CHAUVET DJ DJ ILS Command Controller Sweetwater User Guide

Command
Quick Reference Guidehttps://www.chauvetdj.com/products/ils- command/#downloads
Scan the QR code to access the product page,
warranty terms, and the complete User Manual

Safety Notes

These Safety Notes include important information about installation, use, and maintenance of the ILS Command.

• ALWAYS:
  • **** Connect to a grounded circuit.
  • Connect to operating voltages as specified on the product’s spec sticker.
  • Disconnect from its power source during periods of inactivity.
  • Heed all restrictions and warnings on the spec sticker.
  • Mount in a location with at least 20 in (50 cm) of ventilation.
• In the event of a serious operating problem, stop using immediately.
• DO NOT:
  • Open this product or attempt any repairs. It contains no user-serviceable parts.
  • Use if the power cord is crimped or damaged.
  • Disconnect by pulling on the power cord.
  • Allow flammable materials close to the product when it is operating.
  • Connect to a dimmer or rheostat.
  • Carry the product by its power cord.
  • Operate in temperatures higher than 104°F (40°C).
  • Expose to environments that exceed the Ingress Protection (IP) rating.
  • Expose to rain or moisture.
  • Use outdoors.
  • Set this product on a flammable surface.

FCC Compliance AND RF Exposure Warning for North America and Australia
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located for operating in conjunction with any other antenna or transmitter.

What is Included

• ILS Command
• External power supply
• USB-C cable
• Carry bag
• Quick Reference Guide

ILS Connection
The ILS Command uses the 3-pin XLR connection and D-Fi for wireless connection to the Integrated Lighting System (ILS) ecosystem (patent pending).

Control Panel Overview

Control Panel Description

set the currently selected value into the selected function
Press and hold for 3 seconds to lock and unlock the ILS Command
Rotate to navigate through the menu list, to increase or decrease numeric values in a function, and to program the pan of moving heads for follow spot mode