CLEVAST C19 Compressed Air 3 Gear Electric Air Duster Instruction Manual

CLEVAST C19 Compressed Air 3 Gear Electric Air Duster

Read this manual thoroughly before using and save it for future reference

IMPORTANT SAFEGUARDS

NOTES

1. Because the product contains motor accessories, the motor will rotate quickly during operation, causing slight noise. This is normal, so please do not worry.
2. The product cannot be started while charging to protect the battery. If you need to use it, you can pause the charging process and then use it.
3. To get the maximum use time, it is recommended that the product be fully charged every time before use.
4. To protect the life of the battery, please fully charge it and then store it if it will not be used for an extended period.
5. To prevent battery damage, it is advisable to charge the product once every three months.
6. It is normal for the product to generate some heat during operation, so there is no need to worry.
7. Please do not hesitate to contact us if you encounter any problems with the product. We will respond to your message within 24 hours, and your satisfaction is our greatest reward.

SAVE THESE INSTRUCTIONS

GETTING TO KNOW YOUR COMPRESSED AIR DUSTER

PRODUCT DIAGRAM

PACKAGE CONTENTS

AIR DUSTER NOZZLE

• Nozzle 1: For camera lens/jewellery/phone handset charging port and other items
• Nozzle 2: For swimming ring/beach ball/yoga ball inflation; Air blowing on barbecue charcoal
• Nozzle 3: For PVC swimming pools and inflatable beds, etc
• Nozzle 4: For blowing the dust off the computer host, keyboard, etc
• Brush nozzle 5: Clean up static or thick dust adhesions
• Tube nozzle: Clean up the dust in OA equipment or narrow spaces where tools can not reach out (used with Nozzle 1)

HOW TO USE THE AIR DUSTER FUNCTION
It can be used after installing the air nozzle.(nozzle 1-nozzle 5)

HOW TO USETHE PRESSURIZED AIR FOR AIR NOZZLE FOR AIR INFLATION
The air valve must be opened for rapid air inflation.

As shown below:

• Release the nozzle from the nozzle hole and put it to the air outlet.

VACUUM CLEANER NOZZLE

• Vac nozzle 1: Vacuum dust or debris (Used with Vac nozzle 2)
• Vac nozzle 2: Use to vacuum dust, debris or hair
• Vac brush: Use to vacuum static or thick dust adhesions. (Used with Vac nozzlel)

HOW TO USE THE VACUUM FUNCTION

1. Remove the cover.
2. Install the vacuum nozzle 2.
3. It can also be used with vac nozzle l or vac brush.

SPECIFICATIONS

• Power Supply: DC SV
• Input: 2A
• Charging Time: 3.5-4.SH
• Working Temperature: 14 ‘F-122’F (-l0’C-S0’C)
• Storage Temperature: -2’F-140’F (-10°C-60 °C)
• Product Dimensions: 8.27×5.5lx2.76 in/ 210xl40x70 mm
• Website: www.clevast.com
• Email: support@clevast.com

BEFORE FIRST USE

SETTING UP

1. Carefully remove the product from its packaging. Before use, ensure that the compressed air duster has not been damaged during transportation. If the electrical component is damaged, do not use the Compressed Air Duster. If repairs are needed, please contact customer service personnel.
2. To prevent suffocation, keep packaging materials out of reach of children and pets.

OPERATING INSTRUCTIONS

1. Hold down the power button for 3 seconds to turn on the duster and set the speed to first gear.
2. Press the power button again to change to second gear.
3. Press the power button for the third time to switch to the third gear.
4. Press the power button for the fourth time to change to standby mode. If you do not do anything in standby mode for one minute, it will automatically turn off.
5. To turn off the device while it is turned on, press and hold the power button for an extended period.
6. During use, double-click the button to turn off the light, and double-click again to turn on the light.

INDICATOR INSTRUCTION

1. The red light blinks when charging
2. When fully charged, the green light stays on for a long time.
3. While the unit is working, the green light is on.

HOW TO CHARGE

1. Insert the USB cable into the charging port of the air duster and connect it to a 5V/2A USB outlet, such as a USB charger, mobile phone adapter, laptop, or mobile power supply. The 5V/2A adapter is the best choice to shorten the charging time.
2. When the device is being charged, the indicator light flashes red, and it remains green continuously when fully charged.

CARE & MAINTENANCE

HOW TO CLEAN THE FILTER?

1. Twist to detach the stainless steel filter and HEPA filter.
2. Wash the filters and dust cup with little brush (Dry up the filters and dust cup before use).

STORAGE
To protect the life of the product, please store the product in a dry place.

TROUBLESHOOTING

Problems

The product does not work.

| Reasons

Maybe the power is low battery.

| Solutions

Please fully charge it before use.

---|---|---
Failed to power on the product.| Press and hold the power button for 3 seconds to turn on the product.
No airflow from the Blocked nozzle. nozzle.    Clogged filter.| Replace or clean the nozzle.

Replacefilter.

Weak airflow Partially blocked nozzle. from nozzle.

| ****

Clean nozzle.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Increase the separation between the equipment and the receiver.
• Consult the dealer or an experienced radio/TV technician for help.

WARRANTY INFORMATION

We grant 1 year warranty on the product commencing on the date of purchase. Within the guarantee period, we will eliminate any defects in the appliance resulting from faults in materials or workmanship. Please contact us at: support@clevast.com to launch a warranty claim. This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorized persons and if original product parts are not used.

CUSTOMER SUPPORT

1. lf you have any product questions or concerns, please don’t hesitate to contact us directly at support@clevast.com or visit our website at: www.clevast.com.
2. We have a hassle-free warranty and customer service team for satisfactory solutions to any issue you might have.

• WWW.CLEVAST.Com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>