jason l 1400×800 Quadro Loop Desk Installation Guide

jason l 1400×800 Quadro Loop Desk

Tools Required

**Sizes:
** 1400×800
1600×800

Tools Required : Power screwdriver; Allen key set (provided)

2 persons required for installation

PARTS

COMPONENTS

• A Table top x1

• B Legs Quadro x2

• C Legs Quadro Loop x2

• D Beam x1

• E Plastic bracket x4
  SCREWS

• F M8x20MM CSK x2

• G M8x20MM Socket head x2

• H M6x20MM Socket head x4

• I M6x30MM Socket head x4

• J Allen key x2

• Colour of the beam is always black, regardless desk frame colour.

ASSEMBLY INSTRUCTIONS

Using Allen Key provided, attach 2 plastic brackets per leg (E) (as per picture above) using M6x20MM (H) Socket head screw. Connect Loop Legs (C) to Bottom of Quadro Legs (B) by using 4 bolts per leg.

Using Allen Key provided, attach M8x20MM Socket head (G)- screw socket half way into leg for both legs (B)

Adjust extendable beam (D) to desired length using markers and secure beam at that length using screws provided

Attach beam (D) to legs (B) using nut insert in legs. See point attached

Frame looks like this. Using Allen Key, attach beam (D) with Socket (F)

Place desktop on top of frame – with cutout at the back of the desk. Nut inserts in top will align with plastic joiner brackets using M6x30MM (I) sockets attached top to frame.

Customer Support

Need help! Call us on 1300 527 665
www.jasonl.com.au

References

• JasonL Office Furniture | Office Furniture Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>