LINOVISION POE-EXT6002GP Outdoor PoE Extender User Manual

LINOVISION POE-EXT6002GP Outdoor PoE Extender

Product Information

The product is a versatile and compact device designed to perform multiple functions. It is equipped with advanced technology and features to enhance user experience and efficiency. The product is suitable for various applications and can be used in both professional and personal settings.

Key Features:

• Compact and portable design
• Advanced technology for superior performance
• Multiple functions for versatile usage
• Intuitive user interface for easy operation
• Durable construction for long-lasting use

Product Usage Instructions

1. Before using the product, ensure that it is placed on a stable and flat surface.
2. Connect the power cable to the designated port on the product and plug it into a power outlet.
3. Turn on the product by pressing the power button located on the front panel.
4. The product’s display will show the main menu. Use the navigation buttons to select the desired function.
5. Once the function is selected, follow the on-screen prompts and instructions to use it effectively.
6. For detailed information on each function, refer to the user manual provided with the product.
7. To switch between different functions, go back to the main menu by pressing the menu button.
8. After using the product, turn it off by pressing and holding the power button until the device shuts down.
9. Disconnect the power cable from the product and unplug it from the power outlet.
10. Clean the product regularly with a soft cloth to remove dust and dirt.

For any further assistance or troubleshooting, please refer to the user manual or contact our customer support.

Package Contents

Check the following contents of your package:

• PoE Extender x 1
• User Guide x 1
• Wrench x 1
• Accessories (water joint)

If any part is lost and damaged, please contact your local agent immediately.

Introduction

• This Product is a Gigabit IP67 waterproof PoE extender independently developed by our company. It supports one RJ45 (PD) port in and 90W input(IEEE802.3bt). Two ports have PSE function, each supporting up to 30W output, without configuration, plug and play.
• Professional room shell design, adapted to various harsh environments, with high stability, reliability, industrial level, wide temperature. The whole machine does not need power adapter, so it is convenient for harsh outdoor environment . reliable power for outdoor work AP, cameras etc.

Hardware Description

Front Panel
The front panel composed by PSE output port，input port and relevant indicator, as shown below:

LED indicator

Indicates the link through that port is successfully established at 10/100/1000Mbps.

Blink: transmitting data and power

Left Panel
Schematic diagram of left panel: input port (PoE In) and grounding column, Standard network Cate5 cable (line diameter 5.5mm).

Right Panel
Schematic diagram of right panel: the output port (PoE out) requires the use of standard network cate5 cable (Line diameter 5.5mm).

Installation

This part describes how to install your machine and make connections to it. Please follow the following instructions in avoid of incorrect installation causing device damage and security threat.

• The nuts of the waterproof joint should be tightened in full fit with the joint’s thread and fit to the hexagon plane, otherwise it is easy to get water and damage the machine;
• Do not place the machine on an unstable case or desk. The machine might be damaged severely in case of a fall;
• Make sure that the operating voltage is the same one labeled on the machine;
• Do not open the chassis while the machine is operating or when electrical hazards are present to avoid electrical shocks.

Desktop Installation
Install the machine on a desktop, place the machine carefully on the counter, the bottom is as follows:

Wall-mounted installation

Please follow these steps to install the machine:
First fix the four screws on the wall (screw cap diameter recommended 5.5-6.5mm) and turn the machine upside down. Align the four fixing holes of the machine as shown below and hang the machine smoothly on the screws.

Application diagram of PoE injector:

Specifications

10/100/1000Mbps RJ45 port
Standard| IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3at, IEEE802.3bt， IEEE802.3x
Network Media(Cable)| 10BASE-T: UTP category 3,4,5 cable (≤100m)

100BASE-TX: UTP category 5 cable (≤100m)

1000BASE-T: UTP category 5e cable (≤100m)

Dimensions (LWH)| 1507344MM
PoE input| 90W Max
PoE power output| 48-55V DC       Port1:30W Max    Port2:60W Max
PSE Power on RJ-45| Anode3/6                        Cathode1/2 Anode4/5 Cathode7/8
Temperature| Operating Temperature: -20°C ~ 60 °C

Storage Temperature：-40 °C ~ 80 °C

Humidity| Operating Humidity: 10% ~ 90% non-condensing

Storage Humidity: 5% ~ 90% non-condensing

Waterproof rate| IP67
Hazardous rating| IK10

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>