Westfalia 992012 Power LED Light Bar User Manual

: June 13, 2024
: Westfalia

Table of Contents

Westfalia 992012 Power LED Light Bar
Product Information
Product Usage Instructions
OVERVIEW
OPERATION
EU DECLARATION OF CONFORMITY
CUSTOMER SERVICES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Westfalia 992012 Power LED Light Bar

Westfalia-992012-Power-LED-Light-Bar-product

Product Information

The Slim Power LED Light Bar is a versatile lighting device that can be used for various purposes. It is equipped with LED lamp beads and has a built-in magnet for easy attachment. The housing is made of durable aluminium alloy and comes with a lampshade. The light bar also features a motion detector and a charging LED. It is powered by a 3.7V, 800mAh Li-Polymer battery and has a length of 29.5cm. The light bar weighs 95g and produces a brightness of 90lumens with a color temperature of 6000K.

Product Usage Instructions

Safety Notes

Please read the instruction manual carefully and use the device only according to the provided instructions.
Dispose of used packaging material properly or store it out of the reach of children to avoid suffocation hazards.
Caution: The light beam of this product can be harmful to the eyes. Do not stare directly into the LEDs or direct the light beam towards people or animals. Avoid using devices that strongly focus light to view the light beam.
Do not use the product if the housing is damaged. Do not disassemble or attempt to repair the unit yourself.
Recharge the battery only with the provided charger cable and avoid charging the product outdoors.
Take special care of the product to prevent dropping it onto hard surfaces.
Dispose of the batteries properly together with the device. Do not put cordless devices in household waste.

Charging the Battery
Before using the Slim Power LED Light Bar, make sure to fully charge the battery. Use the provided charger cable to connect the charging port of the light bar to a power source. The charging LED will indicate the charging status. Once fully charged, disconnect the charger cable.

Usage
To turn on the light, switch the EN OFF – ON – AUTO switch to the desired mode. The AUTO mode utilizes the motion detector to automatically turn on the light when it is dark. Make sure the light bar is positioned in a suitable location for motion detection.

Attaching Magnets
The Slim Power LED Light Bar comes with built-in magnets for easy attachment. To attach the light bar to a metal surface, simply place it against the surface and the magnets will hold it in place.

Cleaning and Storage
To clean the light bar, use a soft cloth or sponge dampened with water or mild detergent. Avoid using abrasive cleaners or solvents that may damage the surface. After cleaning, make sure the light bar is completely dry before storage.

Technical Specifications

Battery: 3.7V, 800mAh Li-Polymer
Length: 29.5cm
Charging Time : Approximately 130 minutes
Charging Por t: USB-C
Weight: 95g
Power: 7.2W
Brightness: 90 lumens
Color Temperature : 6000K

OVERVIEW

OFF – ON – AUTO Switch
Charing port USB- C
Motion detector / charging LED
LED lamp bead
Built-in magnet
Aluminium alloy housing
Lampshade
3M plastic iron sheet

SAFETY NOTES
Please note the following safety notes to avoid malfunctions, damage or physical injury

Please read this manual carefully and use the device only according to this manual.
Dispose of used packaging material carefully or store it out of the reach of children. There is a danger of suffocation!
Caution: The light beam of this article could put your eyes at risk.
Do not stare directly into the LEDs and do not direct the light beam towards people or animals.
Do not use devices which can strongly focus light for viewing the light beam.
Do not use the article furthermore if the housing has become damaged. Do not disassemble the unit and do not attempt to repair it yourself.
Recharge the battery only with the provided charger cable.
Do not charge the article outdoors.
Take special care of the article, avoid dropping it onto any hard surface and do not subject it to pressure or any other form of mechanical stress. Keep the article away from extreme heat and cold.
Only charge, operate and store the article at an ambient temperature between10 °C and 40 °C
Only mount the light on normally or hardly inflammable surfaces.
Do not disassemble or attempt to repair the device. The device does not contain any parts that you can replace or repair. If you have any questions or problems, contact our customer service.

Cordless devices do not belong in household waste.
The batteries must be properly disposed of together with the devices.

OPERATION

$Westfalia-992012-Power-LED-Light-Bar $1$$

Charging the battery
Connect the charging socket (5) of the LED bar to a suitable USB port using the supplied USB charging cable or to a mains socket using a mains adapter.

Important: Charging only works with a USB-A to USB-C charging cable. During the charging process, the charging LED (3) in the motion detector lights up red. The bar is fully charged as soon as the LED lights up green. After charging is complete, disconnect the lamp from the charging cable.

Use

Push the ON/OFF button (1) once to the middle position. The light is turned on. It burns constantly.
Push the button (1) again to the last position (AUTO). The light is switched on and switches off automatically after 15 seconds if there is no movement.

Note: Motion detector only turns on the light when it’s dark.

Attaching the magnets

Place the 3M plastic iron foil (8) with integrated magnet on the back of the LED light guide.
Peel off the 3M tape and stick the lamp where you want to install it.

Cleaning and storage

Only clean the clip-on light with a dry or slightly damp cloth. Do not use harsh chemicals or abrasives for cleaning.
Do not immerse the light bar in liquids of any kind.
Store the light bar indoors in a dry place that is protected from dust, dirt and extreme temperatures.
Store the light bar out of the reach of children.
Charge the light bar about every 3 months to avoid deep discharge of the battery.

Technical Data

Battery: 3,7 V, 800 mAh, Li-Polymer
Power Cable Length : 29,5 cm
Charing time : approx. 130 min.
USB-C :5 V, max. 2 A
Dimensions: 250 x 38 x 7 mm
Weight approx. : 95.g
LED: 7,2 W, 90 lm, 6000 K
PIR: 120° ~3-5 m

EU DECLARATION OF CONFORMITY

We, the Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen, declare by our own responsibility that the product Slim Power LED Light Bar Article No. 99 20 12 is according to the basic requirements, which are defined in the European Directives and their amendments.

2011/65/EU : Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)
2014/30/EU : Electromagnetic Compatibility (EMC) EN IEC 55015:2019+A11, EN 61547:2009

The technical documentations are on file at the QA department of the Westfalia Werkzeug-company. Hagen, den 25. Juli 2023 Hagen, 25th of July, 2023

QA Representative

CUSTOMER SERVICES

DEUTSCHLAND

Westfalia Werkzeugstraße 1
D-58093 Hagen
Telefon: (0180) 5 30 31 32
Telefax: (0180) 5 30 31 30
Intewww.westfalia.dernet: www.westfalia.de

ÖSTERREICH

Westfalia
Moosham 31
A-4943 Geinberg OÖ
Telefon: (07723) 4 27 59 54
Telefax: (07723) 4 27 59 23
Internet: www.westfalia-versand.at

SCHWEIZ

Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch

DISPOSAL

Dear Customer
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.3