SENA TUFFTALK-02 Long Range Bluetooth Communication Headset User Guide
- October 31, 2023
- Sena
Table of Contents
SENA TUFFTALK-02 Long Range Bluetooth Communication Headset
BASIC OPERATION
Operating the Buttons
-
Tap the button
-
Double tap the button
-
Press and hold the button for 5 seconds
-
Press the two buttons at the same time
-
Rotate the Jog Dial
Turning On/Off the Headset
ON You will hear ascending beeps.
“Hello”
OFF You will hear descending beeps.
“Goodbye”
Simultaneously press and hold the Jog Dial and the Phone Button for 1 second to turn on or off the headset.
Adjusting the Volume
Adjusting the Volume
You will hear a beep when the volume reaches the maximum or minimum level.
Checking the Battery Level
Blinking 70~100%
Blinking 30~70%
Blinking 0~30%
Turn on the headset and check the battery level via the Status LED.
High” 70~100%
Medium” 30~70%
“Low” 0~30%
Or, press and hold the Jog Dial and the Phone Button for 5 more seconds when the headset turns on. You will hear a triple beep and a voice prompt.
PAIRING
Pairing with Mobile Devices – Phone, Music
Using Phone Features
After Pairing…
Answering Calls
Ending Calls
until you hear a beep
Rejecting Calls
until you hear a beep
Making Calls
Using the Phone Keypad
Using the Voice Dialer
Using the Speed Dial
You will hear a beep.
“Speed dial”
Voice Menu
- Last number redial
- Speed dial 1
- Speed dial 2
- Speed dial 3
- Cancel
Listening to Music
After Pairing…
Playing or Pausing Music
until you hear a double beep
Tracking Forward or Backward
Rotate While Pressing
INTERCOM
Follow the steps above to pair with two or more headsets.
Using the Intercom
After Pairing…
You can start or end a two-way intercom conversation with each headset.
USEFUL FUNCTIONS
Turning On/Off the Ambient Mode
Using the Built-in Two-way Radio
First, connect the two-way radio cable with the headset.
RADIO
Turning On/Off the FM Radio
You will hear a double beep sound.
“FM on” or “FM off”
Seeking Stations
Rotate While Pressing
Listening to Preset Stations
Saving or Deleting Stations
To Save
“Preset (#)”
“(#)”
“Save preset (#)”
To Delete
“Delete preset (#)”
SETTING
Method1) Using the headset
You will hear a double beep sound
Configuration menu”
Method2) Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena Device Manager and click DEVICE SETTING to configure the headset settings
For details about downloading the Sena Device Manager, refer to the leaflet included in the package.
Method3) Using the Sena Industrial App
- On your smartphone, download the Sena Industrial App for Android or iPhone from Google Play or App Store. Refer to senaindustrial.com for more details.
- Pair your smartphone with the headset.
- Run the Sena Industrial App. Swipe the screen to the right and tap Settings to configure the headset settings.
TROUBLESHOOTING
Factory Reset
If you want to restore the Tufftalk to factory default settings, press and hold the Phone Button for 10 seconds. Tap the Jog Dial. The headset automatically restores the default settings and turns off.
Fault Reset
If the Tufftalk is not working properly for any reason, push the pin-hole reset button located below the left ear cup
OPTIONAL CABLE ACCESSORIES
TUFFTALK-A0110
2-way Radio Cable for Kenwood
Twin-pin Connector
TUFFTALK-A0111
2-way Radio Cable for Motorola
Twin-pin Connector
TUFFTALK-A0112
2-way Radio Cable for Motorola
Single-pin Connector
TUFFTALK-A0113
2-way Radio Cable for Icom Twin-pin
Connector
TUFFTALK-A0114
2-way Radio Cable for Yaesu Single-pin
Connector
TUFFTALK-A0115
2-way Radio Cable for Midland Twin-pin
Connector
TUFFTALK-A0116
2-way Radio Cable with an Open End
TUFFTALK-A0117
2-way Radio Cable with Straight Type for
Midland or Icom Twin-pin Connector
BASIC OPERATION
Operating the Buttons
-
Tap the button
-
Double tap the button
-
Press and hold the button for 5 seconds
-
Press the two buttons at the same time
-
Rotate the Jog Dial
Turning On/Off the Headset
ON You will hear ascending beeps.
“Hello”
OFF You will hear descending beeps.
“Goodbye”
Simultaneously press and hold the Jog Dial and the Phone Button for 1 second to turn on or off the headset.
Adjusting the Volume
You will hear a beep when the volume reaches the maximum or minimum level.
Checking the Battery Level
Blinking 70~100%
Blinking 30~70%
Blinking 0~30%
Turn on the headset and check the battery level via the Status LED.
“High” 70~100%
“Medium” 30~70%
“Low” 0~30%
Or, press and hold the Jog Dial and the Phone Button for 5 more seconds when the headset turns on. You will hear a triple beep and a voice prompt.
Charging the Battery
PAIRING
Pairing with Mobile Devices – Phone, Music
Using Phone Features
After Pairing…
Answering Calls
Ending Calls
until you hear a beep
Rejecting Calls
until you hear a beep
Making Calls
Using the Phone Keypad
Using the Voice Dialer
Using the Speed Dial
You will hear a beep.
“Speed dial”
Voice Menu
- Last number redial
- Speed dial 1
- Speed dial 2
- Speed dial 3
- Cancel
Listening to Music
After Pairing…
Playing or Pausing Music
until you hear a double beep
Tracking Forward or Backward
Rotate While Pressing
INTERCOM
Pairing with Other Headsets
Follow the steps above to pair with two or more headsets.
Using the Intercom
After Pairing…
You can start or end a two-way intercom conversation with each headset
USEFUL FUNCTIONS
Turning On/Off the Ambient Mode
Using the Built-in Two-way Radio
RADIO
Turning On/Off the FM Radio
You will hear a double beep sound
“FM on” or “FM off”
Seeking Stations
Listening to Preset Stations
Saving or Deleting Stations
To Save
“Preset (#)”
“(#)”
“Save preset (#)”
To Delete
“Delete preset (#)”
SETTING
Method1) Using the headset
You will hear a double beep sound
Configuration menu”
Method2) Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena Device Manager and click DEVICE SETTING to configure the headset settings.
For details about downloading the Sena Device Manager, refer to the leaflet included in the package.
Method3) Using the Sena Industrial App
-
On your smartphone, download the Sena Industrial App for Android or iPhone from Google Play or App Store.
Refer to senaindustrial.com for more details. -
Pair your smartphone with the headset.
-
Run the Sena Industrial App. Swipe the screen to the right and tap Settings to configure the headset settings.
TROUBLESHOOTING
Factory Reset
If you want to restore the Tufftalk to factory default settings, press and hold the Phone Button for 10 seconds. Tap the Jog Dial. The headset automatically restores the default settings and turns off.
Fault Reset
If the Tufftalk is not working properly for any reason, push the pin-hole reset button located below the left ear cup.
OPTIONAL CABLE ACCESSORIES
TUFFTALK-A0110
2-way Radio Cable for Kenwood
Twin-pin Connector
TUFFTALK-A0111
2-way Radio Cable for Motorola
Twin-pin Connector
TUFFTALK-A0112
2-way Radio Cable for Motorola
Single-pin Connector
TUFFTALK-A0113
2-way Radio Cable for Icom Twin-pin
Connector
TUFFTALK-A0114
2-way Radio Cable for Yaesu Single-pin
Connector
TUFFTALK-A0115
2-way Radio Cable for Midland Twin-pin
Connector
TUFFTALK-A0116
2-way Radio Cable with an Open End
TUFFTALK-A0117
2-way Radio Cable with Straight Type for
Midland or Icom Twin-pin Connector
Quick Reference
| Type | Operation | Button Command | LED |
|---|---|---|---|
| Basic Function | Power on | Press the Phone Button and the Jog Dial for 1 | |
| second | Solid blue | ||
| Power off | Press the Phone Button and the Jog Dial | Solid red | |
| Volume adjustment | Rotate the Jog Dial | – | |
| Ambient Mode | Tap the Ambient Mode Button | – | |
| Two-way Radio | Press and hold the PTT Button | – | |
| Mobile phone | Mobile phone pairing | Press the Phone Button for 5 seconds | Blue |
& red alternatively flashing
Second mobile phone pairing| Press the Jog Dial for 5 seconds| Red flashing
Tap the Phone Button within 2 seconds
Answer mobile phone call| Tap the Phone Button or the Jog Dial| –
End mobile phone call| Tap the Phone Button or press the Jog Dial for 2
seconds| ****
–
Voice dial| Tap the Phone Button| –
Speed dial| Double tap the Phone Button| –
Reject incoming call| Press the Jog Dial for 2 seconds| –
Intercom| Intercom pairing| Press the Jog Dial for 5 seconds| Red flashing
Tap the Jog Dial of any one of the two headsets
Start/End each intercom| Tap the Jog Dial| –
End all intercoms| Press the Jog Dial for 1 second| Blue flashing
Music| Play/Pause Bluetooth music| Press the Jog Dial for 1 second| –
Track forward/back| Rotate the Jog Dial while pressing| –
FM
Radio
| FM radio on/off| Press the Phone Button for 1 second| –
Select preset| Tap the Phone Button| –
Seek stations| Rotate the Jog Dial while pressing| –
Start/Stop scanning FM band| Double tap the Phone Button| ****
–
Save preset while scanning| Tap the Phone Button| –
Reset| Factory reset| Press the Phone Button for 10 seconds| Solid red
Tap the Jog Dial within 10 seconds
Fault reset| Press the Reset Button| –
