <0.SS
Automatic

shutdown

| 30 seconds
Service

temperature

| 0~40 degrees
Storage

temperature

| -l0°C~60°C
Power supply| 1.5Vx2 AAA battery
Measurement

range

| -50°C~550°C

(-58°F~1022°F)

(non-contact

temperature

| -50°C~0°C ±3°C/6°F

0~550°C ±(1.5% reading+ 2°C)

measurement)|
Ambient temperature| ±1.0°(/2 °F (from 0°( to 45°(/from 32°F toll3°F )

±l.5°C/3°F (from -10°C to 0°C, from 45°C to 60°C/14°F~32°F, 113°F~140

OF)

---|---
Ambient humidity| ±4.0% RH (from 20% to 80%)

± 5.0% RH (from 0% to 20%, from

80% to 100%)

FREQUENTLY ASKED QUESTIONS

What is a digital infrared thermometer gun?

A digital infrared thermometer gun is a handheld device used to measure temperature from a distance using infrared technology.

How does a digital infrared thermometer gun work?

The thermometer gun emits infrared radiation, which is then detected and converted into temperature readings by the device.

What are the advantages of using a digital infrared thermometer gun?

Digital infrared thermometer guns provide non-contact temperature measurement, quick results, and the ability to measure temperature in hard-to-reach or hazardous areas.

What are some common applications for digital infrared thermometer guns?

Digital infrared thermometer guns are commonly used in medical settings, food preparation, HVAC systems, automotive diagnostics, and industrial applications.

Can a digital infrared thermometer gun measure body temperature accurately?

Yes, some models are specifically designed for measuring human body temperature and can provide accurate readings when used correctly.

How close should I hold the thermometer gun to the object or person being measured?

The specific distance may vary depending on the model, but typically it is recommended to hold the thermometer gun within a few inches or centimeters from the target.

Can a digital infrared thermometer gun measure temperature in both Celsius and Fahrenheit?

Yes, most digital infrared thermometer guns offer the option to switch between Celsius and Fahrenheit temperature scales.

Can a digital infrared thermometer gun measure the temperature of moving objects?

Yes, digital infrared thermometer guns can measure the temperature of moving objects. However, it's important to consider factors such as emissivity and distance to ensure accurate readings.

Are digital infrared thermometer guns suitable for measuring surface temperatures only?

Yes, digital infrared thermometer guns are designed to measure the temperature of surfaces rather than internal temperatures.

Can a digital infrared thermometer gun measure the temperature of liquids?

Yes, digital infrared thermometer guns can measure the temperature of liquids. However, it's important to consider factors such as emissivity and the presence of steam or vapor.

Can a digital infrared thermometer gun measure temperature through glass or transparent surfaces?

No, digital infrared thermometer guns cannot accurately measure temperature through glass or transparent surfaces as they primarily detect surface temperatures.

Can a digital infrared thermometer gun be used in complete darkness?

Yes, digital infrared thermometer guns can measure temperature in darkness as they rely on the detection of infrared radiation rather than visible light.

Are digital infrared thermometer guns suitable for outdoor use?

Yes, digital infrared thermometer guns can be used outdoors. However, factors such as ambient temperature, wind, and direct sunlight may affect their accuracy.

Are digital infrared thermometer guns suitable for measuring body temperature during COVID-19?

Yes, digital infrared thermometer guns can be used to measure body temperature during COVID-19. However, it's important to follow guidelines and use them correctly for accurate readings.

Can a digital infrared thermometer gun be used for diagnosing medical conditions?

Digital infrared thermometer guns can provide indications of temperature variations, but they are not intended for diagnosing specific medical conditions. Consult a healthcare professional for accurate medical diagnoses.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:MESTEK IR01C Digital Infrared Thermometer Gun User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>