RAIDER RD-WC09 Wet and Dry Vacuum Cleaner User Manual
- June 13, 2024
- Raider
Table of Contents
RAIDER RD-WC09 Wet and Dry Vacuum Cleaner
Product Information
| Brand | RAIDER POWER TOOLS |
|---|---|
| Product | Wet & Dry Vacuum Cleaner |
| Model | RD-WC09 |
| Power Supply | 230V AC, 50Hz |
| Power Consumption | 1250W |
| Tank Capacity | 20L |
| Airflow Rate | 4100 L/min |
| Vacuum Pressure | 15 kPa |
| Noise Level | 80 dB |
Product Usage Instructions
- Ensure the power supply is compatible with the product: 230V AC, 50Hz.
- Connect the vacuum cleaner to a suitable power outlet using a 16A plug.
- Refer to the instruction manual booklet for detailed usage instructions.
- Ensure the tank is empty before use.
- Choose the appropriate nozzle or attachment for the desired cleaning task.
- Switch on the vacuum cleaner using the ON/OFF button (No. 3).
- Direct the nozzle or attachment to the area that requires cleaning.
- Move the vacuum cleaner across the surface to collect dirt and debris.
- Monitor the tank’s fill level and empty it when necessary.
- Switch off the vacuum cleaner after use.
The pictures are for illustration purpose. The pattern shown may not be exactly the same as the machine you purchased
View and components
- Handle
- ON / OFF switch
- Chapter
- Filter
- Safety valve
- Lock hook
- Container
- Suction hose connection
- Blow hole
- Flexible suction hose
- Suction pipe
- Combination tip
- Wheels
- Garbage bag
- Filter
- Tip for hard-to-reach places
- Storage hook for cable
- Screw (4 pcs.)
Original instructions for use
Dear users,
Congratulations on purchasing a machine from the fastest growing brand for
electric, gasoline and pneumatic machines – RAIDER. When installed correctly
and operation, the RAIDER are safe and reliable machines and working with them
will deliver a real pleasure. For your convenience, an excellent service
network with 45 the service center throughout the country.
Before using this machine, please read it carefully “Instructions for use”.
In the interest of your safety and in order to ensure the correct and use,
read these instructions carefully, including the recommendations and the
warnings in them. To avoid unnecessary mistakes and accidents, it is important
that these instructions to remain available for future reference to all who
will use them the machine. If you sell it to a new owner, the “Instructions
for use” must transmitted along with it so that the new user can familiarize
himself with the relevant ones safety measures and operating instructions.
“Euromaster Import Export” Ltd. is an authorized representative of the
manufacturer and owner of the RAIDER trademark. The management address of the
company is Sofia 1231, Lomsko Shose Blvd. 246, phone: 0700 44 155,
www.raider.bg;
www.euromasterbg.com; e-mail:
[email protected].
Since 2006, the management system has been introduced in the company ISO
9001:2008 quality with certification scope: Trade, import, export and service
of professional and hobby electric, pneumatic and mechanical tools and general
hardware store. The certificate is issued by Moody International Certification
Ltd, England
TECHNICAL DATA
- parameter measure unit of value
- Model – RD-WC09
- Nominal supply voltage V AC 230
- AC frequency Hz 50
- Power W 1250
- Waste container volume L 20
- Maximum vacuum kPa 15
- Maximum airflow L/min 4100
- Degree of protection IP 24
- Insulation protection class – II
- Sound power level LWA KWA = 3 dB dB 80
When using the devices, you must observe some precautions related with safety to prevent them injuries and damages. For this purpose carefully read this user guide/instructions for safety. Keep it well to have with the information at any time. In case of you need to pass the device on to other people, please give them this user manual. We do not we accept responsibility for accidents or damages, which arise as a result of non-compliance this manual and the safety instructions.
Safety instructions
-
Attention : Before installation and start-up in operation must be observed the instructions for use. Check if the mains voltage on the nameplate matches the mains voltage. Connect only to proper 230 volt sockets, ~ 50 Hz. Fuse min. 16 A. Pull
plug when: the appliance is not in use, before the appliance must be opened before cleaning and maintenance. Never clean the appliance with solvents. Do not pull the plug from the socket for the cable. -
Do not leave an appliance ready for use without supervision.
-
Keep out of reach of children.
-
Care must be taken about this, the network cable not to be injured or damaged by being stepped on, pressing, pulling and the like.
-
The device should not be used if the condition of the network cable is not flawless.
-
When changing the network cable, you must not deviate from those specified by the manufacturer requirements.
-
Mains cable: H 05 VV – F 2 x 0.75 mm2.
-
Do not in any case suck: burning matches, smoldering ashes and cigarettes cinders, flammable, corrosive, flammable or explosive substances, vapors and liquids.
-
This appliance is not suitable for extracting hazardous materials for health powders.
-
Store the device in dry rooms.
-
Do not operate a damaged appliance.
-
Use the device only for the activities for which was constructed.
-
When cleaning stairs, the maximum is required attention
-
Use only original equipment and spare parts.
Intended use
- The vacuum cleaner for dry/wet cleaning is suitable for dry and wet cleaning using the appropriate filter. The device is not intended for suction of flammable, explosive or health-hazardous substances.
- The machine must only be used in its purpose. Any further beyond this use is not intended. For resulting damage or injury from any kind of responsibility lies with the user/ the service person, not the manufacturer.
Before commissioning
Attention!
The device should only be connected to sockets type shuko!
Installation of the device.
- The upper part of the vacuum cleaner is fixed with the closing buttons for the vessel. For filming top, press the closing buttons.
- When installing the upper part, pay attention to correct fixing of the closing buttons.
Installation of the filter
Attention!
Never use the vacuum cleaner for dry/ wet cleaning without filter!
Installation of the suction hose.
Connect depending on the application case the suction hose to the
corresponding terminal of the vacuum cleaner for dry/wet cleaning.
Suction
Connect the suction hose to the outlet for the suction hose.
Blowing.
Connect the suction hose to the outlet inhalation.
To extend the suction hose can to place one or more elements on the suction
pipe to the suction hose. Starter switch.
On/Off.
- To turn on the vacuum cleaner, press the button.
- To turn off the vacuum cleaner, press button again.
Cleaning, maintenance.
- Attention! Unplug before starting of each cleaning.
- Maintain protective devices, the air slots and motor housing uncontaminated by dust and dirt as it is possible. We recommend you to clean the appliance immediately after each use.
- Clean the device regularly with a damp cloth and some liquid soap. Do not use cleaners preparations or solvents; the same could to corrode the plastic parts of the device.
Cleaning the waste container
- The court may, depending on the contamination, yes be cleaned with a damp cloth and a little liquid soap or under running water.
- Check the vacuum cleaner filter regularly before each use
Environmental protection.
- In order to protect the environment the power tool, the extras fixtures and packaging must be subjected to appropriate processing for the reuse of their contents raw materials.
- Do not dispose of power tools at household waste! According to the Directive of European Union 2012/19/EC concerning exits from use electrical and electronic devices and the approval and as a national law power tools that cannot be use more, they should be collected separately and undergo appropriate processing for utilization of their contents valuable raw materials.
EUROMASTER IMPORT EXPORT LTD 1231, Sofia, Bulgaria, 246 Lomsko shose Blvd.,
tel.: +359 700 44 155
fax : + 359 2 934 00 90
www.euromasterbg.com;
e-mail: [email protected]