hidealite 202308 Optic L G2 Quick ISO DALI User Guide
- June 13, 2024
- hidealite
Table of Contents
- hidealite 202308 Optic L G2 Quick ISO DALI
- Product Information
- Product Features
- Product Usage Instructions
- PRODUCT SPECIFICATION
- DIMENSION
- SAFETY INSTRUCTION
- Installation
- Replacement of light source
- Push 230V – Luminaires not in sync
- ABOUT COMPANY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hidealite 202308 Optic L G2 Quick ISO DALI
Product Information
- Name: Optic L G2 Quick ISO DALI
- LED Color: White
- LED Power: 7.5W
- LED Color Temperature: 2000-2700K, 2700K, 3000K
- IP Rating: IP20 (IP44 for White 7.5W)
- Driver Type: DALI-driver
- Input Voltage: 230V
- Lifetime: 100,000 hours
Product Features
- Replaceable (LED only) light source
- Approved for installation directly against insulation
- Sustainability-focused with recycled materials
Product Usage Instructions
- Prior to installation, carefully read and keep the user manual for future reference.
- The installation of the luminaire should be done by a qualified electrician in accordance with local regulations.
- Before installation or maintenance, ensure that the power is switched off.
- If using a cable, provide strain relief for the cable.
- If using a flex tube, provide strain relief for the flex tube.
- If using DALI control, push the 230V button.
- The luminaire is suitable for IP20-rated installations (or IP44-rated for White 7.5W).
- For more information on symbols used, refer to www.hidealite.se.
Note: We reserve the right to change specifications at any time.
PRODUCT SPECIFICATION
DIMENSION
SAFETY INSTRUCTION
Read these instructions carefully before commencing installation and retain for future reference. The luminaire should be installed by a licensed electrician and in accordance with local regulations. Make sure that the power is off before installation or maintenance.
Installation
Replacement of light source
Push 230V – Luminaires not in sync
One or more luminaires do not sync with the rest.
- Step 1 Press and hold the button. The luminaires are either dimmed up or down. (the turned off will dim, the turned on will dim down)
- Step 2 Briefly press the button to turn off all luminaires
- Step 3 Press and hold the button. All luminaires now dim from min. level and up. The reset is now complete.
ABOUT COMPANY
- Elektro Elco AB, Tallvägen 5, SE-56435 Bankeryd, Sweden
- info@elco.se
- www.hidealite.se
- www.hidealite.fi
- www.hidealite.no
- www.hidealite.dk
References
- Vi udvikler og sælger LED belysning - Hidealite
- LED-belysning, downlights, spotlights och utendørs belysning av topp kvalitet - Hidealite
- Hide-a-lite - LED-belysning & LED-armaturer för ditt projekt! - Hide-a-lite
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>