W-TEC 25330 Shoe/Glove Dryer with Timer User Manual
- June 11, 2024
- w-tec
Table of Contents
W-TEC 25330 Shoe/Glove Dryer with Timer
Product Information
- Product Name: Shoe Dryer WP-S01
- Model: Not specified
- Input Voltage: 220-240V~50/60Hz
- Power: 10W
- Materials: ABS
- Insulation Properties: Class II
- Mass: 356.2 g
- Dimensions: 70.5x28x170 mm
- Noise Level: 20 dB
Product Usage Instructions
- Plug in the power cable to a suitable power outlet.
- Open the heating holes on the control panel.
- Place your shoes on the heating pads inside the dryer.
- Adjust the size of the dryer if necessary.
- Turn on the power switch and set the timer according to your needs using the timer indicators.
- After the set time, turn off the power switch and unplug the power cable from the outlet.
Note: Do not use the product for any purpose other than drying shoes. Do not cover the heating holes during use. Do not touch the heating pads while they are hot.
Maintenance
Clean the product with a dry cloth. Do not use water or any cleaning agents. If any defects or issues arise, contact the seller for assistance.
- Before maintenance, it is necessary to disconnect the product from power supply and wait until it cools down to room temperature.
- First remove dirt and then wipe with a soft spring cloth.
- After cleaning, store in a shady, dry and well-ventilated place.Environment Protection
Dispose of the product according to local laws and regulations. Do not put batteries in household waste, but hand them in to a recycling place.
Terms and Conditions of Warranty, Warranty Claims
The buyer must check the product immediately after delivery for any
defects. The warranty period is 24 months for goods quality, and does not
cover defects resulting from misuse or mishandling of the product. To make a
warranty claim, the buyer must provide proof of purchase and validity of the
claim. The seller reserves the right to reject a warranty claim if the buyer
cannot provide sufficient evidence. If defects are not covered by the
warranty, the seller may require compensation for repair costs.
PRODUCT DESCRIPTION
SAFETY INSTRUCTIONS
- Please read the manual before use and keep it for future reference.
- Do not use the product if the shoes are submerged in water.
- During use, the plastic covers are hot, do not touch them.
- Keep out of reach of children and pets. The dryer is not a toy, kids are forbidden from use.
- Protect power cords from damage.
- Protect the device against impacts.
- Do not use or store near flammable substances and liquids.
- If the product or power cord is damaged, stop using it immediately.
- Before storage, it is necessary to let the device cool down to room temperature.
- Do not try to repair the product yourself at home, always contact the service center.
- Keep away from water, do not wash the device with a stream of water or shower.
- Please read the manual before use and keep it for future reference.
- Do not use the product if the shoes are submerged in water.
- During use, the plastic covers are hot, do not touch them.
- Keep out of reach of children and pets. The dryer is not a toy, kids are forbidden from use.
- Protect power cords from damage.
- Protect the device against impacts.
- Do not use or store near flammable substances and liquids.
- If the product or power cord is damaged, stop using it immediately.
- Before storage, it is necessary to let the device cool down to room temperature.
- Do not try to repair the product yourself at home, always contact the service center.
- Keep away from water, do not wash the device with a stream of water or shower.
USE
- The device is powered by 220-240V~50/60Hz.
- Place the product in the shoes and then switch it on.
- The pads have a universal size.
- The timer can be set to 3, 6, 9 hours, or can be turned off and on as needed.
- After use, the device must be disconnected from power supply.
- The temperature at the bottom of the dryer is approximately 68°C±5°C.
- Suitable for all types of shoes, but for leather/suede or “special materials” e.g. different types of plastic, always consult the manufacturer before use. High temperature could damage the product. Use at your own risk.
- The manufacturer is not responsible for improper use of the dryer or damage to shoes.
- If you are unsure of the shoe material, check with the manufacturer before use.
- Heating holes
- Decoration
- Decoration
- Size adjustment
- Power switch / timer setting
- Timer indicators
SPECIFICATIONS
- Name: Shoe dryer
- Model: WP-S01
- Input voltage: 220-240V~50/60Hz
- Power: 10W
- Materials: ABS
- Insulation properties: II class
- Mass: 356.2 g
- Dimensions: 70.5x28x170 mm
Noise level ≤20 dB Made in China
ENVIRONMENT PROTECTION
After the product lifespan expired or if the possible repairing is uneconomic,
dispose it according to the local laws and environmentally friendly in the
nearest scrapyard.
By proper disposal you will protect the environment and natural sources.
Moreover, you can help protect human health. If you are not sure in correct
disposing, ask local authorities to avoid law violation or sanctions.
Don’t put the batteries among house waste but hand them in to the recycling
place.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated here under determine Warranty Coverage and
Warranty Claim Procedure. Conditions of Warranty and Warranty Claims are
governed by Act No. 89/2012 Coll. Civil Code, and Act No. 634/1992 Coll.,
Consumer Protection, as amended, also in cases that are not specified by these
Warranty rules.
The seller is SEVEN SPORT s.r.o. with its registered office in Strakonická street 1151/2c, Prague 150 00, Company Registration Number: 26847264, registered in the Trade Register at Regional Court in Prague, Section C, Insert No. 116888.
According to valid legal regulations it depends whether the Buyer is the End Customer or not. “The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not conclude and execute the Contract in order to run or promote his own trade or business activities.
The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the purpose of using the Goods or services for his own business activities. The Buyer conforms to the General Purchase Agreement and business conditions.
These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement made between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless otherwise specified in the Purchase Agreement, in the Amendment to this Contract or in another written agreement.
Warranty Conditions
Warranty Period
The Seller provides the Buyer a 24 months Warranty for Goods Quality, unless
otherwise specified in the Certificate of Warranty, Invoice, Bill of Delivery
or other documents related to the Goods. The legal warranty period provided to
the Consumer is not affected.
By the Warranty for Goods Quality, the Seller guarantees that the delivered Goods shall be, for a certain period of time, suitable for regular or contracted use, and that the Goods shall maintain its regular or contracted features.
Batteries
6-month battery warranty – we guarantee that battery’s nominal capacity does
not fall below 70% of its total capacity within 6 months of the product’s
sale.
The Warranty does not cover defects resulting from (if applicable):
- User’s fault, i.e. product damage caused by unqualified repair work, improper assembly, insufficient insertion of seat post into frame, insufficient tightening of pedals and cranks
- Improper maintenance
- Mechanical damages
- Regular use (e.g. wearing out of rubber and plastic parts, moving mechanisms, joints, wear of brake pads/blocks, chain, tires, cassette/multi wheel etc.)
- Unavoidable event, natural disaster
- Adjustments made by unqualified person
- Improper maintenance, improper placement, damages caused by low or high temperature, water, inappropriate pressure, shocks, intentional changes in design or construction etc.
Warranty Claim Procedure
The Buyer is obliged to check the Goods delivered by the Seller immediately after taking the responsibility for the Goods and its damages, i.e. immediately after its delivery. The Buyer must check the Goods so that he discovers all the defects that can be discovered by such check.
When making a Warranty Claim the Buyer is obliged, on request of the Seller, to prove the purchase and validity of the claim by the Invoice or Bill of Delivery that includes the product’s serial number, or eventually by the documents without the serial number. If the Buyer does not prove the validity of the Warranty Claim by these documents, the Seller has the right to reject the Warranty Claim.
If the Buyer gives notice of a defect that is not covered by the Warranty
(e.g. in the case that the Warranty Conditions were not fulfilled or in the
case of reporting the defect by mistake etc.), the Seller is eligible to
require a compensation for all the costs arising from the repair. The cost
shall be calculated according to the valid price list of services and
transport costs.
If the Seller finds out (by testing) that the product is not damaged, the
Warranty Claim is not accepted. The Seller reserves the right to claim a
compensation for costs arising from the false Warranty Claim.
In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by the Seller, the Seller shall fix the reported defects by means of repair or by the exchange of the damaged part or product for a new one. Based on the agreement of the Buyer, the Seller has the right to exchange the defected Goods for a fully compatible Goods of the same or better technical characteristics. The Seller is entitled to choose the form of the Warranty Claim Procedures described in this paragraph.
The Seller shall settle the Warranty Claim within 30 days after the delivery of the defective Goods, unless a longer period has been agreed upon. The day when the repaired or exchanged Goods is handed over to the Buyer is considered to be the day of the Warranty Claim settlement. When the Seller is not able to settle the Warranty Claim within the agreed period due to the specific nature of the Goods defect, he and the Buyer shall make an agreement about an alternative solution. In case such agreement is not made, the Seller is obliged to provide the Buyer with a financial compensation in the form of a refund.
SEVEN SPORT s.r.o.
- Registered Office: Strakonická 1151/2c, Praha 5, 150 00, ČR
- Headquaters: Dělnická 957, Vítkov, 749 01
- Warranty & Service: Čermenská 486, Vítkov 749 0
- CRN: 26847264 VAT ID: CZ26847264
- Phone: +420 556 300 970
- E-mail : eshop@insportline.cz
- Web: www.inSPORTline.cz
SK inSPORTline s.r.o.
- Address: Headquaters, warranty & service center: Električná 6471, Trenčín 911 01, SK
- CRN: 36311723 VAT ID: SK2020177082
- Phone: +421(0)326 526 701
- E-mail: objednavky@insportline.sk
- Web: www.inSPORTline.sk
References
- inSPORTline - největší výrobce a prodejce fitness v ČR
- inSPORTline - najväčší výrobca a predajca fitness v SR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>