VEVOR CC-CZJL-2.5 Workbench Caster Wheels User Manual
- June 13, 2024
- VEVOR
Table of Contents
TOUGH TOOLS, HALF PRICE
RKBENCH CASTERS
USER MANUAL
MODEL:CC-CZJL-2.5
We continue to be committed to provide you tools with competitive price.”Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and dose not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
CC-CZJL-2.5 Workbench Caster Wheels
MODEL: CC-CZJL-2.5
NEED
HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
MOUNTING INSTRUCTION
Mark your drill points on the workbench leg at 2” and 4-3/4” from the bottom
of the leg.(Figure 1 ) Drill two pilot holes on each workbench leg.|
---|---
Install Pedal Bracket Assembly to the workbench leg with Wood Screws
Provided.(Figure 1 ) Attach Caster to Pedal Bracket Assemble using Nuts and
Lock Washer
provided.(Figure 2 )|
Note:
1)you may need to remove the caster from the caster plate to attach and secure
the Pedal Bracket Assem bly to the workbench leg. 2) If your workbench leg is
smaller than 2″, you can choose the centre drill
point.(Figure 3) otherwise you|
could choose the drill points at both side to install which is more stability.
(Figure 4)|
Other Installations The workbench casters can be used on many different table
or stands other than workbenches. This includes router table stands, lather
stands or anywhere in your shop where you need mobility for a larger item.
When installing the casters on metal stands you will need to use nuts, bolts
and washers (not included) to properly secure the assembly. ( Figure 5)
The same process as shown above should be followed.|
Address ：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA : Sanven Technology Ltd., Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
| Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United
Kingdom
---|---
| SHUNSHUN GmbH 9 Z2021, 76351 Linkenheim-Hochstetten, Germany
MADE IN CHINA
Technical Support and E-Warranty Certificate
www.vevor.com/support