Klipsch Fancial Bookshelf Speaker User Manual

June 13, 2024
Klipsch

Klipsch Fancial Bookshelf Speaker

Klipsch-Fancial-Bookshelf-Speaker-product

Klipsch is an iconic brand in the world of audio equipment, but there appears to be an error in the brand name given – it’s been mentioned as “Fancial.” Let’s continue with the review under the assumption that “Fancial” is a sub- brand or model series under Klipsch.

Introduction

The Fancial Bookshelf Speaker by Klipsch presents a promising addition to the audio landscape, striking a fine balance between design, technology, and acoustic quality. Built for audiophiles who refuse to compromise on sound, this speaker offers a rich and immersive experience.

The Fancial Bookshelf Speaker by Klipsch is a testament to the brand’s dedication to delivering top-notch audio equipment. With its high-res audio, flexible connectivity options, and the promise of a non-fatiguing sound, it’s an excellent choice for those looking to upgrade their audio setup. Whether you’re a casual listener or a dedicated audiophile, these speakers are sure to elevate your listening experience.

Design & Build

Sporting dimensions of 7.5 x 5.88 x 9.75 inches and weighing in at 10.8 pounds, the Fancial Bookshelf Speaker has a compact design that is versatile enough to fit comfortably on a bookshelf or as a standalone piece on your table or countertop.

Connectivity

These bookshelf speakers are equipped with USB connectivity, ensuring seamless and smooth data transfer and high-resolution audio playback. This kind of technology is especially significant for those who have their music collections stored digitally and want an unfettered audio experience.

Sound Quality

Hi-Res Audio: One of the most striking features is its Hi-Res Audio capability, ensuring that you experience the nuances and depths of each sound, bringing studio-quality sound right into your living space.

Versatility: Whether you’re using them as front speakers or for surround sound, the Fancial speakers promise an accurate, non-fatiguing sound. This means you can enjoy hours of listening without any discomfort or loss of sound quality.

Compatibility: One of the major advantages of these speakers is their compatibility. They can be seamlessly integrated with most home theater AV receivers, allowing users a plethora of setup arrangements. Whether you have a simple 2.0 system or a more immersive 5.1, 7.1, or even 9.1 setup, these speakers are up to the task.

Product Usage

It’s important to note that these speakers must be connected to an AV receiver or amplifier. This is necessary both for translating the audio signal and for powering the speakers.

What’s in the box?

Upon unboxing, you’ll find the pair of Fancial Bookshelf Speakers, ready to be set up and connected to your sound system.

Usage Instructions

  1. Placement: For optimal sound quality, place the speakers at ear level when in a seated position. Ensure they are placed on a stable surface to avoid any accidental falls.
  2. Connection: Connect the speakers to an AV receiver or amplifier using a USB cable or other appropriate cables. Make sure the connections are secure to prevent any interruptions.
  3. Audio Settings: For the best audio experience, calibrate your speakers according to the acoustics of your room. Many modern AV receivers come with automatic calibration tools.
  4. Multi-Setup Options: Depending on your preference, you can set up the Fancial speakers as front speakers, surround sound, or any configuration suited to your entertainment system.

Maintenance Instructions

  1. Cleaning: Use a soft, lint-free cloth to clean the surface of the speakers. If necessary, dampen the cloth slightly with water. Avoid using abrasive or chemical cleaners which can damage the finish.
  2. Inspection: Periodically inspect cables for signs of wear or damage. Replace them if necessary.
  3. Avoid Direct Sunlight: Prolonged exposure to direct sunlight can fade the speaker’s finish. Place them in a location where they won’t be exposed to direct sunlight for extended periods.
  4. Air Circulation: Ensure there’s adequate space around the speakers for proper air circulation. This helps in preventing any overheating, especially when they are in use for extended periods.

Safety Instructions

  1. Stability: Ensure that the speakers are on a stable surface where they can’t be knocked over easily. If you have children or pets, consider securing the speakers to prevent accidents.
  2. Power Safety: Always unplug the speakers from the power source during thunderstorms or when left unused for extended periods.
  3. Volume Levels: While these speakers are designed for an immersive experience, always start with a low volume and gradually increase. Prolonged exposure to high volumes can damage your hearing.
  4. Water Exposure: Keep the speakers away from water and other liquids. Do not place vases, cups, or any containers with liquids on top or near the speakers.
  5. Ventilation: Ensure that any ventilation slots on the speakers are not covered. This helps in preventing overheating and maintains optimal performance.
  6. Cable Management: Organize and manage cables in a way that they don’t pose a tripping hazard. Consider using cable ties or organizers.

FAQs

What is the warranty for the Fluance HFCW Enhanced Dialogue Speaker?

The Fluance HFCW Enhanced Dialogue Speaker comes with a full lifetime parts and labor manufacturer's direct warranty.

What is the size and weight of the speaker?

The dimensions of the Fluance HFCW Enhanced Dialogue Speaker are 10.6 x 18.9 x 7.3 inches and it weighs 16.3 pounds.

Can the speaker be wall-mounted?

Yes, the Fluance HFCW Enhanced Dialogue Speaker comes with integrated wall mounting brackets (keyhole slots) for versatile setup options.

What are the power handling capabilities of the speaker?

The Fluance HFCW Enhanced Dialogue Speaker has a power handling range of 40 - 120 Watts RMS.

What is the frequency response of the speaker?

The Fluance HFCW Enhanced Dialogue Speaker has a frequency response range of 60Hz - 20KHz.

What is the impedance of the speaker?

The Fluance HFCW Enhanced Dialogue Speaker has an impedance of 8 Ohm, making it compatible with a wide range of audio equipment.

How should I clean the speaker?

To clean the Fluance HFCW Enhanced Dialogue Speaker, use a soft, damp cloth to wipe the surface. Avoid using abrasive cleaners that can damage the finish.

Can I connect the speaker to an amplifier or receiver?

Yes, you can connect the Fluance HFCW Enhanced Dialogue Speaker to an amplifier or receiver using coaxial cables.

How should I position the speaker for optimal sound quality?

Position the Fluance HFCW Enhanced Dialogue Speaker either above or below the screen, ensuring that it projects sound towards the listener.

Is there customer support available for this product?

Yes, Fluance offers lifetime customer support for the Fluance HFCW Enhanced Dialogue Speaker.

Can I register my product with Fluance?

Yes, it is recommended to register your Fluance HFCW Enhanced Dialogue Speaker with Fluance to receive the full benefits of the lifetime warranty and support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals